deskwinapi.bas

单片机开放式数控系统 使用vb编写

 rs274ngc_errors(36) = "Bug unknown motion code"
 rs274ngc_errors(37) = "Bug unknown operation"
 rs274ngc_errors(38) = "Cannot change axis offsets with cutter radius comp"
 rs274ngc_errors(39) = "Cannot change units with cutter radius comp"
  rs274ngc_errors(40) = "Cannot create backup file"
 rs274ngc_errors(41) = "Cannot do g1 with zero feed rate"
 rs274ngc_errors(42) = "Cannot do zero repeats of cycle"
 rs274ngc_errors(43) = "Cannot make arc with zero feed rate"
  rs274ngc_errors(44) = "Cannot move rotary axes during probing"
 rs274ngc_errors(45) = "Cannot open backup file"
 rs274ngc_errors(46) = "Cannot open variable file"
 rs274ngc_errors(47) = "Cannot probe in inverse time feed mode "
 rs274ngc_errors(48) = "Cannot probe with cutter radius comp on"
 rs274ngc_errors(49) = "Cannot probe with zero feed rate"
 rs274ngc_errors(50) = "Cannot put a b in canned cycle"
 rs274ngc_errors(51) = "Cannot put a c in canned cycle "
 rs274ngc_errors(52) = "Cannot put an a in canned cycle"
  rs274ngc_errors(53) = "Cannot turn cutter radius comp on out of xy plane"
  rs274ngc_errors(54) = "Cannot turn cutter radius comp on when on"
 rs274ngc_errors(55) = "Cannot use a word "
 rs274ngc_errors(56) = " Cannot use axis values with g80"
  rs274ngc_errors(57) = "Cannot use axis values without a g code that uses them"
  rs274ngc_errors(58) = "Cannot use b word"
  rs274ngc_errors(59) = "Cannot use c word"
  rs274ngc_errors(60) = "Cannot use g28 or g30 with cutter radius comp"
  rs274ngc_errors(61) = "Cannot use g53 incremental"
  rs274ngc_errors(62) = "Cannot use g53 with cutter radius comp"
  rs274ngc_errors(63) = "Cannot use two g codes that both use axis values"
  rs274ngc_errors(64) = "Cannot use xz plane with cutter radius comp"
  rs274ngc_errors(65) = "Cannot use yz plane with cutter radius comp"
  rs274ngc_errors(66) = "Command too long "
  rs274ngc_errors(67) = " Concave corner with cutter radius comp"
  rs274ngc_errors(68) = "Coordinate system index parameter 5220 out of range"
  rs274ngc_errors(69) = "Current point same as end point of arc"
  rs274ngc_errors(70) = "Cutter gouging with cutter radius comp"
  rs274ngc_errors(71) = "D word with no g41 or g42"
  rs274ngc_errors(72) = "Dwell time missing with g4"
 rs274ngc_errors(73) = "Dwell time p word missing with g82"
 rs274ngc_errors(74) = "Dwell time p word missing with g86 "
 rs274ngc_errors(75) = " Dwell time p word missing with g88"
 rs274ngc_errors(76) = "Dwell time p word missing with g89"
 rs274ngc_errors(77) = "Equal sign missing in parameter setting"
  rs274ngc_errors(78) = "F word missing with inverse time arc move"
  rs274ngc_errors(79) = "F word missing with inverse time g1 move"
  rs274ngc_errors(80) = "File ended with no percent sign"
 rs274ngc_errors(81) = "File ended with no percent sign or program end"
  rs274ngc_errors(82) = "File name too long "
 rs274ngc_errors(83) = "File not open"
 rs274ngc_errors(84) = "G code out of range"
  rs274ngc_errors(85) = "H word with no g43"
  rs274ngc_errors(86) = "I word given for arc in yz plane"
  rs274ngc_errors(87) = "I word missing with g87"
  rs274ngc_errors(88) = "I word with no g2 or g3 or g87 to use it"
  rs274ngc_errors(89) = "J word given for arc in xz plane"
  rs274ngc_errors(90) = "J word missing with g87"
  rs274ngc_errors(91) = "J word with no g2 or g3 or g87 to use it "
  rs274ngc_errors(92) = "K word given for arc in xy plane"
  rs274ngc_errors(93) = "K word missing with g87"
 rs274ngc_errors(94) = "K word with no g2 or g3 or g87 to use it"
  rs274ngc_errors(95) = "L word with no canned cycle or g10"
  rs274ngc_errors(96) = "Left bracket missing after slash with atan"
  rs274ngc_errors(97) = "Left bracket missing after unary operation name"
  rs274ngc_errors(98) = "Line number greater than 99999"
  rs274ngc_errors(99) = "Line with g10 does not have l2"
  rs274ngc_errors(100) = "M code greater than 99"
   rs274ngc_errors(101) = "Mixed radius ijk format for arc"
   rs274ngc_errors(102) = "Multiple a words on one line"
  rs274ngc_errors(103) = "Multiple b words on one line"
  rs274ngc_errors(104) = "Multiple c words on one line"
  rs274ngc_errors(105) = "Multiple d words on one line"
  rs274ngc_errors(106) = "Multiple f words on one line "
  rs274ngc_errors(107) = "Multiple h words on one line"
 rs274ngc_errors(108) = "Multiple i words on one line"
  rs274ngc_errors(109) = "Multiple j words on one line"
  rs274ngc_errors(110) = "Multiple k words on one line"
  rs274ngc_errors(111) = "Multiple l words on one line "
  rs274ngc_errors(112) = "Multiple p words on one line"
 rs274ngc_errors(113) = "Multiple q words on one line"
 rs274ngc_errors(114) = "Multiple r words on one line"
 rs274ngc_errors(115) = "Multiple s words on one line"
  rs274ngc_errors(116) = "Multiple t words on one line "
 rs274ngc_errors(117) = "Multiple x words on one line"
 rs274ngc_errors(118) = "Multiple y words on one line"
 rs274ngc_errors(119) = "Multiple z words on one line"
 rs274ngc_errors(120) = "Must use g0 or g1 with g53"
 rs274ngc_errors(121) = "Negative argument to sqrt"
 rs274ngc_errors(122) = "Negative d word tool radius index used"
 rs274ngc_errors(123) = "Negative f word used"
 rs274ngc_errors(124) = "Negative g code used"
  rs274ngc_errors(125) = "Negative h word tool length offset index used"
  rs274ngc_errors(126) = "Negative l word used "
  rs274ngc_errors(127) = "Negative m code used"
  rs274ngc_errors(128) = "Negative or zero q value used"
  rs274ngc_errors(129) = "Negative p word used"
  rs274ngc_errors(130) = "Negative spindle speed used"
  rs274ngc_errors(131) = "Negative tool id used"
 rs274ngc_errors(132) = "Nested comment found"
 rs274ngc_errors(133) = "No characters found in reading real value"
 rs274ngc_errors(134) = "No digits found where real number should be"
 rs274ngc_errors(135) = "Non integer value for integer"
 rs274ngc_errors(136) = "Null missing after newline"
 rs274ngc_errors(137) = "Offset index missing"
 rs274ngc_errors(138) = "P value not an integer with g10 l2"
 rs274ngc_errors(139) = "P value out of range with g10 l2"
  rs274ngc_errors(140) = "P word with no g4 g10 g82 g86 g88 g89"
  rs274ngc_errors(141) = "Parameter file out of order"
  rs274ngc_errors(142) = "Parameter number out of range"
  rs274ngc_errors(143) = "Q word missing with g83"
 rs274ngc_errors(144) = "Q word with no g83"
  rs274ngc_errors(145) = "Queue is not empty after probing"
  rs274ngc_errors(146) = "R clearance plane unspecified in cycle"
 rs274ngc_errors(147) = "R i j k words all missing for arc"
 rs274ngc_errors(148) = "R less than x in cycle in yz plane"
 rs274ngc_errors(149) = "R less than y in cycle in xz plane"
 rs274ngc_errors(150) = "R less than z in cycle in xy plane"
  rs274ngc_errors(151) = "R word with no g code that uses it"
  rs274ngc_errors(152) = "Radius to end of arc differs from radius to start"
  rs274ngc_errors(153) = "Radius too small to reach end point"
  rs274ngc_errors(154) = "Required parameter missing"
  rs274ngc_errors(155) = "Selected tool slot number too large"
  rs274ngc_errors(156) = "Slash missing after first atan argument"
  rs274ngc_errors(157) = "Spindle not turning clockwise in g84"
  rs274ngc_errors(158) = "Spindle not turning in g86"
  rs274ngc_errors(159) = "Spindle not turning in g87"
   rs274ngc_errors(160) = "Spindle not turning in g88"
   rs274ngc_errors(161) = "Sscanf failed"
  rs274ngc_errors(162) = "Start point too close to probe point"
  rs274ngc_errors(163) = "Too many m codes on line"
  rs274ngc_errors(164) = "Tool length offset index too big"
  rs274ngc_errors(165) = "Tool max too large"
  rs274ngc_errors(166) = "Tool radius index too big"
  rs274ngc_errors(167) = "Tool radius not less than arc radius with comp"
  rs274ngc_errors(168) = "Two g codes used from same modal group"
  rs274ngc_errors(169) = "Two m codes used from same modal group"
  rs274ngc_errors(170) = "Unable to open file"
  rs274ngc_errors(171) = "Unclosed comment found"
   rs274ngc_errors(172) = "Unclosed expression"
  rs274ngc_errors(173) = "Unknown g code used"
   rs274ngc_errors(174) = "Unknown m code used "
  rs274ngc_errors(175) = "Unknown operation"
  rs274ngc_errors(176) = "Unknown operation name starting with a"
   rs274ngc_errors(177) = "Unknown operation name starting with m"
   rs274ngc_errors(178) = "Unknown operation name starting with o"
  rs274ngc_errors(179) = "Unknown operation name starting with x"
  rs274ngc_errors(180) = "Unknown word starting with a"
  rs274ngc_errors(181) = "Unknown word starting with c"
  rs274ngc_errors(182) = "Unknown word starting with e"
  rs274ngc_errors(183) = "Unknown word starting with f "
  rs274ngc_errors(184) = "Unknown word starting with l"
  rs274ngc_errors(185) = "Unknown word starting with r"
  rs274ngc_errors(186) = "Unknown word starting with s"
  rs274ngc_errors(187) = "Unknown word starting with t"
   rs274ngc_errors(188) = "Unknown word where unary operation could be"
   rs274ngc_errors(189) = "X and y words missing for arc in xy plane"
   rs274ngc_errors(190) = "X and z words missing for arc in xz plane"
    rs274ngc_errors(191) = "X value unspecified in yz plane canned cycle"
   rs274ngc_errors(192) = "X y and z words all missing with g38 2"
   rs274ngc_errors(193) = "Y and z words missing for arc in yz plane"
   rs274ngc_errors(194) = "Y value unspecified in xz plane canned cycle"
  rs274ngc_errors(195) = "Z value unspecified in xy plane canned cycle"
   rs274ngc_errors(196) = "Zero or negative argument to ln"
   rs274ngc_errors(197) = "Zero radius arc"
   rs274ngc_errors(198) = "The End"


End Sub