sources.ce.50.cf8385pn

marvell wifi driver CF-8385PN-NDIS-ARM4-WINCE50-5.24.17.p5-27.p11.src.zip

!IF 0

(c) Marvell Semiconductor, Inc., 2001 - 2002

Description:
    NDIS 5.1 driver nmake macro file, which provides the target, include
	and source files information.

!ENDIF

TARGETTYPE=DYNLINK
TARGETNAME=CF8385PN
#DEFFILE=$(TARGETDEFNAME).def
DLLENTRY=DllEntry

TARGETLIBS= \
    $(_PROJECTROOT)\cesysgen\sdk\lib\$(_TGTCPU)\$(WINCEDEBUG)\coredll.lib \
    $(_PROJECTROOT)\cesysgen\sdk\lib\$(_TGTCPU)\$(WINCEDEBUG)\ntcompat.lib \
    $(_PROJECTROOT)\cesysgen\sdk\lib\$(_TGTCPU)\$(WINCEDEBUG)\ndis.lib \
    $(_PROJECTROOT)\cesysgen\oak\lib\$(_TGTCPU)\$(WINCEDEBUG)\ceddk.lib

INCLUDES= \
		.\;\
    $(_PROJECTROOT)\cesysgen\sdk\inc;\
    $(_PROJECTROOT)\cesysgen\ddk\inc;\
    $(_PROJECTROOT)\cesysgen\oak\inc;


CDEFINES=$(CDEFINES) -DCF_DRIVER=1 -DNDIS51_MINIPORT=1 -DNDIS_MINIPORT_DRIVER=1 -DMRVL_WINXP_NDIS51=1 -DWHQL_FIX=1
CDEFINES=$(CDEFINES) /W2
CDEFINES=$(CDEFINES) -DUNDER_CE_XSCALE -DPOCKETPC_FIX
CDEFINES=$(CDEFINES) -DIPAQ_ODD_UCHAR_ACCESS_FIX

# uncomment this to build interface 2.0
CDEFINES=$(CDEFINES) -DINTERFACE20

# uncomment to enable WPA support
CDEFINES=$(CDEFINES) -DWPA

# uncomment this to include delay to start power save mode
#CDEFINES=$(CDEFINES)  -DPOWERSAVE_DELAY_WORKAROUND

# uncomment this to include new PS scheme
CDEFINES=$(CDEFINES)  -DNEW_PS_SCHEME

#uncomment and compile in debug mode for dbg msg file
#CDEFINES=$(CDEFINES)  -DMRVL_PRINT_DBG_MSG

#uncomment to enabled HW WEP TX
CDEFINES=$(CDEFINES)  -DMRVL_USE_HW_WEP_TX

# uncomment to use helper image
CDEFINES=$(CDEFINES)  -DMRV_USE_HELPER_IMAGE

CDEFINES=$(CDEFINES)  -DMRV_CHIP_8385PN

# External FW download
#CDEFINES=$(CDEFINES)  -DMRVL_EXTERNAL_FW_DOWNLOAD

# Rev 4 board patch
# CDEFINES=$(CDEFINES)  -DEVALBOARD_REV4_FIX

CDEFINES=$(CDEFINES)  -DMRVL_SET_RF_RADIO

# MRVL_USE_MULTIPLE_DTIM must set before MRVL_SET_REG_DTIM
#CDEFINES=$(CDEFINES)  -DMRVL_USE_MULTIPLE_DTIM
#CDEFINES=$(CDEFINES)  -DMRVL_SET_REG_DTIM

CDEFINES=$(CDEFINES)  -DMRVL_RFCHANNEL

CDEFINES=$(CDEFINES)  -DADHOCAES

CDEFINES=$(CDEFINES)  -DDEEP_SLEEP -DMRVL_SLEEPPARAMS

CDEFINES=$(CDEFINES)  -DHOST_WAKEUP 
#CDEFINES=$(CDEFINES)  -DHOST_WAKEUP_PS

CDEFINES=$(CDEFINES)  -DTLV_SCAN
CDEFINES=$(CDEFINES)  -DTLV_ASSOCIATE
#CDEFINES=$(CDEFINES)  -DENABLE_802_11D
CDEFINES=$(CDEFINES)  -DWPA2

# OPEN the WMM flag now is just for V4 firmware which add 4 bytes ib RxPD structure 
CDEFINES=$(CDEFINES)  -DWMM

# Open Later
#CDEFINES=$(CDEFINES)  -DBG_SCAN
#CDEFINES=$(CDEFINES)  -DENABLE_802_11H_TPC
#CDEFINES=$(CDEFINES)  -DV4_CMDS
CDEFINES=$(CDEFINES)    -DCAL_DATA
#CDEFINES=$(CDEFINES)  -DPMKID_CACHE_CAP
#CDEFINES=$(CDEFINES)  -DPMKID_CACHE_CAP2

CDEFINES=$(CDEFINES)  -DHOST_WAKEUP
#CDEFINES=$(CDEFINES)  -DCCX

SOURCES = cf_ifc.c  \
          cf_util.c \
          initproc.c \
          oidproc.c \
          hwacproc.c \
          cmdproc.c \
          miscproc.c \
          pnpproc.c \
          wep.c \
          TxProc.c \
          RxProc.c \
          IntProc.c \
          power.c \
          cmdsend.c \
          ExitProc.c \
          guicmd.c \
          Wlan_11d.c \
          wlan_ccx.c