📄 at91sam7s512.h
字号:
#define MC_RCR (AT91_CAST(AT91_REG *) 0x00000000) // (MC_RCR) MC Remap Control Register
#define MC_ASR (AT91_CAST(AT91_REG *) 0x00000004) // (MC_ASR) MC Abort Status Register
#define MC_AASR (AT91_CAST(AT91_REG *) 0x00000008) // (MC_AASR) MC Abort Address Status Register
#define MC_PUIA (AT91_CAST(AT91_REG *) 0x00000010) // (MC_PUIA) MC Protection Unit Area
#define MC_PUP (AT91_CAST(AT91_REG *) 0x00000050) // (MC_PUP) MC Protection Unit Peripherals
#define MC_PUER (AT91_CAST(AT91_REG *) 0x00000054) // (MC_PUER) MC Protection Unit Enable Register
#endif
// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register --------
#define AT91C_MC_RCB (0x1 << 0) // (MC) Remap Command Bit
// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register --------
#define AT91C_MC_UNDADD (0x1 << 0) // (MC) Undefined Addess Abort Status
#define AT91C_MC_MISADD (0x1 << 1) // (MC) Misaligned Addess Abort Status
#define AT91C_MC_MPU (0x1 << 2) // (MC) Memory protection Unit Abort Status
#define AT91C_MC_ABTSZ (0x3 << 8) // (MC) Abort Size Status
#define AT91C_MC_ABTSZ_BYTE (0x0 << 8) // (MC) Byte
#define AT91C_MC_ABTSZ_HWORD (0x1 << 8) // (MC) Half-word
#define AT91C_MC_ABTSZ_WORD (0x2 << 8) // (MC) Word
#define AT91C_MC_ABTTYP (0x3 << 10) // (MC) Abort Type Status
#define AT91C_MC_ABTTYP_DATAR (0x0 << 10) // (MC) Data Read
#define AT91C_MC_ABTTYP_DATAW (0x1 << 10) // (MC) Data Write
#define AT91C_MC_ABTTYP_FETCH (0x2 << 10) // (MC) Code Fetch
#define AT91C_MC_MST0 (0x1 << 16) // (MC) Master 0 Abort Source
#define AT91C_MC_MST1 (0x1 << 17) // (MC) Master 1 Abort Source
#define AT91C_MC_SVMST0 (0x1 << 24) // (MC) Saved Master 0 Abort Source
#define AT91C_MC_SVMST1 (0x1 << 25) // (MC) Saved Master 1 Abort Source
// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area --------
#define AT91C_MC_PROT (0x3 << 0) // (MC) Protection
#define AT91C_MC_PROT_PNAUNA (0x0) // (MC) Privilege: No Access, User: No Access
#define AT91C_MC_PROT_PRWUNA (0x1) // (MC) Privilege: Read/Write, User: No Access
#define AT91C_MC_PROT_PRWURO (0x2) // (MC) Privilege: Read/Write, User: Read Only
#define AT91C_MC_PROT_PRWURW (0x3) // (MC) Privilege: Read/Write, User: Read/Write
#define AT91C_MC_SIZE (0xF << 4) // (MC) Internal Area Size
#define AT91C_MC_SIZE_1KB (0x0 << 4) // (MC) Area size 1KByte
#define AT91C_MC_SIZE_2KB (0x1 << 4) // (MC) Area size 2KByte
#define AT91C_MC_SIZE_4KB (0x2 << 4) // (MC) Area size 4KByte
#define AT91C_MC_SIZE_8KB (0x3 << 4) // (MC) Area size 8KByte
#define AT91C_MC_SIZE_16KB (0x4 << 4) // (MC) Area size 16KByte
#define AT91C_MC_SIZE_32KB (0x5 << 4) // (MC) Area size 32KByte
#define AT91C_MC_SIZE_64KB (0x6 << 4) // (MC) Area size 64KByte
#define AT91C_MC_SIZE_128KB (0x7 << 4) // (MC) Area size 128KByte
#define AT91C_MC_SIZE_256KB (0x8 << 4) // (MC) Area size 256KByte
#define AT91C_MC_SIZE_512KB (0x9 << 4) // (MC) Area size 512KByte
#define AT91C_MC_SIZE_1MB (0xA << 4) // (MC) Area size 1MByte
#define AT91C_MC_SIZE_2MB (0xB << 4) // (MC) Area size 2MByte
#define AT91C_MC_SIZE_4MB (0xC << 4) // (MC) Area size 4MByte
#define AT91C_MC_SIZE_8MB (0xD << 4) // (MC) Area size 8MByte
#define AT91C_MC_SIZE_16MB (0xE << 4) // (MC) Area size 16MByte
#define AT91C_MC_SIZE_64MB (0xF << 4) // (MC) Area size 64MByte
#define AT91C_MC_BA (0x3FFFF << 10) // (MC) Internal Area Base Address
// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral --------
// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area --------
#define AT91C_MC_PUEB (0x1 << 0) // (MC) Protection Unit enable Bit
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Serial Parallel Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_SPI {
AT91_REG SPI_CR; // Control Register
AT91_REG SPI_MR; // Mode Register
AT91_REG SPI_RDR; // Receive Data Register
AT91_REG SPI_TDR; // Transmit Data Register
AT91_REG SPI_SR; // Status Register
AT91_REG SPI_IER; // Interrupt Enable Register
AT91_REG SPI_IDR; // Interrupt Disable Register
AT91_REG SPI_IMR; // Interrupt Mask Register
AT91_REG Reserved0[4]; //
AT91_REG SPI_CSR[4]; // Chip Select Register
AT91_REG Reserved1[48]; //
AT91_REG SPI_RPR; // Receive Pointer Register
AT91_REG SPI_RCR; // Receive Counter Register
AT91_REG SPI_TPR; // Transmit Pointer Register
AT91_REG SPI_TCR; // Transmit Counter Register
AT91_REG SPI_RNPR; // Receive Next Pointer Register
AT91_REG SPI_RNCR; // Receive Next Counter Register
AT91_REG SPI_TNPR; // Transmit Next Pointer Register
AT91_REG SPI_TNCR; // Transmit Next Counter Register
AT91_REG SPI_PTCR; // PDC Transfer Control Register
AT91_REG SPI_PTSR; // PDC Transfer Status Register
} AT91S_SPI, *AT91PS_SPI;
#else
#define SPI_CR (AT91_CAST(AT91_REG *) 0x00000000) // (SPI_CR) Control Register
#define SPI_MR (AT91_CAST(AT91_REG *) 0x00000004) // (SPI_MR) Mode Register
#define SPI_RDR (AT91_CAST(AT91_REG *) 0x00000008) // (SPI_RDR) Receive Data Register
#define SPI_TDR (AT91_CAST(AT91_REG *) 0x0000000C) // (SPI_TDR) Transmit Data Register
#define SPI_SR (AT91_CAST(AT91_REG *) 0x00000010) // (SPI_SR) Status Register
#define SPI_IER (AT91_CAST(AT91_REG *) 0x00000014) // (SPI_IER) Interrupt Enable Register
#define SPI_IDR (AT91_CAST(AT91_REG *) 0x00000018) // (SPI_IDR) Interrupt Disable Register
#define SPI_IMR (AT91_CAST(AT91_REG *) 0x0000001C) // (SPI_IMR) Interrupt Mask Register
#define SPI_CSR (AT91_CAST(AT91_REG *) 0x00000030) // (SPI_CSR) Chip Select Register
#endif
// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register --------
#define AT91C_SPI_SPIEN (0x1 << 0) // (SPI) SPI Enable
#define AT91C_SPI_SPIDIS (0x1 << 1) // (SPI) SPI Disable
#define AT91C_SPI_SWRST (0x1 << 7) // (SPI) SPI Software reset
#define AT91C_SPI_LASTXFER (0x1 << 24) // (SPI) SPI Last Transfer
// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register --------
#define AT91C_SPI_MSTR (0x1 << 0) // (SPI) Master/Slave Mode
#define AT91C_SPI_PS (0x1 << 1) // (SPI) Peripheral Select
#define AT91C_SPI_PS_FIXED (0x0 << 1) // (SPI) Fixed Peripheral Select
#define AT91C_SPI_PS_VARIABLE (0x1 << 1) // (SPI) Variable Peripheral Select
#define AT91C_SPI_PCSDEC (0x1 << 2) // (SPI) Chip Select Decode
#define AT91C_SPI_FDIV (0x1 << 3) // (SPI) Clock Selection
#define AT91C_SPI_MODFDIS (0x1 << 4) // (SPI) Mode Fault Detection
#define AT91C_SPI_LLB (0x1 << 7) // (SPI) Clock Selection
#define AT91C_SPI_PCS (0xF << 16) // (SPI) Peripheral Chip Select
#define AT91C_SPI_DLYBCS (0xFF << 24) // (SPI) Delay Between Chip Selects
// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register --------
#define AT91C_SPI_RD (0xFFFF << 0) // (SPI) Receive Data
#define AT91C_SPI_RPCS (0xF << 16) // (SPI) Peripheral Chip Select Status
// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register --------
#define AT91C_SPI_TD (0xFFFF << 0) // (SPI) Transmit Data
#define AT91C_SPI_TPCS (0xF << 16) // (SPI) Peripheral Chip Select Status
// -------- SPI_SR : (SPI Offset: 0x10) Status Register --------
#define AT91C_SPI_RDRF (0x1 << 0) // (SPI) Receive Data Register Full
#define AT91C_SPI_TDRE (0x1 << 1) // (SPI) Transmit Data Register Empty
#define AT91C_SPI_MODF (0x1 << 2) // (SPI) Mode Fault Error
#define AT91C_SPI_OVRES (0x1 << 3) // (SPI) Overrun Error Status
#define AT91C_SPI_ENDRX (0x1 << 4) // (SPI) End of Receiver Transfer
#define AT91C_SPI_ENDTX (0x1 << 5) // (SPI) End of Receiver Transfer
#define AT91C_SPI_RXBUFF (0x1 << 6) // (SPI) RXBUFF Interrupt
#define AT91C_SPI_TXBUFE (0x1 << 7) // (SPI) TXBUFE Interrupt
#define AT91C_SPI_NSSR (0x1 << 8) // (SPI) NSSR Interrupt
#define AT91C_SPI_TXEMPTY (0x1 << 9) // (SPI) TXEMPTY Interrupt
#define AT91C_SPI_SPIENS (0x1 << 16) // (SPI) Enable Status
// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register --------
// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register --------
// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register --------
// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register --------
#define AT91C_SPI_CPOL (0x1 << 0) // (SPI) Clock Polarity
#define AT91C_SPI_NCPHA (0x1 << 1) // (SPI) Clock Phase
#define AT91C_SPI_CSAAT (0x1 << 3) // (SPI) Chip Select Active After Transfer
#define AT91C_SPI_BITS (0xF << 4) // (SPI) Bits Per Transfer
#define AT91C_SPI_BITS_8 (0x0 << 4) // (SPI) 8 Bits Per transfer
#define AT91C_SPI_BITS_9 (0x1 << 4) // (SPI) 9 Bits Per transfer
#define AT91C_SPI_BITS_10 (0x2 << 4) // (SPI) 10 Bits Per transfer
#define AT91C_SPI_BITS_11 (0x3 << 4) // (SPI) 11 Bits Per transfer
#define AT91C_SPI_BITS_12 (0x4 << 4) // (SPI) 12 Bits Per transfer
#define AT91C_SPI_BITS_13 (0x5 << 4) // (SPI) 13 Bits Per transfer
#define AT91C_SPI_BITS_14 (0x6 << 4) // (SPI) 14 Bits Per transfer
#define AT91C_SPI_BITS_15 (0x7 << 4) // (SPI) 15 Bits Per transfer
#define AT91C_SPI_BITS_16 (0x8 << 4) // (SPI) 16 Bits Per transfer
#define AT91C_SPI_SCBR (0xFF << 8) // (SPI) Serial Clock Baud Rate
#define AT91C_SPI_DLYBS (0xFF << 16) // (SPI) Delay Before SPCK
#define AT91C_SPI_DLYBCT (0xFF << 24) // (SPI) Delay Between Consecutive Transfers
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Analog to Digital Convertor
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_ADC {
AT91_REG ADC_CR; // ADC Control Register
AT91_REG ADC_MR; // ADC Mode Register
AT91_REG Reserved0[2]; //
AT91_REG ADC_CHER; // ADC Channel Enable Register
AT91_REG ADC_CHDR; // ADC Channel Disable Register
AT91_REG ADC_CHSR; // ADC Channel Status Register
AT91_REG ADC_SR; // ADC Status Register
AT91_REG ADC_LCDR; // ADC Last Converted Data Register
AT91_REG ADC_IER; // ADC Interrupt Enable Register
AT91_REG ADC_IDR; // ADC Interrupt Disable Register
AT91_REG ADC_IMR; // ADC Interrupt Mask Register
AT91_REG ADC_CDR0; // ADC Channel Data Register 0
AT91_REG ADC_CDR1; // ADC Channel Data Register 1
AT91_REG ADC_CDR2; // ADC Channel Data Register 2
AT91_REG ADC_CDR3; // ADC Channel Data Register 3
AT91_REG ADC_CDR4; // ADC Channel Data Register 4
AT91_REG ADC_CDR5; // ADC Channel Data Register 5
AT91_REG ADC_CDR6; // ADC Channel Data Register 6
AT91_REG ADC_CDR7; // ADC Channel Data Register 7
AT91_REG Reserved1[44]; //
AT91_REG ADC_RPR; // Receive Pointer Register
AT91_REG ADC_RCR; // Receive Counter Register
AT91_REG ADC_TPR; // Transmit Pointer Register
AT91_REG ADC_TCR; // Transmit Counter Register
AT91_REG ADC_RNPR; // Receive Next Pointer Register
AT91_REG ADC_RNCR; // Receive Next Counter Register
AT91_REG ADC_TNPR; // Transmit Next Pointer Register
AT91_REG ADC_TNCR; // Transmit Next Counter Register
AT91_REG ADC_PTCR; // PDC Transfer Control Register
AT91_REG ADC_PTSR; // PDC Transfer Status Register
} AT91S_ADC, *AT91PS_ADC;
#else
#define ADC_CR (AT91_CAST(AT91_REG *) 0x00000000) // (ADC_CR) ADC Control Register
#define ADC_MR (AT91_CAST(AT91_REG *) 0x00000004) // (ADC_MR) ADC Mode Register
#define ADC_CHER (AT91_CAST(AT91_REG *) 0x00000010) // (ADC_CHER) ADC Channel Enable Register
#define ADC_CHDR (AT91_CAST(AT91_REG *) 0x00000014) // (ADC_CHDR) ADC Channel Disable Register
#define ADC_CHSR (AT91_CAST(AT91_REG *) 0x00000018) // (ADC_CHSR) ADC Channel Status Register
#define ADC_SR (AT91_CAST(AT91_REG *) 0x0000001C) // (ADC_SR) ADC Status Register
#define ADC_LCDR (AT91_CAST(AT91_REG *) 0x00000020) // (ADC_LCDR) ADC Last Converted Data Register
#define ADC_IER (AT91_CAST(AT91_REG *) 0x00000024) // (ADC_IER) ADC Interrupt Enable Register
#define ADC_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (ADC_IDR) ADC Interrupt Disable Register
#define ADC_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (ADC_IMR) ADC Interrupt Mask Register
#define ADC_CDR0 (AT91_CAST(AT91_REG *) 0x00000030) // (ADC_CDR0) ADC Channel Data Register 0
#define ADC_CDR1 (AT91_CAST(AT91_REG *) 0x00000034) // (ADC_CDR1) ADC Channel Data Register 1
#define ADC_CDR2 (AT91_CAST(AT91_REG *) 0x00000038) // (ADC_CDR2) ADC Channel Data Register 2
#define ADC_CDR3 (AT91_CAST(AT91_REG *) 0x0000003C) // (ADC_CDR3) ADC Channel Data Register 3
#define ADC_CDR4 (AT91_CAST(AT91_REG *) 0x00000040) // (ADC_CDR4) ADC Channel Data Register 4
#define ADC_CDR5 (AT91_CAST(AT91_REG *) 0x00000044) // (ADC_CDR5) ADC Channel Data Register 5
#define ADC_CDR6 (AT91_CAST(AT91_REG *) 0x00000048) // (ADC_CDR6) A⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -