cdu6.fit

数字秒表具有正及时倒计时功能包括一些设计要求和原资料

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 12/27/2008 21:02:42      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cdu6"
BEGIN

    DEVICE = "EPF10K20TC144-4";

    "CLK"                          : INPUT_PIN  = 55     ;
    "CLR"                          : INPUT_PIN  = 54     ;
    "EN"                           : INPUT_PIN  = 56     ;
    "CN"                           : OUTPUT_PIN = 80     ;
    "COUNT60"                      : OUTPUT_PIN = 78     ;
    "COUNT61"                      : OUTPUT_PIN = 32     ;
    "COUNT62"                      : OUTPUT_PIN = 81     ;
    "COUNT63"                      : OUTPUT_PIN = 79     ;
    "|LPM_ADD_SUB:81|addcore:adder|:59" : LOCATION   = LC8_F2 ;
    "|LPM_ADD_SUB:81|addcore:adder|:68" : LOCATION   = LC6_F2 ;
    ":4"                           : LOCATION   = LC2_F2 ;
    ":10"                          : LOCATION   = LC3_F2 ;  -- SCOUNT63
    ":11"                          : LOCATION   = LC1_F2 ;  -- SCOUNT62
    ":12"                          : LOCATION   = LC5_F2 ;  -- SCOUNT61
    ":13"                          : LOCATION   = LC7_F2 ;  -- SCOUNT60
    ":54"                          : LOCATION   = LC4_F2 ;

END;

INTERNAL_INFO "cdu6"
BEGIN
	DEVICE = EPF10K20TC144-4;
    OD5P55  : LORAX = "1:FB5->LC2_F2,->LC3_F2,->LC1_F2,->LC5_F2,->LC7_F2|";
    OD2P54  : LORAX = "1:FB2->LC2_F2,->LC3_F2,->LC1_F2,->LC5_F2,->LC7_F2|";
    OD3P56  : LORAX = "1:FB3|2:FH3R5,PA5R5C1->LC2_F2,->LC3_F2,->LC1_F2,->LC5_F2,->LC7_F2||";
    LC2_F2  : LORAX = "1:MSW1R5C1,HHL11R5->OH9R5P80|";
    LC3_F2  : LORAX = "1:MSW3R5C0,HHL9R5->OH11R5P79|";
    LC1_F2  : LORAX = "1:MSW0R5C1,HHL23R5->OH8R5P81|";
    LC5_F2  : LORAX = "1:MSW4R5C1,G93R5->OH4R5P32|";
    LC7_F2  : LORAX = "1:MSW6R5C1,G53R5->OH14R5P78|";
	LC8_F2  : LORAX2 = "X, LC1_F2, LC7_F2, LC5_F2";
	LC6_F2  : LORAX2 = "X, LC1_F2, LC7_F2, LC5_F2";
	LC2_F2  : LORAX2 = "X, OD3P56, LC2_F2, LC4_F2";
	LC3_F2  : LORAX2 = "OD3P56, LC8_F2, LC4_F2, LC3_F2";
	LC1_F2  : LORAX2 = "OD3P56, LC6_F2, LC4_F2, LC1_F2";
	LC5_F2  : LORAX2 = "OD3P56, LC4_F2, LC5_F2, LC7_F2";
	LC7_F2  : LORAX2 = "X, X, OD3P56, LC7_F2";
	LC4_F2  : LORAX2 = "LC3_F2, LC7_F2, LC1_F2, LC5_F2";
END;