count60.fit

数字钟是采用数字电路实现“时”、“分”、“秒”数字显示的计时装置。由于数字集成电路的发展和石英晶体震荡器的使用

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 10/28/2008 20:39:16      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "count60"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "CLK"                          : INPUT_PIN  = 1      ;
    "CLR"                          : INPUT_PIN  = 2      ;
    "EN"                           : INPUT_PIN  = 42     ;
    "CO"                           : OUTPUT_PIN = 60     ;
    "QH0"                          : OUTPUT_PIN = 30     ;
    "QH1"                          : OUTPUT_PIN = 59     ;
    "QH2"                          : OUTPUT_PIN = 27     ;
    "QH3"                          : OUTPUT_PIN = 80     ;
    "QL0"                          : OUTPUT_PIN = 61     ;
    "QL1"                          : OUTPUT_PIN = 62     ;
    "QL2"                          : OUTPUT_PIN = 58     ;
    "QL3"                          : OUTPUT_PIN = 29     ;
    ":13"                          : LOCATION   = LC4_C23;
    "|74160:1|:6"                  : LOCATION   = LC2_C14;  -- |74160:1|QA
    "|74160:1|:7"                  : LOCATION   = LC1_C14;  -- |74160:1|QB
    "|74160:1|:8"                  : LOCATION   = LC6_C14;  -- |74160:1|QC
    "|74160:1|:9"                  : LOCATION   = LC5_C14;  -- |74160:1|QD
    "|74160:1|:25"                 : LOCATION   = LC3_C14;
    "|74160:1|:45"                 : LOCATION   = LC2_C23;  -- |74160:1|RCO
    "|74160:1|:46"                 : LOCATION   = LC4_C14;
    "|74160:1|:65"                 : LOCATION   = LC7_C14;
    "|74160:2|:6"                  : LOCATION   = LC7_C23;  -- |74160:2|QA
    "|74160:2|:7"                  : LOCATION   = LC5_C23;  -- |74160:2|QB
    "|74160:2|:8"                  : LOCATION   = LC1_C23;  -- |74160:2|QC
    "|74160:2|:9"                  : LOCATION   = LC3_C23;  -- |74160:2|QD
    "|74160:2|~25~1"               : LOCATION   = LC6_C23;

END;

INTERNAL_INFO "count60"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC2_C14,->LC1_C14,->LC6_C14,->LC5_C14,->LC7_C23,->LC5_C23,->LC1_C23,->LC3_C23|";
    OD1P2   : LORAX = "1:FB1->LC2_C14,->LC1_C14,->LC6_C14,->LC5_C14,->LC7_C23,->LC5_C23,->LC1_C23,->LC3_C23|";
    OD3P42  : LORAX = "1:FB3|2:FH3R2,PA5R2C13->LC2_C14,->LC3_C14,->LC7_C14||";
    LC4_C23 : LORAX = "1:MSW3R2C22|2:HHR7R2,PA15R2C13->LC2_C14,->LC1_C14,->LC6_C14,->LC5_C14,->LC3_C14|,2:G31R2->OH3R2P60||";
    LC2_C14 : LORAX = "1:MSW2R2C12|2:HHR3R2,PA19R2C22->LC4_C23|,2:G17R2->OH2R2P61||";
    LC1_C14 : LORAX = "1:MSW0R2C13,HHR23R2->OH0R2P62|";
    LC6_C14 : LORAX = "1:MSW6R2C12,G79R2->OH6R2P58|";
    LC5_C14 : LORAX = "1:MSW4R2C13|2:G93R2->OH12R2P29|,2:HHR36R2,PA20R2C22->LC4_C23,->LC2_C23||";
    LC7_C14 : LORAX = "1:MSW6R2C13,HHR32R2,PA15R2C22->LC2_C23|";
    LC7_C23 : LORAX = "1:MSW6R2C22,G82R2->OH14R2P30|";
    LC5_C23 : LORAX = "1:MSW4R2C23,HHR30R2->OH4R2P59|";
    LC1_C23 : LORAX = "1:MSW0R2C22,G46R2->OH8R2P27|";
    LC3_C23 : LORAX = "1:MSW2R2C22,V8C22->OV0C22P80|";
	LC4_C23 : LORAX2 = "LC1_C23, LC7_C23, LC5_C14, LC2_C14";
	LC2_C14 : LORAX2 = "X, OD3P42, LC4_C23, LC2_C14";
	LC1_C14 : LORAX2 = "LC1_C14, LC7_C14, LC4_C23, LC5_C14";
	LC6_C14 : LORAX2 = "X, LC6_C14, LC3_C14, LC4_C23";
	LC5_C14 : LORAX2 = "LC7_C14, LC4_C14, LC4_C23, LC5_C14";
	LC3_C14 : LORAX2 = "LC1_C14, OD3P42, LC2_C14, LC4_C23";
	LC2_C23 : LORAX2 = "X, X, LC7_C14, LC5_C14";
	LC4_C14 : LORAX2 = "X, X, LC6_C14, LC3_C14";
	LC7_C14 : LORAX2 = "X, X, OD3P42, LC2_C14";
	LC7_C23 : LORAX2 = "X, LC2_C23, LC4_C23, LC7_C23";
	LC5_C23 : LORAX2 = "LC3_C23, LC5_C23, LC6_C23, LC4_C23";
	LC1_C23 : LORAX2 = "LC5_C23, LC6_C23, LC1_C23, LC4_C23";
	LC3_C23 : LORAX2 = "LC3_C23, LC2_C23, LC4_C23, LC7_C23";
	LC6_C23 : LORAX2 = "X, LC2_C23, LC7_C23, LC4_C23";
END;