add.fit

关于CPLD程序

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 12/06/2007 15:13:47      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "add"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "clk1"                         : INPUT_PIN  = 2      ;
    "add0"                         : OUTPUT_PIN = 72     ;
    "add1"                         : OUTPUT_PIN = 71     ;
    "add2"                         : OUTPUT_PIN = 69     ;
    "add3"                         : OUTPUT_PIN = 73     ;
    "add4"                         : OUTPUT_PIN = 19     ;
    "add5"                         : OUTPUT_PIN = 18     ;
    "add6"                         : OUTPUT_PIN = 17     ;
    "add7"                         : OUTPUT_PIN = 16     ;
    "|LPM_ADD_SUB:61|addcore:adder|:125" : LOCATION   = LC3_A18;
    "|LPM_ADD_SUB:61|addcore:adder|:129" : LOCATION   = LC6_A18;
    "|LPM_ADD_SUB:61|addcore:adder|:133" : LOCATION   = LC4_A6 ;
    "|LPM_ADD_SUB:61|addcore:adder|:137" : LOCATION   = LC7_A6 ;
    "|LPM_ADD_SUB:61|addcore:adder|:141" : LOCATION   = LC1_A6 ;
    "|LPM_ADD_SUB:102|addcore:adder|:125" : LOCATION   = LC5_A18;
    "|LPM_ADD_SUB:102|addcore:adder|:129" : LOCATION   = LC8_A18;
    "|LPM_ADD_SUB:102|addcore:adder|:133" : LOCATION   = LC3_A6 ;
    "|LPM_ADD_SUB:102|addcore:adder|:137" : LOCATION   = LC8_A6 ;
    "|LPM_ADD_SUB:102|addcore:adder|:141" : LOCATION   = LC2_A5 ;
    ":11"                          : LOCATION   = LC1_A5 ;  -- tmp7
    ":12"                          : LOCATION   = LC2_A6 ;  -- tmp6
    ":13"                          : LOCATION   = LC5_A6 ;  -- tmp5
    ":14"                          : LOCATION   = LC6_A6 ;  -- tmp4
    ":15"                          : LOCATION   = LC1_A18;  -- tmp3
    ":16"                          : LOCATION   = LC7_A18;  -- tmp2
    ":17"                          : LOCATION   = LC4_A18;  -- tmp1
    ":18"                          : LOCATION   = LC2_A18;  -- tmp0

END;

INTERNAL_INFO "add"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC1_A5,->LC2_A6,->LC5_A6,->LC6_A6,->LC1_A18,->LC7_A18,->LC4_A18,->LC2_A18|";
    OD1P2   : LORAX = "1:FB1|2:FH1R0|3:PA20R0C4->LC1_A5|,3:PA20R0C5->LC2_A6,->LC5_A6,->LC6_A6|,3:PA20R0C17->LC1_A18,->LC7_A18,->LC4_A18,->LC2_A18|||";
    LC6_A18 : LORAX = "1:MSW6R0C16,G76R0,PA13R0C5->LC4_A6,->LC7_A6,->LC1_A6,->LC6_A6|";
    LC1_A6  : LORAX = "1:MSW0R0C5,HHL20R0,PA16R0C4->LC1_A5|";
    LC8_A18 : LORAX = "1:MSW7R0C17,G88R0|2:PA10R0C4->LC2_A5|,2:PA10R0C5->LC3_A6,->LC8_A6,->LC6_A6||";
    LC1_A5  : LORAX = "1:MSW0R0C4,HHL18R0->OH8R0P16|";
    LC2_A6  : LORAX = "1:MSW2R0C4,G13R0->OH10R0P17|2:PA0R0C4->LC2_A5||";
    LC5_A6  : LORAX = "1:MSW4R0C5,HHL30R0->OH12R0P18|2:PA5R0C4->LC2_A5||";
    LC6_A6  : LORAX = "1:MSW6R0C4,HHL31R0->OH14R0P19|2:PA4R0C4->LC2_A5||";
    LC1_A18 : LORAX = "1:MSW0R0C17,G43R0->OH0R0P73|";
    LC7_A18 : LORAX = "1:MSW7R0C16,HHR25R0->OH7R0P69|";
    LC4_A18 : LORAX = "1:MSW3R0C17,HHR10R0->OH3R0P71|";
    LC2_A18 : LORAX = "1:MSW2R0C16,HHR0R0->OH2R0P72|";
	LC3_A18 : LORAX2 = "X, X, LC7_A18, LC4_A18";
	LC6_A18 : LORAX2 = "X, LC1_A18, LC7_A18, LC4_A18";
	LC4_A6  : LORAX2 = "X, X, LC6_A6, LC6_A18";
	LC7_A6  : LORAX2 = "X, LC5_A6, LC6_A6, LC6_A18";
	LC1_A6  : LORAX2 = "LC2_A6, LC5_A6, LC6_A6, LC6_A18";
	LC5_A18 : LORAX2 = "X, LC2_A18, LC7_A18, LC4_A18";
	LC8_A18 : LORAX2 = "LC2_A18, LC1_A18, LC7_A18, LC4_A18";
	LC3_A6  : LORAX2 = "X, X, LC6_A6, LC8_A18";
	LC8_A6  : LORAX2 = "X, LC5_A6, LC6_A6, LC8_A18";
	LC2_A5  : LORAX2 = "LC2_A6, LC5_A6, LC6_A6, LC8_A18";
	LC1_A5  : LORAX2 = "OD1P2, LC1_A5, LC2_A5, LC1_A6";
	LC2_A6  : LORAX2 = "OD1P2, LC2_A6, LC8_A6, LC7_A6";
	LC5_A6  : LORAX2 = "OD1P2, LC5_A6, LC4_A6, LC3_A6";
	LC6_A6  : LORAX2 = "OD1P2, LC6_A6, LC6_A18, LC8_A18";
	LC1_A18 : LORAX2 = "OD1P2, LC5_A18, LC3_A18, LC1_A18";
	LC7_A18 : LORAX2 = "OD1P2, LC2_A18, LC7_A18, LC4_A18";
	LC4_A18 : LORAX2 = "X, OD1P2, LC2_A18, LC4_A18";
	LC2_A18 : LORAX2 = "X, X, OD1P2, LC2_A18";
END;