outcallpanel.opt

一整套电梯控制器源程序

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.a*; *.src)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt)
 pExt (*.plm)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (OutCallPanel), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(主程序),1,0,0
GRPOPT 2,(头文件),1,0,0
GRPOPT 3,(初始化),1,0,0
GRPOPT 4,(CAN处理),1,0,0
GRPOPT 5,(数据文件),1,0,0
GRPOPT 6,(5045处理),1,0,0
GRPOPT 7,(定时中断处理),1,0,0
GRPOPT 8,(说明文档),1,0,0

OPTFFF 1,1,1,0,0,9,9,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,176,0,0,0,176,0,0,0,61,3,0,0,54,2,0,0 }
OPTFFF 1,2,1,0,0,209,235,0,<.\display.c><display.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,66,0,0,0,66,0,0,0,205,2,0,0,212,1,0,0 }
OPTFFF 2,3,1,0,0,13,25,0,<.\public.h><public.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,44,0,0,0,44,0,0,0,197,2,0,0,146,1,0,0 }
OPTFFF 2,4,1,0,0,102,109,0,<.\common.h><common.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,154,0,0,0,154,0,0,0,237,2,0,0,32,2,0,0 }
OPTFFF 3,5,1,0,0,82,98,0,<.\init.c><init.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,44,0,0,0,44,0,0,0,219,2,0,0,125,1,0,0 }
OPTFFF 4,6,1,0,0,167,188,0,<.\can.c><can.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,13,0,0,0,17,0,0,0,13,3,0,0,141,1,0,0 }
OPTFFF 5,7,1,0,0,102,107,0,<.\common_data.c><common_data.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,88,0,0,0,88,0,0,0,7,3,0,0,53,1,0,0 }
OPTFFF 6,8,1,0,0,251,265,0,<.\X5045.c><X5045.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,110,0,0,0,110,0,0,0,86,3,0,0,105,1,0,0 }
OPTFFF 7,9,1,0,0,1,14,0,<.\timer.c><timer.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,176,0,0,0,176,0,0,0,7,3,0,0,58,2,0,0 }
OPTFFF 8,10,5,0,0,0,0,0,<.\字库.txt><字库.txt> 


TARGOPT 1, (OutCallPanel)
 CLK51=24000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTLT 1,1,1,0,1,1,0,1,1,1,1
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\ATMEL\DOC0313.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\DOC0509.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p52)(S8051.DLL)()(TP51.DLL)(-p52)
  OPTDBG 509,0,()()()()()()()()()() ()()()()
  OPTBB 0,0,227,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 1,0,24,1,0,0,0,0,0,0,<main.c>()()
  OPTBB 2,0,98,1,0,0,0,0,0,0,<timer.c>()()
  OPTBB 3,0,12,1,0,0,0,0,0,0,<common.h>()()
  OPTBB 4,0,54,1,0,0,0,0,0,0,<timer.c>()()
  OPTBB 5,0,75,1,0,0,0,0,0,0,<timer.c>()()
  OPTBB 6,0,117,1,0,0,0,0,0,0,<main.c>()()
  OPTBB 7,0,27,1,0,0,0,0,0,0,<timer.c>()()
  OPTBB 8,0,112,1,0,0,0,0,0,0,<can.c>()()
  OPTBB 9,0,205,1,0,0,0,0,0,0,<main.c>()()
  OPTBB 10,0,181,1,0,0,0,0,0,0,<main.c>()()
  OPTBB 11,0,20,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 12,0,244,1,0,0,0,0,0,0,<can.c>()()
  OPTBB 13,0,301,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 14,0,296,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 15,0,183,1,0,0,0,0,0,0,<X5045.c>()()
  OPTBB 16,0,447,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 17,0,241,1,0,0,0,0,0,0,<X5045.c>()()
  OPTBB 18,0,82,1,0,0,0,0,0,0,<X5045.c>()()
  OPTBB 19,0,85,1,0,0,0,0,0,0,<init.c>()()
  OPTBB 20,0,182,1,0,0,0,0,0,0,<can.c>()()
  OPTBB 21,0,11,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 22,0,374,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 23,0,162,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 24,0,225,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 25,0,295,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 26,0,121,1,0,0,0,0,0,0,<main.c>()()
  OPTBB 27,0,18,1,0,0,0,0,0,0,<common_data.c>()()
  OPTBB 28,0,75,1,0,0,0,0,0,0,<can.c>()()
  OPTBB 29,0,48,1,0,0,0,0,0,0,<init.c>()()
  OPTBB 30,0,49,1,0,0,0,0,0,0,<init.c>()()
  OPTBB 31,0,109,1,0,0,0,0,0,0,<display.c>()()
  OPTBB 32,0,103,1,0,0,0,0,0,0,<display.c>()()
  OPTDF 0x80
  OPTLE <>
  OPTLC <>
EndOpt