cdu6.fit

数字秒表具有正及时倒计时功能包括一些设计要求和原资料

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 12/29/2008 16:02:12      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cdu6"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "CLK"                          : INPUT_PIN  = 1      ;
    "CLR"                          : INPUT_PIN  = 2      ;
    "EN"                           : INPUT_PIN  = 42     ;
    "CN"                           : OUTPUT_PIN = 19     ;
    "COUNT60"                      : OUTPUT_PIN = 17     ;
    "COUNT61"                      : OUTPUT_PIN = 16     ;
    "COUNT62"                      : OUTPUT_PIN = 18     ;
    "COUNT63"                      : OUTPUT_PIN = 10     ;
    "|LPM_ADD_SUB:81|addcore:adder|:59" : LOCATION   = LC8_A1 ;
    "|LPM_ADD_SUB:81|addcore:adder|:68" : LOCATION   = LC6_A1 ;
    ":4"                           : LOCATION   = LC7_A1 ;
    ":10"                          : LOCATION   = LC2_A1 ;  -- SCOUNT63
    ":11"                          : LOCATION   = LC5_A1 ;  -- SCOUNT62
    ":12"                          : LOCATION   = LC1_A1 ;  -- SCOUNT61
    ":13"                          : LOCATION   = LC3_A1 ;  -- SCOUNT60
    ":54"                          : LOCATION   = LC4_A1 ;

END;

INTERNAL_INFO "cdu6"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC7_A1,->LC2_A1,->LC5_A1,->LC1_A1,->LC3_A1|";
    OD1P2   : LORAX = "1:FB1->LC7_A1,->LC2_A1,->LC5_A1,->LC1_A1,->LC3_A1|";
    OD3P42  : LORAX = "1:FB3|2:FH3R0,PA5R0C0->LC7_A1,->LC2_A1,->LC5_A1,->LC1_A1,->LC3_A1||";
    LC7_A1  : LORAX = "1:MSW6R0C1,HHL32R0->OH14R0P19|";
    LC2_A1  : LORAX = "1:MSW1R0C0,V3C0->OV0C0P10|";
    LC5_A1  : LORAX = "1:MSW4R0C0,G50R0->OH12R0P18|";
    LC1_A1  : LORAX = "1:MSW0R0C0,HHL22R0->OH8R0P16|";
    LC3_A1  : LORAX = "1:MSW2R0C1,G2R0->OH10R0P17|";
	LC8_A1  : LORAX2 = "X, LC5_A1, LC3_A1, LC1_A1";
	LC6_A1  : LORAX2 = "X, LC5_A1, LC3_A1, LC1_A1";
	LC7_A1  : LORAX2 = "X, OD3P42, LC7_A1, LC4_A1";
	LC2_A1  : LORAX2 = "OD3P42, LC2_A1, LC8_A1, LC4_A1";
	LC5_A1  : LORAX2 = "OD3P42, LC5_A1, LC6_A1, LC4_A1";
	LC1_A1  : LORAX2 = "OD3P42, LC1_A1, LC4_A1, LC3_A1";
	LC3_A1  : LORAX2 = "X, X, OD3P42, LC3_A1";
	LC4_A1  : LORAX2 = "LC2_A1, LC3_A1, LC5_A1, LC1_A1";
END;