📄 common.lst
字号:
2 =1 ABSACC.H
3 =1
4 =1 Direct access to 8051 memory areas.
5 =1 Copyright (c) 1988-2001 Keil Elektronik GmbH and Keil Software, Inc.
6 =1 All rights reserved.
7 =1 --------------------------------------------------------------------------*/
8 =1
9 =1 #define CBYTE ((unsigned char volatile code *) 0)
10 =1 #define DBYTE ((unsigned char volatile data *) 0)
11 =1 #define PBYTE ((unsigned char volatile pdata *) 0)
12 =1 #define XBYTE ((unsigned char volatile xdata *) 0)
13 =1
14 =1 #define CWORD ((unsigned int volatile code *) 0)
15 =1 #define DWORD ((unsigned int volatile data *) 0)
16 =1 #define PWORD ((unsigned int volatile pdata *) 0)
17 =1 #define XWORD ((unsigned int volatile xdata *) 0)
C51 COMPILER V6.12 COMMON 06/01/2005 16:41:48 PAGE 5
3 #include <intrins.h>
1 =1 /*--------------------------------------------------------------------------
2 =1 INTRINS.H
3 =1
4 =1 Intrinsic functions for C51.
5 =1 Copyright (c) 1988-2001 Keil Elektronik GmbH and Keil Software, Inc.
6 =1 All rights reserved.
7 =1 --------------------------------------------------------------------------*/
8 =1
9 =1 extern void _nop_ (void);
10 =1 extern bit _testbit_ (bit);
11 =1 extern unsigned char _cror_ (unsigned char, unsigned char);
12 =1 extern unsigned int _iror_ (unsigned int, unsigned char);
13 =1 extern unsigned long _lror_ (unsigned long, unsigned char);
14 =1 extern unsigned char _crol_ (unsigned char, unsigned char);
15 =1 extern unsigned int _irol_ (unsigned int, unsigned char);
16 =1 extern unsigned long _lrol_ (unsigned long, unsigned char);
17 =1 extern unsigned char _chkfloat_(float);
4 #include <stdio.h>
1 =1 /*--------------------------------------------------------------------------
2 =1 STDIO.H
3 =1
4 =1 Prototypes for standard I/O functions.
5 =1 Copyright (c) 1988-2001 Keil Elektronik GmbH and Keil Software, Inc.
6 =1 All rights reserved.
7 =1 --------------------------------------------------------------------------*/
8 =1
9 =1 #ifndef EOF
10 =1 #define EOF -1
11 =1 #endif
12 =1
13 =1 #ifndef NULL
14 =1 #define NULL ((void *) 0)
15 =1 #endif
16 =1
17 =1 #ifndef _SIZE_T
18 =1 #define _SIZE_T
19 =1 typedef unsigned int size_t;
20 =1 #endif
21 =1
22 =1 #pragma SAVE
23 =1 #pragma REGPARMS
24 =1 extern char _getkey (void);
25 =1 extern char getchar (void);
26 =1 extern char ungetchar (char);
27 =1 extern char putchar (char);
28 =1 extern int printf (const char *, ...);
29 =1 extern int sprintf (char *, const char *, ...);
30 =1 extern int vprintf (const char *, char *);
31 =1 extern int vsprintf (char *, const char *, char *);
32 =1 extern char *gets (char *, int n);
33 =1 extern int scanf (const char *, ...);
34 =1 extern int sscanf (char *, const char *, ...);
35 =1 extern int puts (const char *);
36 =1
37 =1 #pragma RESTORE
5
6 #define EXTERN extern
7 #define uchar unsigned char
8 #define uint unsigned int
9
10 #define TIMER_FUNC_NUM 60 //功能切换间隔计数 3s
C51 COMPILER V6.12 COMMON 06/01/2005 16:41:48 PAGE 6
11 #define TIMER_SUBFUNC_NUM 4 //子功能切换间隔计数 200ms
12 #define TIMER_FILTER_NUM 2 //开入点滤波计数 100ms
13 #define TIMER_SUBTOPAR_NUM 60 //"子功能切换"转为"功能切换"计数 3s
14 #define TIMER_ONELINE_NUM 3 //滚动时一行的保留时间 150ms
15 #define TIMER_STOP_NUM 40 //到站动作持续时间 2s
16 #define TIMER_200ms 4
17 #define TIMER_400ms 8
18 #define TIMER_1000ms 20
19
20 //以前用8255
21 #define PA377 XBYTE[((P2&0x60)|0x9e)*256+P0]
22 #define PB377 XBYTE[((P2&0x60)|0x9d)*256+P0]
23 #define PC377 XBYTE[((P2&0x60)|0x9b)*256+P0]
24 #define PD377 XBYTE[((P2&0x60)|0x97)*256+P0]
25
26 #define FLOOR_DISP_BYTENUM 7 // 显示楼层缓冲区对应字节数
27 #define DIRECT_DISP_BYTENUM 7 // 显示楼层缓冲区对应字节数
28 //----------------------------------5045用----------------------------------------//
29 struct data5
30 {uchar cF0;//设定F0，设定控制器号(0~7), 显示(1-8)
31 uchar cF1;//设定F1, 设定层楼数(0~47), 显示(1-48)
32 uchar cF2;//设定F2, 设定显示方式(0~2), 显示(1-3)
33 uchar cF3;//设定F3, 设定锁梯(0~1), 显示(0-1)
34 uchar cF4;//设定F4, 设定消防(0~1), 显示(0-1)
35 };
36 #define DATA5 struct data5
37
38 EXTERN DATA5 data5045;
39
40 sbit SO=P3^4; //5045输出
41 sbit SI=P3^2; //5045输入
42 sbit SCK=P3^3; //5045时钟
43 sbit CS=P3^5; //5045片选
44
45 EXTERN uchar code WREN_INST; // Write enable latch instruction (WREN)
46 EXTERN uchar code WRDI_INST; // Write disable latch instruction (WRDI)
47 EXTERN uchar code WRSR_INST; // Write status register instruction (WRSR)
48 EXTERN uchar code RDSR_INST; // Read status register instruction (RDSR)
49
50 //写入25045的先导字,应当为0000A010,其中的A为写入25045的高位地址
51 //将此WRITE_INST和写入高位地址相或后即为正确的写先导字
52 EXTERN uchar code WRITE_INST; // Write memory instruction (WRITE)
53
54 //读出25045的先导字,应当为0000A011,其中的A为读出25045的高位地址
55 //将此READ_INST和读出高位地址相或后即为正确的读先导字
56 EXTERN uchar code READ_INST; // Read memory instruction (READ)
57
58 EXTERN uint code BYTE_ADDR; // Memory address for byte mode operations
59 EXTERN uchar code BYTE_DATA; // Data byte for byte write operation
60 EXTERN uint code PAGE_ADDR; // Memory address for page mode operations 页面写入的其始地址
61 EXTERN uchar code PAGE_DATA1; // 1st data byte for page write operation
62 EXTERN uchar code PAGE_DATA2; // 2nd data byte for page write operation
63 EXTERN uchar code PAGE_DATA3; // 3rd data byte for page write operation
64
65 //这是状态寄存器的值,他的意义在于第5,第4位为WDI1,WDI0代表DOG的时间,00为1.4秒,01为600毫秒,10为200毫秒,00为d
-isabled
66 //第3位和第2位为BL1,BL0,是写保护设置位,00为无保护,01为保护180-1FF,10为保护100-1FF,11为保护000-1FF.第1位为W
-EL,
67 //当他为1时代表已经"写使能"设置了,现在可以写了,只读位.第0位为WIP,当他为1时代表正在进行写操作,是只读
68 EXTERN uchar code STATUS_REG; // Status register,设置DOG时间设置为200毫秒,无写保护
69
70 EXTERN uchar code MAX_POLL; // Maximum number of polls(最大写过程时间,确定25045的最大的写入过程的时间
C51 COMPILER V6.12 COMMON 06/01/2005 16:41:48 PAGE 7
-)
71 EXTERN uchar code INIT_STATE; // Initialization value for control ports
72 EXTERN uint code SLIC; // Address location of SLIC
73 EXTERN uchar m_set5045flg; // 当设置位为1时，表示前面设置过，此时要重新的写入5045中。 如果没有，则不需要
-进行这个步骤。
74
75 //----------------------------------can用----------------------------------//
76 EXTERN uchar code cCtrlNum[8]; //控制器号的转换
77 EXTERN uchar whacr0,whacr1; //sja1000代码(接收标示符)
78 EXTERN uchar whid1,whid2; //sja1000代码(发送标示符)
79 struct rec_data{
80 uchar cCurFloor; //当前楼层数
81 uchar cDirect; //当前方向(0:下 1:上 0xFF:无)
82 uchar cMaxFloor; //最大楼层数
83 };
84 #define REC_DATA struct rec_data
85 EXTERN REC_DATA m_RecData; //can接收数据
86 EXTERN bdata uchar abit;
87 EXTERN bit abit_0;
88 EXTERN bit abit_1;
89 EXTERN bit abit_2;
90 EXTERN bit abit_3;
91 EXTERN bit abit_4;
92 EXTERN bit abit_5;
93 EXTERN bit abit_6;
94 EXTERN bit abit_7;
95 EXTERN uchar time1_count; //上呼计数
96 EXTERN uchar time2_count; //下呼计数
97 EXTERN uchar time3_count; //锁梯计数
98 EXTERN uchar time4_count; //消防计数
99 EXTERN uchar time5_count; //消防返回计数
100 EXTERN uchar time6_count; //锁梯消防有效时定时发送计数
101 EXTERN uchar time7_count; //
102 EXTERN bit time1_flg; //上呼计数
103 EXTERN bit time2_flg; //下呼计数
104 EXTERN bit time3_flg; //消防计数
105 EXTERN bit time4_flg; //消防返回计数
106 EXTERN bit time5_flg; //锁梯计数
107 EXTERN bit time6_flg; //锁梯消防有效时定时发送标记
108 EXTERN bit time7_flg; //
109 EXTERN bit m_existupcallflg;//上呼存在标记
110 EXTERN bit m_existdowncallflg;//下呼存在标记
111 EXTERN uchar time_nocan_count;
112 EXTERN bit time_nocan_flg; //
113
114 //----------------------------------显示用----------------------------------//
115 /*struct disp_data{
116 uchar cHigh; //当前楼层数
117 uchar cLow; //当前方向(0:下 1:上 0xFF:无)
118
119 };
120 #define DISP_DATA struct disp_data*/
121 //EXTERN DISP_DATA m_dSrcFloor[FLOOR_DISP_BYTENUM]; //源楼层buffer
122 EXTERN uchar m_cSrcFloorHigh[FLOOR_DISP_BYTENUM]; //源楼层buffer高字符
123 EXTERN uchar m_cSrcFloorLow[FLOOR_DISP_BYTENUM]; //源楼层buffer低字符
124 //EXTERN uchar m_cSrcDirect[DIRECT_DISP_BYTENUM]; //源方向buffer
125 //EXTERN DISP_DATA m_dDispFloor[FLOOR_DISP_BYTENUM]; //显示楼层buffer
126 EXTERN uchar m_cDispFloorHigh[FLOOR_DISP_BYTENUM]; //显示楼层buffer高字符
127 EXTERN uchar m_cDispFloorLow[FLOOR_DISP_BYTENUM]; //显示楼层buffer低字符
128 EXTERN uchar m_cDispDirect[DIRECT_DISP_BYTENUM]; //显示方向buffer
129
130 //EXTERN uchar code PB[][5];
C51 COMPILER V6.12 COMMON 06/01/2005 16:41:48 PAGE 8
131 //EXTERN uchar code PDUp[5];
132 //EXTERN uchar code PDDown[5];
133 EXTERN uchar code PR[13][7];
134 EXTERN uchar code PRDUp[7];
135 EXTERN uchar code PRDDown[7];
136 EXTERN uchar code PR_FIRE[7][2];
137 EXTERN uchar code PR_REPAIRE[7][2];
138 EXTERN uchar code PR_LOCK[7][2];
139 //EXTERN uchar m_cMakeNewFlg; //新文字做标记
140 EXTERN uchar m_c7_11singledoubleFlg; //0:单字 1:双字
141
142 //----------------------------------设置功能用----------------------------------//
143 EXTERN uchar m_cFuncCnt; //F0-F4标记计数(0-4)
144 EXTERN uchar m_cFuncTimer; //功能切换计数器(每2秒切换一次)
145 EXTERN uchar m_cSettingFuncFlg; //功能设置标记(标志当前处于F0-F4切换阶段)
146 EXTERN uchar m_cNewFuncFlg;
147 // 显示为(F0:1-8 F1:1-48 F2:1-3 F3:0-1 F4:0-1)
148 EXTERN uchar m_cSubFuncCnt; //各功能计数(F0:0-7 F1:0-47 F2:0-2 F3:0-1 F4:0-1)
-
149 EXTERN uchar m_cSubFuncTimer; //功能切换计数器(每500毫秒切换一次)
150 EXTERN uchar m_cSettingSubFuncFlg; //子功能设置标记(标志当前处于各功能的子功能设置阶段
-)
151 EXTERN uchar m_cNewSubFuncFlg;
152 EXTERN uchar m_cMaxSubNum;
153
154 EXTERN uchar m_cSubToParTimer;
155 EXTERN uchar m_cSubToParLess2sFlg;
156
157 //滚动专用
158 EXTERN uchar m_cWholeMoveOKFlg; //整组移动完成标记(出现新楼层时,进行一组滚动,滚动完成后等待下一新⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -