rc632cmd.h

很强的射频卡reader源代码

/****************************************************************************
*                                                                           
* File:         RC500CMD.H(HEADER for RC500 SYSTEM COMMAND AND ADDED ROUTINE)                                   
*                                                                           
* Created:      2002.12.25                                                    
*                                                                           
* Editor        JOHN CHENG
*                                                                           
* Compiler:     KEIL C51 V7.00                                              
*                                                                           
* Description:                 
*                                                                           
*****************************************************************************
*                                                                           
* Version | Date     |  PCB  | Description                                          
* --------+----------+-------+------------------------------------------------ 
* V100    | 25/12/02 |       | Initial version,TypeA and TypeB 
* V110    | 15/01/03 |       | reset pin control by FIFO out pins.Adding two new command
*         |          |       | (READ EEPROM C6 and WRITE EEPROM C7).
*         |          |       | delay using a fixed time,not "for loop".
*         |          |       | New routine funtions is generated in main funtion.
* V120    | 20/01/03 |       | Modify reader.h,adding rc500cmd.h            
* V130    | 08/02/03 |       | Adding some funtions about SAM
*         |          |       |                                            
****************************************************************************/

//Below define is ISO14443 TYPEA  command code(0x30-0x3F)
#define CMD_MF_Request    	0x30	  //MRC500 request
#define CMD_MF_Anticoll   	0x31	  //MRC500 anticol
#define CMD_MF_Select     	0x32	  //MRC500 select
#define CMD_MF_Halt       	0x33	  //MRC500 halt
#define CMD_SLE_Gen         0x34      //Send generic command to tag card
#define CMD_MF_PowerDown    0x35	  //MRC500 PowerDown
#define CMD_MF_PowerWake    0x36	  //MRC500 Wake PowerDown

#define CMD_MF_Anticoll2   	0x38	  //MRC500 anticol2
#define CMD_MF_Select2     	0x39	  //MRC500 select2
#define CMD_MF_Anticoll3   	0x3a	  //MRC500 anticol3
#define CMD_MF_Select3     	0x3b	  //MRC500 select3
//---------------------------------------------------------------------------------------------------------
//Below define is Mifare chip command code(0x40-0x4F)
#define CMD_MF_Authentication	0x40	//MRC500 authentication           
#define CMD_MF_Read       		0x41	//MRC500 read a block
#define CMD_MF_Write      		0x42	//MRC500 write a block
#define CMD_MF_Transfer   		0x43	//MRC500 transfer
#define CMD_MF_Value      		0x44	//Value block operation:increment,decrement,restore
#define CMD_MF_LOADKEY    		0x45	//load provided keys
#define CMD_MF_LOADEEKEY  		0x46	//load key from MRC500 EEPROM
#define CMD_MF_LOADKEY2EE 		0x47	//load key to MRC500 EEPROM
//---------------------------------------------------------------------------------------------------------
//Below define is ISO14443-B  command code(0x60-0x6F)
#define CMD_RequestB	    0x60
#define CMD_AnticollB	    0x61
#define CMD_Attrib		    0x62
#define CMD_HaltB		 	0x63					
#define	CMD_SetTYPEB		0x64	
#define CMD_Generic_B       0x65
#define CMD_FoundCards		0x66
//---------------------------------------------------------------------------------------------------------
//-------------------------------------------------------------------------------------------------
//Below define is ISO15693  command code(0x70-0x7F)
//-------------------------------------------------------------------------------------------------
#define CMD_ISO15693_Inventory    				  0x70
#define CMD_ISO15693_Stay_Quiet    				  0x71	  //MRC632 15693 make the tag quiet state 
#define CMD_ISO15693_Read    					  0x72	  //MRC632 15693 read single block
#define CMD_ISO15693_Write   					  0x73	  //MRC632 15693 write single block 
#define CMD_ISO15693_Lock_Block    				  0x74	  //MRC632 15693 lock block 
#define CMD_ISO15693_Select	    				  0x75
#define CMD_ISO15693_Reset_To_Ready    			  0x76
#define CMD_ISO15693_Write_AFI    				  0x77
#define CMD_ISO15693_Lock_AFI    				  0x78
#define CMD_ISO15693_Write_DSFID    			  0x79
#define CMD_ISO15693_Lock_DSFID    				  0x7A
#define CMD_ISO15693_Get_System_Information    	  0x7B	  //MRC632 Get the card's information
#define CMD_ISO15693_Get_Multiple_Block_Security  0x7C	  //MRC632 Get the card's Multiple block information
#define CMD_ISO15693_Generic					  0x7D


#define CMD_DES_get_uid							  0x80
#define CMD_DES_read							  0x81


#define CMD_DES_savekey							  0x86
#define CMD_DES_setpara							  0x87
#define CMD_DES_selkey							  0x88
#define CMD_DES_getkey							  0x89
//-----------------------------------------------------------------------------------------------------
//Below define is High Level MIFARE command code(0x90-0x9F) 
//----- Customer Command - High Level MIFARE CMDs Testing Purpose Only  ------------------
#define CMD_MF_HLRead       	0x90
#define CMD_MF_HLWrite	    	0x91
#define CMD_MF_HLInitVal	    0x92
#define CMD_MF_HLDecrement	    0x93
#define CMD_MF_HLIncrement	    0x94 

#define CMD_HL_Request			0x98
//---------------------------------------------------------------------------------------------------------
//Below define is Miscellaneous command code(0xC0-0xCF)
#define  CMD_RF             	0xC0    //Control RF field
#define  CMD_MF_RF_ExInternal	0xC1	//Select RF external or internal
#define  CMD_MF_RW_ConfigReg	0xC2	//for debug MRC500 configer register
#define  CMD_MF_VerifiedWrite   0xC3
#define  CMD_Authentication     0xC4    //Authentication of reader and card
//#define  CMD_Antenna           0xC5   //Selected Antenna 1 or 2 and read current antenna status
#define  CMD_ReadE2             0xC6    //READ RC500 EEPROM
#define  CMD_WriteE2  			0xC7    //WRITE RC500 EEPROM
//--------------------------------------------------------------------------------------------------------
/**********************************************************************************************************
//  COMMAND SET
/*********************************************************************************************************/
//Below define is System command code(0x00-0x1F)
#define  CMD_SetAddress     0x06      //Set reader address     
#define  CMD_SetBaudrate    0x07      //Set reader baudrate     
#define  CMD_SetSerialNum   0x08      //Set reader serial number
#define  CMD_GetSerialNum   0x09      //Get reader serial number     
#define  CMD_GetVersionNum  0x0A      //Get reader version number      
#define	 CMD_Set_User_Info	0x0B	  //Set User Information
#define	 CMD_Get_User_Info	0x0c	  //Get User Information
#define  CMD_LoadProgram    0x11	  //for download program
#define  CMD_Weigand		0x12	  //start Weigand26	
#define  CMD_WeigandActive	0x13	  // active Wiegand mode

#define	 CMD_Lcd_Display	0x14	  // LCD显示命令
#define  CMD_Lcd_Manufacturer 0x16	  //第一行厂商信息