hw_usb.h

KEIL驱动 各方面各 你的看法女士的烦恼 方看到你

#define USB_RXFUNCADDR1_ADDR_S  0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR1
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR1_MULTTRAN 0x00000080  // Multiple Translators.
#define USB_RXHUBADDR1_ADDR_M   0x0000007F  // Hub Address.
#define USB_RXHUBADDR1_ADDR_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT1
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT1_PORT_M   0x0000007F  // Hub Port.
#define USB_RXHUBPORT1_PORT_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR2
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR2_ADDR_M  0x0000007F  // Device Address.
#define USB_TXFUNCADDR2_ADDR_S  0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR2
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR2_MULTTRAN 0x00000080  // Multiple Translators.
#define USB_TXHUBADDR2_ADDR_M   0x0000007F  // Hub Address.
#define USB_TXHUBADDR2_ADDR_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT2
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT2_PORT_M   0x0000007F  // Hub Port.
#define USB_TXHUBPORT2_PORT_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFUNCADDR2
// register.
//
//*****************************************************************************
#define USB_RXFUNCADDR2_ADDR_M  0x0000007F  // Device Address.
#define USB_RXFUNCADDR2_ADDR_S  0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR2
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR2_MULTTRAN 0x00000080  // Multiple Translators.
#define USB_RXHUBADDR2_ADDR_M   0x0000007F  // Hub Address.
#define USB_RXHUBADDR2_ADDR_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT2
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT2_PORT_M   0x0000007F  // Hub Port.
#define USB_RXHUBPORT2_PORT_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR3
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR3_ADDR_M  0x0000007F  // Device Address.
#define USB_TXFUNCADDR3_ADDR_S  0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR3
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR3_MULTTRAN 0x00000080  // Multiple Translators.
#define USB_TXHUBADDR3_ADDR_M   0x0000007F  // Hub Address.
#define USB_TXHUBADDR3_ADDR_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT3
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT3_PORT_M   0x0000007F  // Hub Port.
#define USB_TXHUBPORT3_PORT_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFUNCADDR3
// register.
//
//*****************************************************************************
#define USB_RXFUNCADDR3_ADDR_M  0x0000007F  // Device Address.
#define USB_RXFUNCADDR3_ADDR_S  0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR3
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR3_MULTTRAN 0x00000080  // Multiple Translators.
#define USB_RXHUBADDR3_ADDR_M   0x0000007F  // Hub Address.
#define USB_RXHUBADDR3_ADDR_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT3
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT3_PORT_M   0x0000007F  // Hub Port.
#define USB_RXHUBPORT3_PORT_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_CSRL0 register.
//
//*****************************************************************************
#define USB_CSRL0_NAKTO         0x00000080  // NAK Timeout.
#define USB_CSRL0_SETENDC       0x00000080  // Setup End Clear.
#define USB_CSRL0_STATUS        0x00000040  // Status Packet.
#define USB_CSRL0_RXRDYC        0x00000040  // RXRDY Clear.
#define USB_CSRL0_REQPKT        0x00000020  // Request Packet.
#define USB_CSRL0_STALL         0x00000020  // Send Stall.
#define USB_CSRL0_SETEND        0x00000010  // Setup End.
#define USB_CSRL0_ERROR         0x00000010  // Error.
#define USB_CSRL0_DATAEND       0x00000008  // Data End.
#define USB_CSRL0_SETUP         0x00000008  // Setup Packet.
#define USB_CSRL0_STALLED       0x00000004  // Endpoint Stalled.
#define USB_CSRL0_TXRDY         0x00000002  // Transmit Packet Ready.
#define USB_CSRL0_RXRDY         0x00000001  // Receive Packet Ready.

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_CSRH0 register.
//
//*****************************************************************************
#define USB_CSRH0_DTWE          0x00000004  // Data Toggle Write Enable.
#define USB_CSRH0_DT            0x00000002  // Data Toggle.
#define USB_CSRH0_FLUSH         0x00000001  // Flush FIFO.

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_COUNT0 register.
//
//*****************************************************************************
#define USB_COUNT0_COUNT_M      0x0000007F  // Count.
#define USB_COUNT0_COUNT_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TYPE0 register.
//
//*****************************************************************************
#define USB_TYPE0_SPEED_M       0x000000C0  // Operating Speed.
#define USB_TYPE0_SPEED_FULL    0x00000080  // Full
#define USB_TYPE0_SPEED_LOW     0x000000C0  // Low

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_NAKLMT register.
//
//*****************************************************************************
#define USB_NAKLMT_NAKLMT_M     0x0000001F  // EP0 NAK Limit.
#define USB_NAKLMT_NAKLMT_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXMAXP1 register.
//
//*****************************************************************************
#define USB_TXMAXP1_MULT_M      0x0000F800  // Multiplier.
#define USB_TXMAXP1_MAXLOAD_M   0x000007FF  // Maximum Payload.
#define USB_TXMAXP1_MULT_S      11
#define USB_TXMAXP1_MAXLOAD_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRL1 register.
//
//*****************************************************************************
#define USB_TXCSRL1_NAKTO       0x00000080  // NAK Timeout
#define USB_TXCSRL1_INCTX       0x00000080  // Incomplete Transmit.
#define USB_TXCSRL1_CLRDT       0x00000040  // Clear Data Toggle.
#define USB_TXCSRL1_STALLED     0x00000020  // Endpoint Stalled.
#define USB_TXCSRL1_STALL       0x00000010  // Send Stall.
#define USB_TXCSRL1_SETUP       0x00000010  // Setup Packet.
#define USB_TXCSRL1_FLUSH       0x00000008  // Flush FIFO.
#define USB_TXCSRL1_ERROR       0x00000004  // Error.
#define USB_TXCSRL1_UNDRN       0x00000004  // Underrun.
#define USB_TXCSRL1_FIFONE      0x00000002  // FIFO Not Empty.
#define USB_TXCSRL1_TXRDY       0x00000001  // Transmit Packet Ready.

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRH1 register.
//
//*****************************************************************************
#define USB_TXCSRH1_AUTOSET     0x00000080  // Auto Set.
#define USB_TXCSRH1_ISO         0x00000040  // ISO.
#define USB_TXCSRH1_MODE        0x00000020  // Mode.
#define USB_TXCSRH1_DMAEN       0x00000010  // DMA Request Enable.
#define USB_TXCSRH1_FDT         0x00000008  // Force Data Toggle.
#define USB_TXCSRH1_DMAMOD      0x00000004  // DMA Request Mode.
#define USB_TXCSRH1_DTWE        0x00000002  // Data Toggle Write Enable.
#define USB_TXCSRH1_DT          0x00000001  // Data Toggle.

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXMAXP1 register.
//
//*****************************************************************************
#define USB_RXMAXP1_MULT_M      0x0000F800  // Multiplier.
#define USB_RXMAXP1_MAXLOAD_M   0x000007FF  // Maximum Payload.
#define USB_RXMAXP1_MULT_S      11
#define USB_RXMAXP1_MAXLOAD_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRL1 register.
//
//*****************************************************************************
#define USB_RXCSRL1_CLRDT       0x00000080  // Clear Data Toggle.
#define USB_RXCSRL1_STALLED     0x00000040  // Endpoint Stalled.
#define USB_RXCSRL1_STALL       0x00000020  // Send Stall.
#define USB_RXCSRL1_REQPKT      0x00000020  // Request Packet.
#define USB_RXCSRL1_FLUSH       0x00000010  // Flush FIFO.
#define USB_RXCSRL1_DATAERR     0x00000008  // Data Error.
#define USB_RXCSRL1_NAKTO       0x00000008  // NAK Timeout.
#define USB_RXCSRL1_OVER        0x00000004  // Overrun.
#define USB_RXCSRL1_ERROR       0x00000004  // Error.
#define USB_RXCSRL1_FULL        0x00000002  // FIFO Full.
#define USB_RXCSRL1_RXRDY       0x00000001  // Receive Packet Ready.

//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRH1 register.
//
//*****************************************************************************
#define USB_RXCSRH1_AUTOCL      0x00000080  // Auto Clear.