📄 mulx.pin
字号:
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
N.C. = No Connect. This pin has no internal connection to the device.
VCCINT = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
VCCIO = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
GNDINT = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
GNDIO = Dedicated ground pin, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.
----------------------------------------------------------------------------
CHIP "mulx" ASSIGNED TO AN EPF10K10LC84-3
CLK : 1
CLR : 2
S_100MS2 : 3
VCCINT : 4
HOUR2 : 5
HOUR3 : 6
M_1MIN1 : 7
S_1S3 : 8
S_1MS2 : 9
M_1MIN0 : 10
S_100MS3 : 11
DATA0 : 12
DCLK : 13
nCE : 14
TDI : 15
RESERVED : 16
OUTBCD2 : 17
RESERVED : 18
OUTBCD1 : 19
VCCINT : 20
RESERVED : 21
RESERVED : 22
SEG0 : 23
OUTBCD3 : 24
RESERVED : 25
GNDINT : 26
SEG1 : 27
S_10S1 : 28
S_1MS3 : 29
M_10MIN2 : 30
MSEL0 : 31
MSEL1 : 32
VCCINT : 33
nCONFIG : 34
OUTBCD0 : 35
SEG2 : 36
HOUR1 : 37
S_1S0 : 38
S_1S1 : 39
VCCINT : 40
GNDINT : 41
EN : 42
HOUR0 : 43
S_10MS0 : 44
VCCINT : 45
GNDINT : 46
RESERVED : 47
RESERVED : 48
S_10S3 : 49
S_10MS3 : 50
S_100MS0 : 51
S_100MS1 : 52
M_10MIN3 : 53
M_1MIN2 : 54
nSTATUS : 55
TRST : 56
TMS : 57
M_1MIN3 : 58
S_10MS1 : 59
S_10S2 : 60
S_1S2 : 61
S_10S0 : 62
VCCINT : 63
RESERVED : 64
RESERVED : 65
RESERVED : 66
RESERVED : 67
GNDINT : 68
RESERVED : 69
RESERVED : 70
RESERVED : 71
RESERVED : 72
RESERVED : 73
TDO : 74
nCEO : 75
CONF_DONE : 76
TCK : 77
M_10MIN0 : 78
S_1MS1 : 79
M_10MIN1 : 80
S_10MS2 : 81
GNDINT : 82
RESERVED : 83
S_1MS0 : 84
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -