s3c2410.h

S3c2410 usb host Firmware....

    #define rDCSRC1     (*(volatile unsigned *)0x4b000058) //DMA 1 Current source
    #define rDCDST1     (*(volatile unsigned *)0x4b00005c) //DMA 1 Current destination
    #define rDMASKTRIG1 (*(volatile unsigned *)0x4b000060) //DMA 1 Mask trigger
    #define rDISRC2     (*(volatile unsigned *)0x4b000080) //DMA 2 Initial source
    #define rDISRCC2    (*(volatile unsigned *)0x4b000084) //DMA 2 Initial source control
    #define rDIDST2     (*(volatile unsigned *)0x4b000088) //DMA 2 Initial Destination
    #define rDIDSTC2    (*(volatile unsigned *)0x4b00008c) //DMA 2 Initial Destination control
    #define rDCON2      (*(volatile unsigned *)0x4b000090) //DMA 2 Control
    #define rDSTAT2     (*(volatile unsigned *)0x4b000094) //DMA 2 Status
    #define rDCSRC2     (*(volatile unsigned *)0x4b000098) //DMA 2 Current source
    #define rDCDST2     (*(volatile unsigned *)0x4b00009c) //DMA 2 Current destination
    #define rDMASKTRIG2 (*(volatile unsigned *)0x4b0000a0) //DMA 2 Mask trigger
    #define rDISRC3     (*(volatile unsigned *)0x4b0000c0) //DMA 3 Initial source
    #define rDISRCC3    (*(volatile unsigned *)0x4b0000c4) //DMA 3 Initial source control
    #define rDIDST3     (*(volatile unsigned *)0x4b0000c8) //DMA 3 Initial Destination
    #define rDIDSTC3    (*(volatile unsigned *)0x4b0000cc) //DMA 3 Initial Destination control
    #define rDCON3      (*(volatile unsigned *)0x4b0000d0) //DMA 3 Control
    #define rDSTAT3     (*(volatile unsigned *)0x4b0000d4) //DMA 3 Status
    #define rDCSRC3     (*(volatile unsigned *)0x4b0000d8) //DMA 3 Current source
    #define rDCDST3     (*(volatile unsigned *)0x4b0000dc) //DMA 3 Current destination
    #define rDMASKTRIG3 (*(volatile unsigned *)0x4b0000e0) //DMA 3 Mask trigger
    // CLOCK & POWER MANAGEMENT
    #define rLOCKTIME   (*(volatile unsigned *)0x4c000000) //PLL lock time counter
    #define rMPLLCON    (*(volatile unsigned *)0x4c000004) //MPLL Control
    #define rUPLLCON    (*(volatile unsigned *)0x4c000008) //UPLL Control
    #define rCLKCON     (*(volatile unsigned *)0x4c00000c) //Clock generator control
    #define rCLKSLOW    (*(volatile unsigned *)0x4c000010) //Slow clock control
    #define rCLKDIVN    (*(volatile unsigned *)0x4c000014) //Clock divider control
    // LCD CONTROLLER
    #define rLCDCON1    (*(volatile unsigned *)0x4d000000) //LCD control 1
    #define rLCDCON2    (*(volatile unsigned *)0x4d000004) //LCD control 2
    #define rLCDCON3    (*(volatile unsigned *)0x4d000008) //LCD control 3
    #define rLCDCON4    (*(volatile unsigned *)0x4d00000c) //LCD control 4
    #define rLCDCON5    (*(volatile unsigned *)0x4d000010) //LCD control 5
    #define rLCDSADDR1  (*(volatile unsigned *)0x4d000014) //STN/TFT Frame buffer start address 1
    #define rLCDSADDR2  (*(volatile unsigned *)0x4d000018) //STN/TFT Frame buffer start address 2
    #define rLCDSADDR3  (*(volatile unsigned *)0x4d00001c) //STN/TFT Virtual screen address set
    #define rREDLUT     (*(volatile unsigned *)0x4d000020) //STN Red lookup table
    #define rGREENLUT   (*(volatile unsigned *)0x4d000024) //STN Green lookup table 
    #define rBLUELUT    (*(volatile unsigned *)0x4d000028) //STN Blue lookup table
    #define rDITHMODE   (*(volatile unsigned *)0x4d00004c) //STN Dithering mode
    #define rTPAL       (*(volatile unsigned *)0x4d000050) //TFT Temporary palette
    #define rLCDINTPND  (*(volatile unsigned *)0x4d000054) //LCD Interrupt pending
    #define rLCDSRCPND  (*(volatile unsigned *)0x4d000058) //LCD Interrupt source
    #define rLCDINTMSK  (*(volatile unsigned *)0x4d00005c) //LCD Interrupt mask
    #define rLPCSEL     (*(volatile unsigned *)0x4d000060) //LPC3600 Control
    #define PALETTE     0x4d000400                         //Palette start address
    // NAND flash
    #define rNFCONF     (*(volatile unsigned *)0x4e000000)      //NAND Flash configuration
    #define rNFCMD      (*(volatile U8 *)0x4e000004)            //NADD Flash command
    #define rNFADDR     (*(volatile U8 *)0x4e000008)            //NAND Flash address
    #define rNFDATA     (*(volatile U8 *)0x4e00000c)            //NAND Flash data
    #define rNFSTAT     (*(volatile unsigned *)0x4e000010)      //NAND Flash operation status
    #define rNFECC      (*(volatile unsigned *)0x4e000014)      //NAND Flash ECC
    #define rNFECC0     (*(volatile U8  *)0x4e000014)
    #define rNFECC1     (*(volatile U8  *)0x4e000015)
    #define rNFECC2     (*(volatile U8  *)0x4e000016)
    // UART
    #define rULCON0     (*(volatile unsigned *)0x50000000) //UART 0 Line control
    #define rUCON0      (*(volatile unsigned *)0x50000004) //UART 0 Control
    #define rUFCON0     (*(volatile unsigned *)0x50000008) //UART 0 FIFO control
    #define rUMCON0     (*(volatile unsigned *)0x5000000c) //UART 0 Modem control
    #define rUTRSTAT0   (*(volatile unsigned *)0x50000010) //UART 0 Tx/Rx status
    #define rUERSTAT0   (*(volatile unsigned *)0x50000014) //UART 0 Rx error status
    #define rUFSTAT0    (*(volatile unsigned *)0x50000018) //UART 0 FIFO status
    #define rUMSTAT0    (*(volatile unsigned *)0x5000001c) //UART 0 Modem status
    #define rUBRDIV0    (*(volatile unsigned *)0x50000028) //UART 0 Baud rate divisor
    #define rULCON1     (*(volatile unsigned *)0x50004000) //UART 1 Line control
    #define rUCON1      (*(volatile unsigned *)0x50004004) //UART 1 Control
    #define rUFCON1     (*(volatile unsigned *)0x50004008) //UART 1 FIFO control
    #define rUMCON1     (*(volatile unsigned *)0x5000400c) //UART 1 Modem control
    #define rUTRSTAT1   (*(volatile unsigned *)0x50004010) //UART 1 Tx/Rx status
    #define rUERSTAT1   (*(volatile unsigned *)0x50004014) //UART 1 Rx error status
    #define rUFSTAT1    (*(volatile unsigned *)0x50004018) //UART 1 FIFO status
    #define rUMSTAT1    (*(volatile unsigned *)0x5000401c) //UART 1 Modem status
    #define rUBRDIV1    (*(volatile unsigned *)0x50004028) //UART 1 Baud rate divisor
    #define rULCON2     (*(volatile unsigned *)0x50008000) //UART 2 Line control
    #define rUCON2      (*(volatile unsigned *)0x50008004) //UART 2 Control
    #define rUFCON2     (*(volatile unsigned *)0x50008008) //UART 2 FIFO control
    #define rUMCON2     (*(volatile unsigned *)0x5000800c) //UART 2 Modem control
    #define rUTRSTAT2   (*(volatile unsigned *)0x50008010) //UART 2 Tx/Rx status
    #define rUERSTAT2   (*(volatile unsigned *)0x50008014) //UART 2 Rx error status
    #define rUFSTAT2    (*(volatile unsigned *)0x50008018) //UART 2 FIFO status
    #define rUMSTAT2    (*(volatile unsigned *)0x5000801c) //UART 2 Modem status
    #define rUBRDIV2    (*(volatile unsigned *)0x50008028) //UART 2 Baud rate divisor
    #ifdef __BIG_ENDIAN
    #define rUTXH0      (*(volatile unsigned char *)0x50000023) //UART 0 Transmission Hold
    #define rURXH0      (*(volatile unsigned char *)0x50000027) //UART 0 Receive buffer
    #define rUTXH1      (*(volatile unsigned char *)0x50004023) //UART 1 Transmission Hold
    #define rURXH1      (*(volatile unsigned char *)0x50004027) //UART 1 Receive buffer
    #define rUTXH2      (*(volatile unsigned char *)0x50008023) //UART 2 Transmission Hold
    #define rURXH2      (*(volatile unsigned char *)0x50008027) //UART 2 Receive buffer
    #define WrUTXH0(ch) (*(volatile unsigned char *)0x50000023)=(unsigned char)(ch)
    #define RdURXH0()   (*(volatile unsigned char *)0x50000027)
    #define WrUTXH1(ch) (*(volatile unsigned char *)0x50004023)=(unsigned char)(ch)
    #define RdURXH1()   (*(volatile unsigned char *)0x50004027)
    #define WrUTXH2(ch) (*(volatile unsigned char *)0x50008023)=(unsigned char)(ch)
    #define RdURXH2()   (*(volatile unsigned char *)0x50008027)
    #define UTXH0       (0x50000020+3)  //Byte_access address by DMA
    #define URXH0       (0x50000024+3)
    #define UTXH1       (0x50004020+3)
    #define URXH1       (0x50004024+3)
    #define UTXH2       (0x50008020+3)
    #define URXH2       (0x50008024+3)
    #else //Little Endian
    #define rUTXH0 (*(volatile unsigned char *)0x50000020) //UART 0 Transmission Hold
    #define rURXH0 (*(volatile unsigned char *)0x50000024) //UART 0 Receive buffer
    #define rUTXH1 (*(volatile unsigned char *)0x50004020) //UART 1 Transmission Hold
    #define rURXH1 (*(volatile unsigned char *)0x50004024) //UART 1 Receive buffer
    #define rUTXH2 (*(volatile unsigned char *)0x50008020) //UART 2 Transmission Hold
    #define rURXH2 (*(volatile unsigned char *)0x50008024) //UART 2 Receive buffer
    #define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch)
    #define RdURXH0()   (*(volatile unsigned char *)0x50000024)
    #define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch)
    #define RdURXH1()   (*(volatile unsigned char *)0x50004024)
    #define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch)
    #define RdURXH2()   (*(volatile unsigned char *)0x50008024)
    #define UTXH0       (0x50000020)    //Byte_access address by DMA
    #define URXH0       (0x50000024)
    #define UTXH1       (0x50004020)
    #define URXH1       (0x50004024)
    #define UTXH2       (0x50008020)
    #define URXH2       (0x50008024)
    #endif
    // PWM TIMER
    #define rTCFG0  (*(volatile unsigned *)0x51000000) //Timer 0 configuration
    #define rTCFG1  (*(volatile unsigned *)0x51000004) //Timer 1 configuration
    #define rTCON   (*(volatile unsigned *)0x51000008) //Timer control
    #define rTCNTB0 (*(volatile unsigned *)0x5100000c) //Timer count buffer 0
    #define rTCMPB0 (*(volatile unsigned *)0x51000010) //Timer compare buffer 0
    #define rTCNTO0 (*(volatile unsigned *)0x51000014) //Timer count observation 0
    #define rTCNTB1 (*(volatile unsigned *)0x51000018) //Timer count buffer 1
    #define rTCMPB1 (*(volatile unsigned *)0x5100001c) //Timer compare buffer 1
    #define rTCNTO1 (*(volatile unsigned *)0x51000020) //Timer count observation 1
    #define rTCNTB2 (*(volatile unsigned *)0x51000024) //Timer count buffer 2
    #define rTCMPB2 (*(volatile unsigned *)0x51000028) //Timer compare buffer 2
    #define rTCNTO2 (*(volatile unsigned *)0x5100002c) //Timer count observation 2
    #define rTCNTB3 (*(volatile unsigned *)0x51000030) //Timer count buffer 3
    #define rTCMPB3 (*(volatile unsigned *)0x51000034) //Timer compare buffer 3
    #define rTCNTO3 (*(volatile unsigned *)0x51000038) //Timer count observation 3
    #define rTCNTB4 (*(volatile unsigned *)0x5100003c) //Timer count buffer 4
    #define rTCNTO4 (*(volatile unsigned *)0x51000040) //Timer count observation 4
    // USB DEVICE
    #ifdef __BIG_ENDIAN
   // <ERROR IF BIG_ENDIAN>
    #define rFUNC_ADDR_REG     (*(volatile unsigned char *)0x52000143) //Function address
    #define rPWR_REG           (*(volatile unsigned char *)0x52000147) //Power management
    #define rEP_INT_REG        (*(volatile unsigned char *)0x5200014b) //EP Interrupt pending and clear
    #define rUSB_INT_REG       (*(volatile unsigned char *)0x5200015b) //USB Interrupt pending and clear
    #define rEP_INT_EN_REG     (*(volatile unsigned char *)0x5200015f) //Interrupt enable
    #define rUSB_INT_EN_REG    (*(volatile unsigned char *)0x5200016f)
    #define rFRAME_NUM1_REG    (*(volatile unsigned char *)0x52000173) //Frame number lower byte
    #define rFRAME_NUM2_REG    (*(volatile unsigned char *)0x52000177) //Frame number higher byte
    #define rINDEX_REG         (*(volatile unsigned char *)0x5200017b) //Register index
    #define rMAXP_REG          (*(volatile unsigned char *)0x52000183) //Endpoint max packet
    #define rEP0_CSR           (*(volatile unsigned char *)0x52000187) //Endpoint 0 status
    #define rIN_CSR1_REG       (*(volatile unsigned char *)0x52000187) //In endpoint control status
    #define rIN_CSR2_REG       (*(volatile unsigned char *)0x5200018b)
    #define rOUT_CSR1_REG      (*(volatile unsigned char *)0x52000193) //Out endpoint control status
    #define rOUT_CSR2_REG      (*(volatile unsigned char *)0x52000197)
    #define rOUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x5200019b) //Endpoint out write count
    #define rOUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019f)
    #define rEP0_FIFO          (*(volatile unsigned char *)0x520001c3) //Endpoint 0 FIFO
    #define rEP1_FIFO          (*(volatile unsigned char *)0x520001c7) //Endpoint 1 FIFO
    #define rEP2_FIFO          (*(volatile unsigned char *)0x520001cb) //Endpoint 2 FIFO
    #define rEP3_FIFO          (*(volatile unsigned char *)0x520001cf) //Endpoint 3 FIFO
    #define rEP4_FIFO          (*(volatile unsigned char *)0x520001d3) //Endpoint 4 FIFO
    #define rEP1_DMA_CON       (*(volatile unsigned char *)0x52000203) //EP1 DMA interface control
    #define rEP1_DMA_UNIT      (*(volatile unsigned char *)0x52000207) //EP1 DMA Tx unit counter
    #define rEP1_DMA_FIFO      (*(volatile unsigned char *)0x5200020b) //EP1 DMA Tx FIFO counter
    #define rEP1_DMA_TTC_L     (*(volatile unsigned char *)0x5200020f) //EP1 DMA total Tx counter
    #define rEP1_DMA_TTC_M     (*(volatile unsigned char *)0x52000213)
    #define rEP1_DMA_TTC_H     (*(volatile unsigned char *)0x52000217)
    #define rEP2_DMA_CON       (*(volatile unsigned char *)0x5200021b) //EP2 DMA interface control
    #define rEP2_DMA_UNIT      (*(volatile unsigned char *)0x5200021f) //EP2 DMA Tx unit counter
    #define rEP2_DMA_FIFO      (*(volatile unsigned char *)0x52000223) //EP2 DMA Tx FIFO counter
    #define rEP2_DMA_TTC_L     (*(volatile unsigned char *)0x52000227) //EP2 DMA total Tx counter
    #define rEP2_DMA_TTC_M     (*(volatile unsigned char *)0x5200022b)
    #define rEP2_DMA_TTC_H     (*(volatile unsigned char *)0x5200022f)
    #define rEP3_DMA_CON       (*(volatile unsigned char *)0x52000243) //EP3 DMA interface control
    #define rEP3_DMA_UNIT      (*(volatile unsigned char *)0x52000247) //EP3 DMA Tx unit counter
    #define rEP3_DMA_FIFO      (*(volatile unsigned char *)0x5200024b) //EP3 DMA Tx FIFO counter
    #define rEP3_DMA_TTC_L     (*(volatile unsigned char *)0x5200024f) //EP3 DMA total Tx counter
    #define rEP3_DMA_TTC_M     (*(volatile unsigned char *)0x52000253)
    #define rEP3_DMA_TTC_H     (*(volatile unsigned char *)0x52000257)
    #define rEP4_DMA_CON       (*(volatile unsigned char *)0x5200025b) //EP4 DMA interface control
    #define rEP4_DMA_UNIT      (*(volatile unsigned char *)0x5200025f) //EP4 DMA Tx unit counter
    #define rEP4_DMA_FIFO      (*(volatile unsigned char *)0x52000263) //EP4 DMA Tx FIFO counter
    #define rEP4_DMA_TTC_L     (*(volatile unsigned char *)0x52000267) //EP4 DMA total Tx counter
    #define rEP4_DMA_TTC_M     (*(volatile unsigned char *)0x5200026b)
    #define rEP4_DMA_TTC_H     (*(volatile unsigned char *)0x5200026f)
    #else  // Little Endian
    #define rFUNC_ADDR_REG     (*(volatile unsigned char *)0x52000140) //Function address
    #define rPWR_REG           (*(volatile unsigned char *)0x52000144) //Power management
    #define rEP_INT_REG        (*(volatile unsigned char *)0x52000148) //EP Interrupt pending and clear
    #define rUSB_INT_REG       (*(volatile unsigned char *)0x52000158) //USB Interrupt pending and clear
    #define rEP_INT_EN_REG     (*(volatile unsigned char *)0x5200015c) //Interrupt enable
    #define rUSB_INT_EN_REG    (*(volatile unsigned char *)0x5200016c)
    #define rFRAME_NUM1_REG    (*(volatile unsigned char *)0x52000170) //Frame number lower byte
    #define rFRAME_NUM2_REG    (*(volatile unsigned char *)0x52000174) //Frame number higher byte
    #define rINDEX_REG         (*(volatile unsigned char *)0x52000178) //Register index
    #define rMAXP_REG          (*(volatile unsigned char *)0x52000180) //Endpoint max packet
    #define rEP0_CSR           (*(volatile unsigned char *)0x52000184) //Endpoint 0 status
    #define rIN_CSR1_REG       (*(volatile unsigned char *)0x52000184) //In endpoint control status
    #define rIN_CSR2_REG       (*(volatile unsigned char *)0x52000188)
    #define rOUT_CSR1_REG      (*(volatile unsigned char *)0x52000190) //Out endpoint control status
    #define rOUT_CSR2_REG      (*(volatile unsigned char *)0x52000194)
    #define rOUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x52000198) //Endpoint out write count
    #define rOUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019c)
    #define rEP0_FIFO          (*(volatile unsigned char *)0x520001c0) //Endpoint 0 FIFO
    #define rEP1_FIFO          (*(volatile unsigned char *)0x520001c4) //Endpoint 1 FIFO
    #define rEP2_FIFO          (*(volatile unsigned char *)0x520001c8) //Endpoint 2 FIFO
    #define rEP3_FIFO          (*(volatile unsigned char *)0x520001cc) //Endpoint 3 FIFO
    #define rEP4_FIFO          (*(volatile unsigned char *)0x520001d0) //Endpoint 4 FIFO
    #define rEP1_DMA_CON       (*(volatile unsigned char *)0x52000200) //EP1 DMA interface control
    #define rEP1_DMA_UNIT      (*(volatile unsigned char *)0x52000204) //EP1 DMA Tx unit counter
    #define rEP1_DMA_FIFO      (*(volatile unsigned char *)0x52000208) //EP1 DMA Tx FIFO counter
    #define rEP1_DMA_TTC_L     (*(volatile unsigned char *)0x5200020c) //EP1 DMA total Tx counter
    #define rEP1_DMA_TTC_M     (*(volatile unsigned char *)0x52000210)
    #define rEP1_DMA_TTC_H     (*(volatile unsigned char *)0x52000214)
    #define rEP2_DMA_CON       (*(volatile unsigned char *)0x52000218) //EP2 DMA interface control
    #define rEP2_DMA_UNIT      (*(volatile unsigned char *)0x5200021c) //EP2 DMA Tx unit counter
    #define rEP2_DMA_FIFO      (*(volatile unsigned char *)0x52000220) //EP2 DMA Tx FIFO counter
    #define rEP2_DMA_TTC_L     (*(volatile unsigned char *)0x52000224) //EP2 DMA total Tx counter
    #define rEP2_DMA_TTC_M     (*(volatile unsigned char *)0x52000228)
    #define rEP2_DMA_TTC_H     (*(volatile unsigned char *)0x5200022c)
    #define rEP3_DMA_CON       (*(volatile unsigned char *)0x52000240) //EP3 DMA interface control
    #define rEP3_DMA_UNIT      (*(volatile unsigned char *)0x52000244) //EP3 DMA Tx unit counter
    #define rEP3_DMA_FIFO      (*(volatile unsigned char *)0x52000248) //EP3 DMA Tx FIFO counter
    #define rEP3_DMA_TTC_L     (*(volatile unsigned char *)0x5200024c) //EP3 DMA total Tx counter
    #define rEP3_DMA_TTC_M     (*(volatile unsigned char *)0x52000250)
    #define rEP3_DMA_TTC_H     (*(volatile unsigned char *)0x52000254)
    #define rEP4_DMA_CON       (*(volatile unsigned char *)0x52000258) //EP4 DMA interface control
    #define rEP4_DMA_UNIT      (*(volatile unsigned char *)0x5200025c) //EP4 DMA Tx unit counter
    #define rEP4_DMA_FIFO      (*(volatile unsigned char *)0x52000260) //EP4 DMA Tx FIFO counter
    #define rEP4_DMA_TTC_L     (*(volatile unsigned char *)0x52000264) //EP4 DMA total Tx counter
    #define rEP4_DMA_TTC_M     (*(volatile unsigned char *)0x52000268)
    #define rEP4_DMA_TTC_H     (*(volatile unsigned char *)0x5200026c)
    #endif   // __BIG_ENDIAN
    // WATCH DOG TIMER
    #define rWTCON   (*(volatile unsigned *)0x53000000) //Watch-dog timer mode
    #define rWTDAT   (*(volatile unsigned *)0x53000004) //Watch-dog timer data
    #define rWTCNT   (*(volatile unsigned *)0x53000008) //Eatch-dog timer count
    // IIC
    #define rIICCON  (*(volatile unsigned *)0x54000000) //IIC control
    #define rIICSTAT (*(volatile unsigned *)0x54000004) //IIC status
    #define rIICADD  (*(volatile unsigned *)0x54000008) //IIC address
    #define rIICDS   (*(volatile unsigned *)0x5400000c) //IIC data shift
    // IIS
    #define rIISCON  (*(volatile unsigned *)0x55000000) //IIS Control
    #define rIISMOD  (*(volatile unsigned *)0x55000004) //IIS Mode
    #define rIISPSR  (*(volatile unsigned *)0x55000008) //IIS Prescaler
    #define rIISFCON (*(volatile unsigned *)0x5500000c) //IIS FIFO control
    #ifdef __BIG_ENDIAN
    #define IISFIFO  ((volatile unsigned short *)0x55000012) //IIS FIFO entry
    #else //Little Endian
    #define IISFIFO  ((volatile unsigned short *)0x55000010) //IIS FIFO entry
    #endif
    // I/O PORT 
    #define rGPACON    (*(volatile unsigned *)0x56000000) //Port A control
    #define rGPADAT    (*(volatile unsigned *)0x56000004) //Port A data
    #define rGPBCON    (*(volatile unsigned *)0x56000010) //Port B control
    #define rGPBDAT    (*(volatile unsigned *)0x56000014) //Port B data
    #define rGPBUP     (*(volatile unsigned *)0x56000018) //Pull-up control B
    #define rGPCCON    (*(volatile unsigned *)0x56000020) //Port C control
    #define rGPCDAT    (*(volatile unsigned *)0x56000024) //Port C data
    #define rGPCUP     (*(volatile unsigned *)0x56000028) //Pull-up control C
    #define rGPDCON    (*(volatile unsigned *)0x56000030) //Port D control
    #define rGPDDAT    (*(volatile unsigned *)0x56000034) //Port D data
    #define rGPDUP     (*(volatile unsigned *)0x56000038) //Pull-up control D
    #define rGPECON    (*(volatile unsigned *)0x56000040) //Port E control
    #define rGPEDAT    (*(volatile unsigned *)0x56000044) //Port E data