dsp281x_piectrl.c

基于双向DC-DC变换器

#include "DSP281x_Device.h"     // DSP281x Headerfile Include File
#include "DSP281x_Examples.h"   // DSP281x Examples Include File

//---------------------------------------------------------------------------
// InitPieCtrl: 
//---------------------------------------------------------------------------
// This function initializes the PIE control registers to a known state.
//
void InitPieCtrl(void)
{
    // Disable Interrupts at the CPU level:
    DINT;
    // Disable the PIE
    PieCtrlRegs.PIECRTL.bit.ENPIE = 0;
	// Disable all interrupt
	PieCtrlRegs.PIEIER1.all = 0;
	PieCtrlRegs.PIEIER2.all = 0;
	PieCtrlRegs.PIEIER3.all = 0;	
	PieCtrlRegs.PIEIER4.all = 0;
	PieCtrlRegs.PIEIER5.all = 0;
	PieCtrlRegs.PIEIER6.all = 0;
	PieCtrlRegs.PIEIER7.all = 0;
	PieCtrlRegs.PIEIER8.all = 0;
	PieCtrlRegs.PIEIER9.all = 0;
	PieCtrlRegs.PIEIER10.all = 0;
	PieCtrlRegs.PIEIER11.all = 0;
	PieCtrlRegs.PIEIER12.all = 0;
	// no active
	PieCtrlRegs.PIEIFR1.all = 0;
	PieCtrlRegs.PIEIFR2.all = 0;
	PieCtrlRegs.PIEIFR3.all = 0;	
	PieCtrlRegs.PIEIFR4.all = 0;
	PieCtrlRegs.PIEIFR5.all = 0;
	PieCtrlRegs.PIEIFR6.all = 0;
	PieCtrlRegs.PIEIFR7.all = 0;
	PieCtrlRegs.PIEIFR8.all = 0;
	PieCtrlRegs.PIEIFR9.all = 0;
	PieCtrlRegs.PIEIFR10.all = 0;
	PieCtrlRegs.PIEIFR11.all = 0;
	PieCtrlRegs.PIEIFR12.all = 0;
}	

//---------------------------------------------------------------------------
// EnableInterrupts: 
//---------------------------------------------------------------------------
// This function enables the PIE module and CPU interrupts
void EnableInterrupts()
{
    // Enable the PIE
    PieCtrlRegs.PIECRTL.bit.ENPIE = 1;
	// Enables PIE to drive a pulse into the CPU 
	PieCtrlRegs.PIEACK.all = 0xFFFF;  
	// Enable Interrupts at the CPU level 
    EINT;

}