dsp28_adc.c

实验室做的SVC无功补偿项目

//
//      TMDX ALPHA RELEASE
//      Intended for product evaluation purposes
//
//###########################################################################
//
// FILE:	DSP28_Adc.c
//
// TITLE:	DSP28 ADC Initialization & Support Functions.
//
//###########################################################################
//
//  Ver | dd mmm yyyy | Who  | Description of changes
// =====|=============|======|===============================================
//  0.55| 06 May 2002 | L.H. | EzDSP Alpha Release
//  0.56| 20 May 2002 | L.H. | No change
//  0.57| 27 May 2002 | L.H. | No change
//###########################################################################

#include "DSP28_Device.h"

//---------------------------------------------------------------------------
// InitAdc: 
//---------------------------------------------------------------------------
// This function initializes ADC to a known state.
//

void delay(unsigned int j)
{
	unsigned int i;
	for(i=0;i<j;i++)
	{
		NOP;
	}
}

void InitAdc(void)
{
	
		
	AdcRegs.ADCTRL1.bit.RESET=1;
	NOP;
    delay(12);
	NOP;
	AdcRegs.ADCTRL3.bit.ADCBGRFDN=3;
	delay(5000);
	AdcRegs.ADCTRL3.bit.ADCPWDN=1;
	delay(50);
	AdcRegs.ADCTRL1.bit.RESET=0;
	AdcRegs.ADCTRL1.bit.SUSMOD=3;
	AdcRegs.ADCTRL1.bit.ACQ_PS=12;//采样窗的宽度为13
	AdcRegs.ADCTRL1.bit.CPS=1;
	AdcRegs.ADCTRL1.bit.CONT_RUN=1;
	AdcRegs.ADCTRL1.bit.SEQ_CASC=1;
	
	AdcRegs.ADCTRL3.bit.ADCCLKPS=15;
	AdcRegs.ADCTRL3.bit.SMODE_SEL=1;//同时采样
	AdcRegs.MAX_CONV.bit.MAX_CONV=2;
	
	AdcRegs.CHSELSEQ1.bit.CONV00=7;//采样a相电压电流
		
	AdcRegs.ADC_ST_FLAG.bit.INT_SEQ1_CLR=1;
	AdcRegs.ADC_ST_FLAG.bit.INT_SEQ2_CLR=1;	
	
	AdcRegs.ADCTRL2.bit.EVB_SOC_SEQ=0;
	AdcRegs.ADCTRL2.bit.RST_SEQ1=0;
	AdcRegs.ADCTRL2.bit.INT_ENA_SEQ1=1;
	AdcRegs.ADCTRL2.bit.INT_MOD_SEQ1=0;
	AdcRegs.ADCTRL2.bit.EVA_SOC_SEQ1=0;
	AdcRegs.ADCTRL2.bit.EXT_SOC_SEQ1=0;
	AdcRegs.ADCTRL2.bit.RST_SEQ2=0;
	AdcRegs.ADCTRL2.bit.SOC_SEQ2=0;
	AdcRegs.ADCTRL2.bit.INT_ENA_SEQ2=0;
	AdcRegs.ADCTRL2.bit.INT_MOD_SEQ2=0;
	AdcRegs.ADCTRL2.bit.EVB_SOC_SEQ2=0;
	AdcRegs.ADCTRL2.bit.SOC_SEQ1=1;
	
	
}	





//===========================================================================
// No more.
//===========================================================================