test.map.rpt

tranmiss data from kit to computer via com.

; STATE.idle  ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0           ; 0          ;
; STATE.start ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 1           ; 1          ;
; STATE.bit0  ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 1          ; 0           ; 1          ;
; STATE.bit1  ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 1          ; 0          ; 0           ; 1          ;
; STATE.bit2  ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 1          ; 0          ; 0          ; 0           ; 1          ;
; STATE.bit3  ; 0          ; 0          ; 0          ; 0          ; 0          ; 1          ; 0          ; 0          ; 0          ; 0           ; 1          ;
; STATE.bit4  ; 0          ; 0          ; 0          ; 0          ; 1          ; 0          ; 0          ; 0          ; 0          ; 0           ; 1          ;
; STATE.bit5  ; 0          ; 0          ; 0          ; 1          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0           ; 1          ;
; STATE.bit6  ; 0          ; 0          ; 1          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0           ; 1          ;
; STATE.bit7  ; 0          ; 1          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0           ; 1          ;
; STATE.stop  ; 1          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0          ; 0           ; 1          ;
+-------------+------------+------------+------------+------------+------------+------------+------------+------------+------------+-------------+------------+


+--------------------------------------------------------------------------------+
; Registers Removed During Synthesis                                             ;
+---------------------------------------+----------------------------------------+
; Register name                         ; Reason for Removal                     ;
+---------------------------------------+----------------------------------------+
; UART_TX:TXD_BLOCK|BAUD_DIVIDER[0..6]  ; Stuck at GND due to stuck port data_in ;
; Total Number of Removed Registers = 7 ;                                        ;
+---------------------------------------+----------------------------------------+


+------------------------------------------------------+
; General Register Statistics                          ;
+----------------------------------------------+-------+
; Statistic                                    ; Value ;
+----------------------------------------------+-------+
; Total registers                              ; 35    ;
; Number of registers using Synchronous Clear  ; 12    ;
; Number of registers using Synchronous Load   ; 0     ;
; Number of registers using Asynchronous Clear ; 0     ;
; Number of registers using Asynchronous Load  ; 0     ;
; Number of registers using Clock Enable       ; 21    ;
; Number of registers using Preset             ; 0     ;
+----------------------------------------------+-------+


+----------------------------------------------------------------+
; Parameter Settings for User Entity Instance: UART_TX:TXD_BLOCK ;
+----------------+----------+------------------------------------+
; Parameter Name ; Value    ; Type                               ;
+----------------+----------+------------------------------------+
; sync_clock     ; 50000000 ; Signed Integer                     ;
; baud_rate      ; 115200   ; Signed Integer                     ;
+----------------+----------+------------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".


+-------------------------------+
; Analysis & Synthesis Messages ;
+-------------------------------+
Info: *******************************************************************
Info: Running Quartus II Analysis & Synthesis
    Info: Version 8.0 Build 215 05/29/2008 SJ Full Version
    Info: Processing started: Tue Oct 21 15:46:59 2008
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off TEST -c TEST
Info: Found 2 design units, including 1 entities, in source file TEST.vhd
    Info: Found design unit 1: TEST-STRUCT
    Info: Found entity 1: TEST
Info: Found 2 design units, including 1 entities, in source file UART_TX.vhd
    Info: Found design unit 1: UART_TX-BEHAV
    Info: Found entity 1: UART_TX
Info: Elaborating entity "TEST" for the top level hierarchy
Warning (10034): Output port "LEDG[7]" at TEST.vhd(13) has no driver
Warning (10034): Output port "LEDG[6]" at TEST.vhd(13) has no driver
Warning (10034): Output port "LEDG[5]" at TEST.vhd(13) has no driver
Warning (10034): Output port "LEDG[4]" at TEST.vhd(13) has no driver
Warning (10034): Output port "LEDG[3]" at TEST.vhd(13) has no driver
Warning (10034): Output port "LEDG[2]" at TEST.vhd(13) has no driver
Warning (10034): Output port "LEDG[1]" at TEST.vhd(13) has no driver
Warning (10034): Output port "LEDG[0]" at TEST.vhd(13) has no driver
Warning (10034): Output port "HEX0[0]" at TEST.vhd(14) has no driver
Warning (10034): Output port "HEX0[1]" at TEST.vhd(14) has no driver
Warning (10034): Output port "HEX0[2]" at TEST.vhd(14) has no driver
Warning (10034): Output port "HEX0[3]" at TEST.vhd(14) has no driver
Warning (10034): Output port "HEX0[4]" at TEST.vhd(14) has no driver
Warning (10034): Output port "HEX0[5]" at TEST.vhd(14) has no driver
Warning (10034): Output port "HEX0[6]" at TEST.vhd(14) has no driver
Warning (10034): Output port "HEX1[0]" at TEST.vhd(15) has no driver
Warning (10034): Output port "HEX1[1]" at TEST.vhd(15) has no driver
Warning (10034): Output port "HEX1[2]" at TEST.vhd(15) has no driver
Warning (10034): Output port "HEX1[3]" at TEST.vhd(15) has no driver
Warning (10034): Output port "HEX1[4]" at TEST.vhd(15) has no driver
Warning (10034): Output port "HEX1[5]" at TEST.vhd(15) has no driver
Warning (10034): Output port "HEX1[6]" at TEST.vhd(15) has no driver
Warning (10034): Output port "HEX2[0]" at TEST.vhd(16) has no driver
Warning (10034): Output port "HEX2[1]" at TEST.vhd(16) has no driver
Warning (10034): Output port "HEX2[2]" at TEST.vhd(16) has no driver
Warning (10034): Output port "HEX2[3]" at TEST.vhd(16) has no driver
Warning (10034): Output port "HEX2[4]" at TEST.vhd(16) has no driver
Warning (10034): Output port "HEX2[5]" at TEST.vhd(16) has no driver
Warning (10034): Output port "HEX2[6]" at TEST.vhd(16) has no driver
Warning (10034): Output port "HEX3[0]" at TEST.vhd(17) has no driver
Warning (10034): Output port "HEX3[1]" at TEST.vhd(17) has no driver
Warning (10034): Output port "HEX3[2]" at TEST.vhd(17) has no driver
Warning (10034): Output port "HEX3[3]" at TEST.vhd(17) has no driver
Warning (10034): Output port "HEX3[4]" at TEST.vhd(17) has no driver
Warning (10034): Output port "HEX3[5]" at TEST.vhd(17) has no driver
Warning (10034): Output port "HEX3[6]" at TEST.vhd(17) has no driver
Info: Elaborating entity "UART_TX" for hierarchy "UART_TX:TXD_BLOCK"
Warning (14130): Reduced register "UART_TX:TXD_BLOCK|BAUD_DIVIDER[0]" with stuck data_in port to stuck value GND
Warning (14130): Reduced register "UART_TX:TXD_BLOCK|BAUD_DIVIDER[1]" with stuck data_in port to stuck value GND
Warning (14130): Reduced register "UART_TX:TXD_BLOCK|BAUD_DIVIDER[2]" with stuck data_in port to stuck value GND
Warning (14130): Reduced register "UART_TX:TXD_BLOCK|BAUD_DIVIDER[3]" with stuck data_in port to stuck value GND
Warning (14130): Reduced register "UART_TX:TXD_BLOCK|BAUD_DIVIDER[4]" with stuck data_in port to stuck value GND
Warning (14130): Reduced register "UART_TX:TXD_BLOCK|BAUD_DIVIDER[5]" with stuck data_in port to stuck value GND
Warning (14130): Reduced register "UART_TX:TXD_BLOCK|BAUD_DIVIDER[6]" with stuck data_in port to stuck value GND
Info: State machine "|TEST|UART_TX:TXD_BLOCK|STATE" contains 11 states
Info: Selected Auto state machine encoding method for state machine "|TEST|UART_TX:TXD_BLOCK|STATE"
Info: Encoding result for state machine "|TEST|UART_TX:TXD_BLOCK|STATE"
    Info: Completed encoding using 11 state bits
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.stop"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.bit7"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.bit6"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.bit5"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.bit4"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.bit3"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.bit2"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.bit1"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.bit0"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.start"
        Info: Encoded state bit "UART_TX:TXD_BLOCK|STATE.idle"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.idle" uses code string "00000000000"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.start" uses code string "00000000011"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.bit0" uses code string "00000000101"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.bit1" uses code string "00000001001"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.bit2" uses code string "00000010001"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.bit3" uses code string "00000100001"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.bit4" uses code string "00001000001"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.bit5" uses code string "00010000001"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.bit6" uses code string "00100000001"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.bit7" uses code string "01000000001"
    Info: State "|TEST|UART_TX:TXD_BLOCK|STATE.stop" uses code string "10000000001"
Warning: Output pins are stuck at VCC or GND
    Warning (13410): Pin "LEDG[0]" is stuck at GND
    Warning (13410): Pin "LEDG[1]" is stuck at GND
    Warning (13410): Pin "LEDG[2]" is stuck at GND
    Warning (13410): Pin "LEDG[3]" is stuck at GND
    Warning (13410): Pin "LEDG[4]" is stuck at GND
    Warning (13410): Pin "LEDG[5]" is stuck at GND
    Warning (13410): Pin "LEDG[6]" is stuck at GND
    Warning (13410): Pin "LEDG[7]" is stuck at GND
    Warning (13410): Pin "HEX0[6]" is stuck at GND
    Warning (13410): Pin "HEX0[5]" is stuck at GND
    Warning (13410): Pin "HEX0[4]" is stuck at GND
    Warning (13410): Pin "HEX0[3]" is stuck at GND
    Warning (13410): Pin "HEX0[2]" is stuck at GND
    Warning (13410): Pin "HEX0[1]" is stuck at GND
    Warning (13410): Pin "HEX0[0]" is stuck at GND
    Warning (13410): Pin "HEX1[6]" is stuck at GND
    Warning (13410): Pin "HEX1[5]" is stuck at GND
    Warning (13410): Pin "HEX1[4]" is stuck at GND
    Warning (13410): Pin "HEX1[3]" is stuck at GND
    Warning (13410): Pin "HEX1[2]" is stuck at GND
    Warning (13410): Pin "HEX1[1]" is stuck at GND
    Warning (13410): Pin "HEX1[0]" is stuck at GND
    Warning (13410): Pin "HEX2[6]" is stuck at GND
    Warning (13410): Pin "HEX2[5]" is stuck at GND
    Warning (13410): Pin "HEX2[4]" is stuck at GND
    Warning (13410): Pin "HEX2[3]" is stuck at GND
    Warning (13410): Pin "HEX2[2]" is stuck at GND
    Warning (13410): Pin "HEX2[1]" is stuck at GND
    Warning (13410): Pin "HEX2[0]" is stuck at GND
    Warning (13410): Pin "HEX3[6]" is stuck at GND
    Warning (13410): Pin "HEX3[5]" is stuck at GND
    Warning (13410): Pin "HEX3[4]" is stuck at GND
    Warning (13410): Pin "HEX3[3]" is stuck at GND
    Warning (13410): Pin "HEX3[2]" is stuck at GND
    Warning (13410): Pin "HEX3[1]" is stuck at GND
    Warning (13410): Pin "HEX3[0]" is stuck at GND
Warning: Design contains 6 input pin(s) that do not drive logic
    Warning (15610): No output dependent on input pin "UART_RXD"
    Warning (15610): No output dependent on input pin "SW[8]"
    Warning (15610): No output dependent on input pin "KEY[0]"
    Warning (15610): No output dependent on input pin "KEY[1]"
    Warning (15610): No output dependent on input pin "KEY[2]"
    Warning (15610): No output dependent on input pin "KEY[3]"
Info: Implemented 108 device resources after synthesis - the final resource count might be different
    Info: Implemented 16 input pins
    Info: Implemented 47 output pins
    Info: Implemented 45 logic cells
Info: Quartus II Analysis & Synthesis was successful. 0 errors, 87 warnings
    Info: Peak virtual memory: 196 megabytes
    Info: Processing ended: Tue Oct 21 15:47:01 2008
    Info: Elapsed time: 00:00:02
    Info: Total CPU time (on all processors): 00:00:02