serial.opt

基于STC89C58的串口测试程序

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (串口程序), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(源文件),1,0,0
GRPOPT 2,(头文件),1,0,0

OPTFFF 1,1,2,0,0,83,92,0,<.\STARTUP.A51><STARTUP.A51> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,225,255,255,255,88,0,0,0,120,0,0,0,127,3,0,0,87,2,0,0 }
OPTFFF 1,2,1,1694498818,0,1,18,0,<.\ser.C><ser.C> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,225,255,255,255,0,0,0,0,0,0,0,0,146,3,0,0,234,1,0,0 }
OPTFFF 2,3,5,0,0,197,197,0,<.\STC89C58.h><STC89C58.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,225,255,255,255,110,0,0,0,145,0,0,0,18,4,0,0,120,2,0,0 }

ExtF <.\STC89C58.h> 197,197,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,225,255,255,255,110,0,0,0,145,0,0,0,18,4,0,0,120,2,0,0 }

TARGOPT 1, (串口程序)
 CLK51=33000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\LST\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 1,(Data Sheet)<DATASHTS\ATMEL\AT89C51XD2_DS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\AT_C51ISM.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-pATRD2)(S8051.DLL)()(TP51.DLL)(-pATRD2)
  OPTDBG 44029,0,()()()()()()()()()() ()()()()
  OPTKEY 0,(DLGDP51)((98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=-1,-1,-1,-1,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(5009=-1,-1,-1,-1,0)(5010=-1,-1,-1,-1,0)(5055=677,196,880,512,0)(91=-1,-1,-1,-1,0)(92=679,483,879,733,0)(94=-1,-1,-1,-1,0)(95=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(5008=-1,-1,-1,-1,0)(5057=-1,-1,-1,-1,0)(5003=-1,-1,-1,-1,0)(5061=-1,-1,-1,-1,0)(5054=-1,-1,-1,-1,0))
  OPTDF 0x96
  OPTLE <>
  OPTLC <>
EndOpt