📄 system.log
字号:
Xilinx Platform Studio (XPS)Xilinx EDK 7.1.2 Build EDK_H.12.5.1Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Copied file bitgen.ut from $XILINX_EDK/data/xflow directory to etc directoryCopied file bitgen_spartan3.ut from $XILINX_EDK/data directory to etc directoryCopied file fast_runtime.opt from $XILINX_EDK/data/xflow directory to etc directoryWARNING:MDT - Created an empty D:\mb-jpeg\data\system.ucf. If your design needs any constraints, please make changes to this UCF file.Project Opened.No changes to be saved in XMP fileXilinx Platform Studio (XPS)Xilinx EDK 7.1.2 Build EDK_H.12.5.1Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.At Local date and time: Wed Nov 01 18:28:08 2006Command xbash -q -c "cd /cygdrive/d/mb-jpeg/; /usr/bin/make -f system.make program; exit;" Started...*********************************************Creating software libraries...*********************************************libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/ system.msslibgenXilinx EDK 7.1.2 Build EDK_H.12.5.1Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.Command Line: libgen -mhs system.mhs -p xc2vp30ff896-7 -lp D:/XilinxXUP/lib/system.mss Output Directory (-od) : D:\mb-jpeg\Part (-p) : virtex2pSoftware Specification file : system.mssSourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/microblaze_v4_00_a/data/microblaze_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_v10_v1_00_a/data/lmb_v10_v2_1_0.tcl...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/lmb_bram_if_cntlr_v1_00_b/data/lmb_bram_if_cntlr_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_sysace_v1_00_c/data/opb_sysace_v2_1_0.tcl ...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/opb_ddr_v2_00_b/data/opb_ddr_v2_1_0.tcl...Overriding IP level properties ...microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:60 - tool overriding c_family value virtex2 to virtex2pmicroblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:61 - tool overriding c_instance value microblaze to microblaze_0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:90 - tcl overriding C_ADDR_TAG_BITS value 17 to 0microblaze (microblaze_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v4_00_a\data\microblaze_v2_1_0.mpd:97 - tcl overriding C_DCACHE_ADDR_TAG value 17 to 0opb_mdm (debug_module) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_mdm_v2_00_a\data\opb_mdm_v2_1_0.mpd:38- tool overriding c_family value virtex2 to virtex2pbram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd:39 - tool overriding c_family value virtex2 to virtex2popb_ddr (ddr_256mb_32mx64_rank1_row13_col10_cl2_5) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_ddr_v2_00_b\data\opb_ddr_v2_1_0.mpd:42- tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_0) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd:56 - tool overriding c_family value virtex2 to virtex2pdcm_module (dcm_1) -C:\EDK\hw\XilinxProcessorIPLib\pcores\dcm_module_v1_00_a\data\dcm_module_v2_1_0.mpd:56 - tool overriding c_family value virtex2 to virtex2pPerforming IP level DRCs on properties...Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...Address Map for Processor microblaze_0 (0x00000000-0x00001fff) dlmb_cntlr dlmb (0x00000000-0x00001fff) ilmb_cntlr ilmb (0x30000000-0x3fffffff) DDR_256MB_32MX64_rank1_row13_col10_cl2_5 mb_opb (0x40600000-0x4060ffff) RS232_Uart_1 mb_opb (0x41400000-0x4140ffff) debug_module mb_opb (0x41800000-0x4180ffff) SysACE_CompactFlash mb_opbCheck platform configuration ...opb_v20 (mb_opb) - D:\mb-jpeg\system.mhs:74 - 2 master(s) : 4 slave(s)lmb_v10 (ilmb) - D:\mb-jpeg\system.mhs:100 - 1 master(s) : 1 slave(s)lmb_v10 (dlmb) - D:\mb-jpeg\system.mhs:108 - 1 master(s) : 1 slave(s)Check port drivers...Check platform address map ...Overriding system level properties ...opb_v20 (mb_opb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\opb_v20_v1_10_c\data\opb_v20_v2_1_0.mpd:36- tool overriding c_num_masters value 4 to 2lmb_v10 (ilmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpd:36- tool overriding c_lmb_num_slaves value 4 to 1lmb_v10 (dlmb) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v10_v2_1_0.mpd:36- tool overriding c_lmb_num_slaves value 4 to 1lmb_bram_if_cntlr (dlmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd:42 - tool overriding c_mask value 0x00800000 to 0x10c00000lmb_bram_if_cntlr (ilmb_cntlr) -C:\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v1_00_b\data\lmb_bram_if_cntlr_v2_1_0.mpd:42 - tool overriding c_mask value 0x00800000 to 0x10c00000bram_block (lmb_bram) -C:\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd:35 - tool overriding c_memsize value 2048 to 8192Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...Sourcing tcl fileC:/EDK/hw/XilinxProcessorIPLib/pcores/ddr_v2_00_b/data/ddr_v2_1_0.tcl ...Performing System level DRCs on properties...WARNING:MDT - Peripheral sysclk_inv is not connected to any of the processors in the system. Check for the following reasons. 1. sysclk_inv is not connected to any of the buses connected to a processor. 2. sysclk_inv does not have adresses set correctly. 3. sysclk_inv's address is not within any of the bridge windows connected to a processor.WARNING:MDT - Peripheral clk90_inv is not connected to any of the processors in the system. Check for the following reasons. 1. clk90_inv is not connected to any of the buses connected to a processor. 2. clk90_inv does not have adresses set correctly. 3. clk90_inv's address is not within any of the bridge windows connected to a processor.WARNING:MDT - Peripheral ddr_clk90_inv is not connected to any of the processors in the system. Check for the following reasons. 1. ddr_clk90_inv is not connected to any of the buses connected to a processor. 2. ddr_clk90_inv does not have adresses set correctly. 3. ddr_clk90_inv's address is not within any of the bridge windows connected to a processor.WARNING:MDT - Peripheral dcm_0 is not connected to any of the processors in the system. Check for the following reasons. 1. dcm_0 is not connected to any of the buses connected to a processor. 2. dcm_0 does not have adresses set correctly. 3. dcm_0's address is not within any of the bridge windows connected to a processor.WARNING:MDT - Peripheral dcm_1 is not connected to any of the processors in the system. Check for the following reasons. 1. dcm_1 is not connected to any of the buses connected to a processor. 2. dcm_1 does not have adresses set correctly. 3. dcm_1's address is not within any of the bridge windows connected to a processor.INFO:MDT - List of peripherals addressable from processor instance microblaze_0 : - dlmb_cntlr - ilmb_cntlr - debug_module - RS232_Uart_1 - SysACE_CompactFlash - DDR_256MB_32MX64_rank1_row13_col10_cl2_5Building Directory Structure for microblaze_0Generating platform libraries and device drivers ...Running CopyFiles ...Copying files for os standalone_v1_00_a fromC:\EDK\sw\lib\bsp\standalone_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\standalone_v1_00_a\ ...Copying files for driver uartlite_v1_00_b fromC:\EDK\sw\XilinxProcessorIPLib\drivers\uartlite_v1_00_b\src\ toD:\mb-jpeg\microblaze_0\libsrc\uartlite_v1_00_b\ ...Copying files for driver sysace_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\sysace_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\sysace_v1_00_a\ ...Copying files for driver cpu_v1_00_a fromC:\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_00_a\src\ toD:\mb-jpeg\microblaze_0\libsrc\cpu_v1_00_a\ ...Running DRCs for OSes, Drivers and Libraries ... Running generate for OS'es, Drivers and Libraries ... Copying Library Files ...Running post_generate for OS'es, Drivers and Libraries ... Running make for Drivers and Libraries ... Configuring make for target include using:make -s include "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g" Configuring make for target libs using:make -s libs "COMPILER=mb-gcc" "ARCHIVER=mb-ar""COMPILER_FLAGS=-mno-xl-soft-mul -O2 -c" "EXTRA_COMPILER_FLAGS=-g" Compiling commoCompiling microblaze_disable_dcache.Compiling microblaze_disable_exceptions.Compiling microblaze_disable_icache.Compiling microblaze_disable_interrupts.Compiling microblaze_enable_dcache.Compiling microblaze_enable_exceptions.Compiling microblaze_enable_icache.Compiling microblaze_enable_interrupts.Compiling microblaze_init_dcache_range.Compiling microblaze_init_icache_range.Compiling microblaze_update_dcache.Compiling microblaze_update_icache.Compiling inbyte.Compiling microblaze_exception_handler.Compiling microblaze_exceptions_g.Compiling microblaze_interrupt_handler.Compiling microblaze_interrupts_g.Compiling outbyte.Compiling hw_exception_handler.Compiling uartlitCompiling sysacCompiling cpLibraries generated in D:\mb-jpeg\microblaze_0\lib\ directoryRunning execs_generate for OS'es, Drivers and Libraries ... LibGen Done. mb-gcc -O2 TestApp_Memory/src/TestApp_Memory.c -o TestApp_Memory/executable.elf \ -mno-xl-soft-mul -Wl,-T -Wl,TestApp_Memory/src/TestApp_Memory_LinkScr -g -I./microblaze_0/include/ -L./microblaze_0/lib/ \
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -