platform.reg

samsung arm9 s3c2440 wince5.0 lcd driver

;
; Copyright (c) Microsoft Corporation.  All rights reserved.
;
;
; Use of this source code is subject to the terms of the Microsoft end-user
; license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
; If you did not accept the terms of the EULA, you are not authorized to use
; this source code. For a copy of the EULA, please see the LICENSE.RTF on your
; install media.
;

; Our variables
#define BUILTIN_ROOT HKEY_LOCAL_MACHINE\Drivers\BuiltIn
#define DRIVERS_DIR $(_PUBLICROOT)\common\oak\drivers


; @CESYSGEN IF WCESHELLFE_MODULES_CTLPNL
; This registry setting controls the checkboxes displayed in the Sounds CPL
; under "enable clicks & taps". Set bit0 if you have a keyboard, set bit1 if
; you have a touch screen. Set bit2 if you have HW buttons (NOTE: for now
; HW buttons are mutually exclusive with the keyboard)
[HKEY_LOCAL_MACHINE\ControlPanel]
    "InputConfig"=dword:3   ; 3 => keybd and touch screen
; @CESYSGEN ENDIF WCESHELLFE_MODULES_CTLPNL

; @CESYSGEN IF WCESHELLFE_MODULES_EXPLORER
; This registry setting controls display of the Explorer's suspend menu button
[HKEY_LOCAL_MACHINE\Explorer]
    "Suspend"=dword:1
    
; Disable Suspend
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power]
	"BattPowerOff"=dword:0
	"ExtPowerOff"=dword:0
	"WakeupPowerOff"=dword:0
	"ScreenPowerOff"=dword:0
; @CESYSGEN ENDIF WCESHELLFE_MODULES_EXPLORER


; @CESYSGEN IF CE_MODULES_DEVICE
;------------------------HIVE-----------------------------------
; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE\Drivers\Resources\IRQ]
   "Identifier"=dword:1
   "Minimum"=dword:1
   "Space"=dword:20
   "Ranges"="1-0x20"
;  "Shared"=""

[HKEY_LOCAL_MACHINE\Drivers\Resources\IO]
   "Identifier"=dword:2
   "Minimum"=dword:0
   "Space"=dword:10000
   "Ranges"="0-0xFFFF"
; END HIVE BOOT SECTION
;------------------------------------------------------------

; @CESYSGEN IF CE_MODULES_BATTDRVR
#include "$(DRIVERS_DIR)\battdrvr\battdrvr.reg"
; @CESYSGEN ENDIF CE_MODULES_BATTDRVR

; @CESYSGEN IF CE_MODULES_NLEDDRVR
#include "$(DRIVERS_DIR)\nleddrvr\nleddrvr.reg"
; @CESYSGEN ENDIF CE_MODULES_NLEDDRVR

; @CESYSGEN IF CE_MODULES_POINTER   
IF BSP_NOTOUCH !
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
	"MaxCalError"=dword:7
; for 640x480 display
	"CalibrationData"="1280,876 352,1590 2198,1604 2213,165 311,169"
; for 240x320 display
;	"CalibrationData"="1247,896 2263,223 281,219 284,1553 2242,1578"
; for 320x240 display
;	"CalibrationData"="1274,908 2192,171 331,173 346,1647 2186,1647"
ENDIF BSP_NOTOUCH !
; @CESYSGEN ENDIF CE_MODULES_POINTER   

; @CESYSGEN IF CE_MODULES_SERIAL
IF BSP_NOSERIAL !
IF BSP_NOUART0 !
IF BSP_KITL != SERIAL_UART0
;=============== UART0 (physical COM1 connector P1) (Serial) ===============
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial]
   "DeviceArrayIndex"=dword:0
   "Irq"=dword:1c
   "MemBase"=dword:50000000
   "MemLen"=dword:2C
   "InterruptBitsShift"=dword:0 ; UART 0 Interrupt Sub Register shift bit.
   "ISTTimeouts"=dword:200	; every 512 ticks checking Modem status.
   "Prefix"="COM"
   "Index"=dword:1
   "Dll"="serial_smdk2440.dll"
   "Order"=dword:0
   "Priority"=dword:0
   "Port"="COM1:"
   "DeviceType"=dword:0
   "FriendlyName"=LOC_DISPLAYNAME_COM1
   "Tsp"="unimodem.dll"
   "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
ENDIF
ENDIF

IF BSP_NOIRDA !
; S2440 IrDA(UART2)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IRDA2440]
   "DeviceArrayIndex"=dword:1
   "Irq"=dword:f
   "MemBase"=dword:50008000
   "MemLen"=dword:2C
   "InterruptBitsShift"=dword:6 ; UART 2 Interrupt Sub Register shift bit.
   ;"ISTTimeouts"=dword:200	; every 512 ticks checking Modem status.
   "Prefix"="COM"
   "Index"=dword:4
   "Dll"="serial_smdk2440.Dll"
   "Order"=dword:0
   "Priority"=dword:0
   "Port"="COM4:"
   "DeviceType"=dword:0  ; IRDA modem, 0 -> null modem
   "FriendlyName"=LOC_DISPLAYNAME_RAWIR
   "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
ENDIF

[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
   "Port"=dword:4
   ; 0 = Use external dongle, 1 = Use internal IR
   "IntIR"=dword:1
   ; 0 - internal transceiver, 1 - Extended Systems JetEye dongle.
   "TransceiverType"=dword:0

ENDIF BSP_NOSERIAL !
;=========== End of UART(Serial) ===============
; @CESYSGEN ENDIF CE_MODULES_SERIAL

; @CESYSGEN IF CE_MODULES_KEYBD
; Keybd driver is the same.
IF BSP_NOKEYBD !
#include "$(DRIVERS_DIR)\keybd\keybd.reg"

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
    "DriverName"="kbdmouse.dll"
    "Irq"=dword:1
    "IOBase"=dword:B1600000
    "SSPBase"=dword:B1900000

#include "$(DRIVERS_DIR)\keybd\LayMgr.reg"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\$(input_locale)]
	"Matrix"="kbdmouse.dll"


; @CESYSGEN IF CE_MODULES_KBDA1
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000401]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDA1

; @CESYSGEN IF CE_MODULES_KBDHEB
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000040D]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDHEB

; @CESYSGEN IF CE_MODULES_KBDTH0
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000041E]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDTH0

; @CESYSGEN IF CE_MODULES_KBDINHIN
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00010439]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINHIN

; @CESYSGEN IF CE_MODULES_KBDINMAR
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000044E]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINMAR

; @CESYSGEN IF CE_MODULES_KBDINPUN
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000446]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINPUN

; @CESYSGEN IF CE_MODULES_KBDINTEL
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000044A]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINTEL

; @CESYSGEN IF CE_MODULES_KBDINGUJ
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000447]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINGUJ

; @CESYSGEN IF CE_MODULES_KBDINKAN
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000044B]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINKAN

; @CESYSGEN IF CE_MODULES_KBDINTAM
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000449]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINTAM

; @CESYSGEN IF CE_MODULES_KBDDV
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00010409]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDDV

ENDIF BSP_NOKEYBD !
; @CESYSGEN ENDIF CE_MODULES_KEYBD


; @CESYSGEN IF CE_MODULES_PCCARD
IF BSP_NOPCCARD !
;#include "$(_TARGETPLATROOT)\src\drivers\pccard\pcc_smdk2440.reg"
#include "$(DRIVERS_DIR)\pccard\mdd\pcc_serv.reg"
[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA]
   "Dll"="pcmcia.dll"
   "NoConfig"=dword:1
   "NoISR"=dword:1 ; Do not load any ISR.
   "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA Card Services"
ENDIF BSP_NOPCCARD !
; @CESYSGEN ENDIF CE_MODULES_PCCARD

; @CESYSGEN IF CE_MODULES_SDBUS
IF BSP_SDHC_SC2440

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC_SMDK2440]
    "Order"=dword:21
    "Dll"="sdhc_sc2440.dll"
    "Prefix"="SDH"
    
    "DMAChannel"=dword:0            ; DMA channel to use.  Set to 0xffffffff to disable DMA
    "DMAIrq"=dword:11
    "DMA_IST_Priority"=dword:96

    "SDIOIrq"=dword:15
    "SDIO_IST_Priority"=dword:97
    
    "PollingTimeout"=dword:100      ; 100 ms
    "CardDetect_Thread_Priority"=dword:98
    
    "CardDetectGPIO"="G"            ; card detect on GPG8
    "CardDetectMask"=dword:100
    "CardDetectFlag"=dword:0
    "CardDetectControlMask"=dword:fffcffff
    "CardDetectControlFlag"=dword:0
    "CardDetectPullupMask"=dword:fffffeff
    "CardDetectPullupFlag"=dword:100
    
    "CardReadWriteGPIO"="H"         ; card R/W on GPH8
    "CardReadWriteMask"=dword:100
    "CardReadWriteFlag"=dword:100
    "CardReadWriteControlMask"=dword:fffcffff
    "CardReadWriteControlFlag"=dword:0
    "CardReadWritePullupMask"=dword:fffffeff
    "CardReadWritePullupFlag"=dword:100

    "HandleBusyFinishOnCommand38"=dword:1
    "DmaTransferTimeoutFactor"=dword:8
    "DmaTransferTimeoutConstant"=dword:3000

ENDIF BSP_SDHC_SC2440
; @CESYSGEN ENDIF CE_MODULES_SDBUS


;------------ I2C Driver ------------------------------------------------------------------------------------
IF BSP_NOI2C !
;; I2C Bus Driver
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\I2C]
    "Prefix"="I2C"
    "Dll"="I2C.DLL"
    "Order"=dword:0
    "Index"=dword:0
    "Mode"=dword:1              ; Mode: 0 = POLLING, 1 = INTERRUPT
    "SlaveAddress"=dword:0      ; Bus Driver's Slave Address
    "FriendlyName"="I2C Bus Driver"
    "IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"   ; Power-manageable generic
ENDIF BSP_NOI2C !  


;------------- Camera Driver ------------------------------------------------------------------------------------
IF BSP_NOCAMERA !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Camera]
   "Prefix"="CIS"
   "Dll"="camera.dll"
   "Index"=dword:1
   "Order"=dword:1
   "IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
ENDIF BSP_NOCAMERA!


IF BSP_NOPWRBTN !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Matrixkb]
    "Dll"="matrixkb.dll"
    "Prefix"="MKB"
    "Index"=dword:1
    "Order"=dword:10