devices.txt

遗传算法工具箱 希望高手指点 GATOOLS

   Copyright (C) 1992, 1995 Aladdin Enterprises.  All rights reserved.
  
  This file is part of Aladdin Ghostscript.
  
  Aladdin Ghostscript is distributed with NO WARRANTY OF ANY KIND.  No author
  or distributor accepts any responsibility for the consequences of using it,
  or for whether it serves any particular purpose or works at all, unless he
  or she says so in writing.  Refer to the Aladdin Ghostscript Free Public
  License (the "License") for full details.
  
  Every copy of Aladdin Ghostscript must include a copy of the License,
  normally in a plain ASCII text file named PUBLIC.  The License grants you
  the right to copy, modify and redistribute Aladdin Ghostscript, but only
  under certain conditions described in the License.  Among other things, the
  License requires that the copyright notice and this notice be preserved on
  all copies.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

This file, devices.txt, gives more detailed documentation about
certain specific devices for which Ghostscript can produce output.

For an overview of Ghostscript and a list of the documentation files, see
README.

Devices for which this file currently contains documentation:
	SPARCprinter
	HP DeskJet 520, 540, and 560C
	HP DeskJet 500C & 550C
	HP PaintJet, XL, and XL300
	DEC LJ250
	Apple Dot Matrix Printer (and Imagewriter)
	Epson Stylus Color Printer
	Canon BJC-600/BJC-4000/BJC-70 and BJC-800 BubbleJet Color Printers
	  (and Apple StyleWriter 2x00)

### ------------------------- The SPARCprinter ------------------------- ###

This section was written by Martin Schulte.

Introduction
------------

The SPARCprinter is is connected to SPARCStation via a special SBUS card's
video inferface, the picture is composed on the host and only a bitmap is
send to the printer unit.

Together with a SPARCprinter, you always buy (as far as I know) software
that enables you to do postscript-printing on your SPARCPrinter.

So, the need for a Ghostscript-Interface to the SPARCPrinter seems low,
but on the other hand some Postscript drawings are not correctly printed
with SUN's software: on some pages occured a thin vertical line of rubbish
(reproducable), on some Mathematica drawings the text at the axes wasn't
rotated.

I tried all of these with Ghostscript and always got the expected results.

However, replacing proprietary software should never be a bad idea.

The problem is that there has yet been no effort to make the SPARCPrinter-
driver behave like a BSD output-filter, I made my tests using the script
mentioned under Installation.

Installation
------------

Add sparc.dev to DEVICE_DEVS and compile ghostscript as described in
make.txt.

Afterwards, you can use the following script (the way of handling standard
input versus filename-arguments doesn't look very clever, has anyone a
better idea ?) to print if you substitute <GSPATH> by the place where you
installed the ghostscript binary:

outcmd1='/vol/local/lib/troff2/psxlate -r'
outcmd2='<GSPATH> -I/home/schulte/gs252 -sDEVICE=sparc -sOUTPUTFILE=/dev/lpvi0 -'

if [ $# -eq 0 ]
then
  $outcmd1 | $outcmd2
else
  cat $* | $outcmd1 | $outcmd2
fi

Problems
--------

Since /dev/lpvi can only be opened for exclusive use, another job having
opened it (engine_ctl_sparc or another ghostscript as the most probable
canidates) will cause to stop ghostscript with "Error: /invalidfileaccess
in --.outputpage--"

In case of common printer problems like out of paper, a warning describing
the reason will be printed to stdout, the driver will try to access again
and again each five seconds.

Due to a problem with the device-driver (in the kernel) the reason of
printer failure is not always correctly reported to program.  This is the
case at least if you open the top cover (Error in the display: E5).  Look
to the display at the printer if a "Printer problem with unknown reason"
is reported.

Fatal errors will cause the print-job to be terminated.

### ------------------------------ End --------------------------------- ###

### ------------------- H-P color inkjet printers ---------------------- ###
###  (DeskJet 500C, DeskJet 550C, PaintJet, PaintJet XL, PaintJet XL300  ###
###  and the DEC LJ250 which can operate in a Paintjet-compatible mode)  ###

This section was written by George Cameron.

Information and tips on usage for the drivers contained in gdevcdj.c
====================================================================

OVERVIEW:

There are 6 generic drivers contained in the source module:

     1 - cdj500:      HP DeskJet 500C and 540C
     2 - cdj550:      HP DeskJet 550C and 560C
     3 - pjxl300:     HP PaintJet XL300 and DeskJet 1200C
     4 - pjtest:      HP PaintJet
     5 - pjxltest:    HP PaintJet XL
     6 - declj250:    DEC LJ250

 All of these drivers have 8-bit (monochrome), 16-bit and 24-bit
     (colour) and for the DJ 550C 32-bit, (colour, cmyk mode)
     options in addition to standard colour and mono drivers.
 It is also possible to set various printer-specific parameters
     from the gs command line, eg.

  gs -sDEVICE=cdeskjet -dBitsPerPixel=16 -dDepletion=1 -dShingling=2 tiger.ps

NB/ The old names cdeskjet, cdjcolor and cdjmono drivers have been retained;
    however, their functionality duplicates that available using the above
    drivers (and cdeskjet is identical to cdj500), ie. we can use:

	gs -sDEVICE=cdj500 -dBitsPerPixel=24 ...	for cdjcolor, and
	gs -sDEVICE=cdj500 -dBitsPerPixel=1  ...	for cdjmono


DEFAULT PAPER SIZE:

 If the preprocessor symbol A4 is defined, the default paper size is the
 European A4 size; otherwise it is the U.S. letter size (8.5"x11"). Other
 paper sizes (including A3 for the PaintJet XL and PaintJet XL300) may be
 specified on the command line as explained in the Ghostscript documentation.


DEFAULT BITS-PER-PIXEL:

 If the preprocessor symbol BITSPERPIXEL is defined as an integer (see below
 for the range of allowable values), this number will be used to define the
 default bits-per-pixel (ie. bit depth) for the generic drivers. If the
 symbol is not defined, the default is set to 24 bits per pixel. It is
 of course still possible to specify the value from the command line, as
 described below. Note also that the cdeskjet, cdjcolor and cdjmono
 drivers are unaffected by setting this symbol, as their default settings
 are predefined to be 1, 3 and 24 respectively.


DESKJET PHYSICAL LIMITS:

 Maximum printing width = 2400 dots = 8". The printer manuals say that the
 maximum recommended printing height on the page is 10.3", but since this
 is obviously not true for A4 paper, and I have been unable to detect any
 problems in printing longer page lengths, this would seem to be a rather
 artificial restriction.

 All Deskjets have 1/2" unprintable bottom margin, due to the mechanical
 arrangement used to grab the paper. Side margins are approximately 0.25"
 for US Letter paper, and 0.15" for A4.


COMMAND LINE PARAMETERS:

 Several printer 'properties' have been implemented for these printers.
 Those available so far are all integer quantities, and thus may be
 specified as eg.

	gs -dBitsPerPixel=32 -dShingling=1 ... 

 which sets the BitsPerPixel parameter to 32 and the Shingling parameter
 to 1.


BITS-PER-PIXEL:

 All of the drivers in gdevcdj.c accept a command line option to set the
 BitsPerPixel property. This gives considerable flexibility in choosing
 various trade-offs between speed/quality/colour etc. The valid numbers
 are:

	1:	This is a standard Ghostscript monochrome driver, and uses
		black ink (by installing the separate mono cartridge in
		the case of the DeskJet 500C, or automatically for the
		other printers)

	3:	A standard Ghostscript colour driver, using internal
		dithering. This is fast to compute and to print, but
		the clustered dithering can lose some detail and
		colour fidelity.

	8:	An 'error-diffusion' monochrome driver which uses
		Floyd-Steinberg dithering to print greyscale images.
		The patterns are much more randomised than with the
		normal clustered dithering, but the data files can
		be much larger and somewhat slower to print.

	16:	This is a 'cheaper' version of the following (24-bit)
		driver, which generates a Floyd-Steinberg colour dithered
		output using the minimum amount of memory (this may be
		helpful when using IBM PC's when Ghostscript has not
		been compiled using a 32-bit 386-style compiler). The
		quality can be almost as good as the 24-bit version.

	24:	A high-quality colour driver using Floyd-Steinberg dithering
		for maximum detail and colour range. However it is very
		memory intensive and thus can be slow to compute (and it
		tends to produce rather larger raw data files, so they
		can also be slower to print).

	32:	This is for the DeskJet 550C only, which uses the black
		cartridge and the colour cartridge simultaneously (ie.
		CMYK printing). This printer can be both faster and give
		higher quality than the DeskJet 500C, because of the
		true black ink. (Note that the 24-bit mode also permits
		CMYK printing on this printer, and uses less memory. Any
		differences between 24-bit and 32-bit should be very small.)


DESKJET PROPERTIES:

 The addional properties available for the DeskJets are:

	BlackCorrect	(int)	  /* Colour correction to give
				   * better blacks when using the DJ500C
				   * in colour mode, eg. the default of 4
				   * reduces the cyan component to 4/5 
				   * Range accepted: 0 - 9 (0 = none) */
	Shingling	(int)	  /* Interlaced, multi-pass printing 
	                           * 0 = none, 1 = 50%, 2 = 25%, 2 is
				   * best & slowest */
	Depletion	(int)	  /* 'Intelligent' dot-removal 
		                   * 0 = none, 1 = 25%, 2 = 50%, 1 best
				   * for graphics? 
				   * Use 0 for transparencies */

PAINTJET XL300/PAINTJET XL PROPERTIES:

	PrintQuality	(int)	  /* Mechanical print quality
				   * -1 = fast, 0 = normal, 1 = presentation
				   * Fast mode reduces ink usage and uses
				   * single-pass operation for some media
				   * types. Presentation uses more ink and
				   * max number of passes, ie. slowest
				   * printing for highest quality */
	RenderType	(int)	  /* 0 = driver does dithering
				   * 1 = snap to primaries
				   * 2 = snap black -> white, others to black
				   * 3 = ordered dither
				   * 4 = error diffusion
				   * 5 = monochrome ordered dither
				   * 6 = monochrome error diffusion
				   * 7 = cluster ordered dither
				   * 8 = monochrome cluster ordered dither
				   * 9 = user-defined dither (not supported)
				   * 10 = monochrome user-defined dither ns. */

PAINTJET PROPERTIES:

	No additional properties


GAMMA CORRECTION:

 One consequence of using Floyd-Steinberg dithering rather than Ghostscript's
 default clustered ordered dither is that it is much more obvious that the
 ink dots are rather larger on the page than their nominal 1/180" or 1/300"
 size (clustering the dots tends to minimise this effect). Thus it is often
 the case that the printed result is rather too dark. A simple empirical
 correction for this may be achieved by preceding the actual postscript
 file to be printed by a short file which effectively sets the gamma for
 the device, eg.

 gs ... gamma.ps colorpic.ps -c quit

 where gamma.ps is

%!
{0.333 exp} dup dup currenttransfer setcolortransfer