altpll0.tdf

cpld实现的并行数据串行传输收发模块（类曼切斯特码）。最大2M并行码率。

-- megafunction wizard: %ALTPLL%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: altpll 

-- ============================================================
-- File Name: altpll0.tdf
-- Megafunction Name(s):
-- 			altpll
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 5.0 Build 148 04/26/2005 SJ Full Version
-- ************************************************************


--Copyright (C) 1991-2005 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions 
--and other software and tools, and its AMPP partner logic       
--functions, and any output files any of the foregoing           
--(including device programming or simulation files), and any    
--associated documentation or information are expressly subject  
--to the terms and conditions of the Altera Program License      
--Subscription Agreement, Altera MegaCore Function License       
--Agreement, or other applicable license agreement, including,   
--without limitation, that your use is for the sole purpose of   
--programming logic devices manufactured by Altera and sold by   
--Altera or its authorized distributors.  Please refer to the    
--applicable agreement for further details.

INCLUDE "altpll.inc";



SUBDESIGN altpll0
(
	inclk0	 : INPUT = GND;
	pllena	 : INPUT = VCC;
	areset	 : INPUT = GND;
	c0	 : OUTPUT;
	locked	 : OUTPUT;
)

VARIABLE

	altpll_component : altpll WITH (
			CLK0_DUTY_CYCLE = 50,
			LPM_TYPE = "altpll",
			CLK0_MULTIPLY_BY = 4,
			INVALID_LOCK_MULTIPLIER = 5,
			INCLK0_INPUT_FREQUENCY = 50000,
			GATE_LOCK_SIGNAL = "NO",
			CLK0_DIVIDE_BY = 1,
			PLL_TYPE = "FAST",
			VALID_LOCK_MULTIPLIER = 1,
			INTENDED_DEVICE_FAMILY = "Cyclone II",
			OPERATION_MODE = "NORMAL",
			COMPENSATE_CLOCK = "CLK0",
			CLK0_PHASE_SHIFT = "0"
			);

BEGIN

	c0 = altpll_component.clk[0..0];
	locked = altpll_component.locked;
	altpll_component.inclk[0..0] = inclk0;
	altpll_component.inclk[1..1] = GND;
	altpll_component.pllena = pllena;
	altpll_component.areset = areset;
END;



-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: SPREAD_USE STRING "0"
-- Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
-- Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
-- Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
-- Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
-- Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "4"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"
-- Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
-- Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "1"
-- Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "1"
-- Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
-- Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_CUSTOM STRING "0"
-- Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "Any"
-- Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
-- Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
-- Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
-- Retrieval info: PRIVATE: USE_CLK0 STRING "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
-- Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
-- Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "40.000"
-- Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
-- Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
-- Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
-- Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
-- Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "e0"
-- Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
-- Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
-- Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
-- Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
-- Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available"
-- Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "1"
-- Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
-- Retrieval info: PRIVATE: PLL_ENA_CHECK STRING "1"
-- Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "20.000"
-- Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
-- Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.000"
-- Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
-- Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
-- Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
-- Retrieval info: PRIVATE: DEV_FAMILY STRING "Cyclone II"
-- Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
-- Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
-- Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
-- Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
-- Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "4"
-- Retrieval info: CONSTANT: INVALID_LOCK_MULTIPLIER NUMERIC "5"
-- Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "50000"
-- Retrieval info: CONSTANT: GATE_LOCK_SIGNAL STRING "NO"
-- Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "1"
-- Retrieval info: CONSTANT: PLL_TYPE STRING "FAST"
-- Retrieval info: CONSTANT: VALID_LOCK_MULTIPLIER NUMERIC "1"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone II"
-- Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
-- Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
-- Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
-- Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT VCC "c0"
-- Retrieval info: USED_PORT: @clk 0 0 6 0 OUTPUT VCC "@clk[5..0]"
-- Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT GND "inclk0"
-- Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked"
-- Retrieval info: USED_PORT: pllena 0 0 0 0 INPUT VCC "pllena"
-- Retrieval info: USED_PORT: @extclk 0 0 4 0 OUTPUT VCC "@extclk[3..0]"
-- Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset"
-- Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0
-- Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
-- Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
-- Retrieval info: CONNECT: @pllena 0 0 0 0 pllena 0 0 0 0
-- Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
-- Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL altpll0.tdf TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL altpll0.inc TRUE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL altpll0.cmp FALSE FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL altpll0.bsf TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL altpll0_inst.tdf FALSE FALSE