📄 mulx.pin
字号:
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
N.C. = No Connect. This pin has no internal connection to the device.
VCCINT = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
VCCIO = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
GNDINT = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
GNDIO = Dedicated ground pin, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.
----------------------------------------------------------------------------
CHIP "mulx" ASSIGNED TO AN EPF10K20TC144-4
TCK : 1
CONF_DONE : 2
nCEO : 3
TDO : 4
VCCIO : 5
VCCINT : 6
RESERVED : 7
RESERVED : 8
RESERVED : 9
RESERVED : 10
M_10MIN3 : 11
S_10MS1 : 12
S_100MS3 : 13
M_1MIN2 : 14
GNDIO : 15
GNDINT : 16
RESERVED : 17
RESERVED : 18
RESERVED : 19
RESERVED : 20
RESERVED : 21
RESERVED : 22
RESERVED : 23
VCCIO : 24
VCCINT : 25
RESERVED : 26
RESERVED : 27
RESERVED : 28
RESERVED : 29
RESERVED : 30
RESERVED : 31
RESERVED : 32
RESERVED : 33
TMS : 34
nSTATUS : 35
RESERVED : 36
RESERVED : 37
RESERVED : 38
RESERVED : 39
GNDIO : 40
RESERVED : 41
RESERVED : 42
RESERVED : 43
RESERVED : 44
VCCIO : 45
RESERVED : 46
RESERVED : 47
RESERVED : 48
RESERVED : 49
GNDIO : 50
RESERVED : 51
VCCINT : 52
VCCINT : 53
CLR : 54
CLK : 55
EN : 56
GNDINT : 57
GNDINT : 58
M_1MIN1 : 59
HOUR2 : 60
VCCIO : 61
S_1S1 : 62
S_1MS3 : 63
S_10S3 : 64
M_10MIN2 : 65
GNDIO : 66
S_10S1 : 67
S_100MS0 : 68
OUTBCD2 : 69
S_100MS2 : 70
VCCIO : 71
S_100MS1 : 72
HOUR3 : 73
nCONFIG : 74
VCCINT : 75
MSEL1 : 76
MSEL0 : 77
RESERVED : 78
RESERVED : 79
RESERVED : 80
RESERVED : 81
RESERVED : 82
OUTBCD3 : 83
GNDINT : 84
GNDIO : 85
RESERVED : 86
RESERVED : 87
RESERVED : 88
S_1S2 : 89
M_1MIN3 : 90
M_1MIN0 : 91
OUTBCD0 : 92
VCCINT : 93
VCCIO : 94
RESERVED : 95
RESERVED : 96
RESERVED : 97
SEG2 : 98
RESERVED : 99
OUTBCD1 : 100
SEG1 : 101
SEG0 : 102
GNDINT : 103
GNDIO : 104
TDI : 105
nCE : 106
DCLK : 107
DATA0 : 108
RESERVED : 109
S_10S2 : 110
S_1MS1 : 111
S_1S3 : 112
S_10MS2 : 113
S_10MS3 : 114
VCCIO : 115
M_10MIN0 : 116
S_1MS2 : 117
S_10S0 : 118
S_1S0 : 119
HOUR1 : 120
M_10MIN1 : 121
RESERVED : 122
VCCINT : 123
S_10MS0 : 124
HOUR0 : 125
S_1MS0 : 126
GNDINT : 127
RESERVED : 128
GNDIO : 129
RESERVED : 130
RESERVED : 131
RESERVED : 132
RESERVED : 133
VCCIO : 134
RESERVED : 135
RESERVED : 136
RESERVED : 137
RESERVED : 138
GNDIO : 139
RESERVED : 140
RESERVED : 141
RESERVED : 142
RESERVED : 143
RESERVED : 144
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -