rilhand_older.cpp

windows mobile RIL软件

    res.dwReadyState = g_dwReadyState;
    pnd = new CNotificationData;
    if (pnd && pnd->InitFromRealBlob(RIL_NOTIFY_RADIOEQUIPMENTSTATECHANGED, (void *) &res, res.cbSize))
    {
        // Note that BroadcastNotification frees pnd
        BroadcastNotification(pnd);
        pnd = NULL;
    }

    delete pnd;
/* Below was added for TTPCOM to insure that the status indicators were correct
   following boot up
*/
#if defined(OEM2_DRIVER)

    pnd = new CNotificationData;
    if (pnd && pnd->InitFromRealBlob(RIL_NOTIFY_REGSTATUSCHANGED, (void *) &g_dwRegStatus, sizeof(g_dwRegStatus)))
    {
        // Note that BroadcastNotification frees pnd
        BroadcastNotification(pnd);
        pnd = NULL;
    }

    delete pnd;
#endif

}

//
// Thread responsible for sending commands from the Command Queue to COM port
//
DWORD WINAPI SimReadyThreadProc(LPVOID lpParameter)
{
    FUNCTION_TRACE(SimReadyThreadProc);
    DEBUGCHK(lpParameter != NULL);
    CRilHandle* pRilDevice = (CRilHandle*)lpParameter;
    DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : SimReadyThreadProc : Entering, pRilDevice=0x%x\r\n"),pRilDevice));
    const DWORD dwReturn = pRilDevice->SimReadyThread();
    DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : SimReadyThreadProc : THREAD IS EXITING, dwReturn=0x%x\r\n"),dwReturn));
    return dwReturn;
}

//
// Loop until RIL is ready to process SIM commands
//
DWORD CRilHandle::SimReadyThread()
{
    CCommand *pCmd = NULL;
    APIINFO apiiInfo;
    const APIID apiid = APIID_GETPHONELOCKEDSTATE;

    // Create an event
    m_fSimReady = FALSE;
    m_hSimReadyEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
    if (!m_hSimReadyEvent)
    {
        goto Error;
    }

    // Get the info about this API
    memset(&apiiInfo,0,sizeof(apiiInfo));
    GetAPIInfo(apiid, apiiInfo);

    // Query for the PIN until we don't get back 515 as an error
    do
    {
        DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : SimReadyThread : Sending SIM Query Command...\r\n")));

        // Set up a CPIN command to be sent
        // Note that we don't care what the return value is, so long as it's not that the radio isn't ready
        pCmd = new CCommand;

//Alan Luo : try to fix sim card bug
 #if defined(WAVECOM_DRIVER) || defined(PHILIP_DRIVER) 
        if (!pCmd || !pCmd->Init(NULL, "AT+CPIN?\r", NULL, CMDOPT_SIMQUERY, apiiInfo.dwExecTime, apiiInfo.dwTimeout, NULL, NULL, 0, 0, 0, apiid, NULL, NULL))
 #else
        if (!pCmd || !pCmd->Init(NULL, "AT+CPIN?\r", NULL, CMDOPT_SIMQUERY, apiiInfo.dwExecTime, apiiInfo.dwTimeout, NULL, ParseGetPhoneLockedState, 0, 0, 0, apiid, NULL, NULL))
 #endif
        {
            DEBUGMSG(ZONE_ERROR, (TEXT("RILDrv : E : SimReadyThread : Unable to construct or Init CCommand\r\n")));
            goto SimReadyPhase2;
        }

        // Place the command into the command queue
        //    (this may block if the queue is full)
        if (!g_pCmdQ->Put(pCmd, INFINITE))
        {
            goto SimReadyPhase2;
        }

        // Now, block until we get a response back
        WaitForSingleObject(m_hSimReadyEvent, apiiInfo.dwTimeout);

        // Sleep a bit before the next try
        if (!m_fSimReady && !m_fQuitReadyStateThread)
        {
            Sleep(2000);
        }
    }
    while (!m_fSimReady && !m_fQuitReadyStateThread);

    if (m_fQuitReadyStateThread)
    {
        goto Error;
    }

SimReadyPhase2:

#if defined(OEM2_DRIVER) || defined (EMP_DRIVER) || defined(PHILIP_DRIVER) 
    NKDbgPrintfW(_T("SimReadyPhase2\r\n"));
    // Create the needed event
    m_fInitedForSMS = FALSE;
    m_hInitedForSMSEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
    if (!m_hInitedForSMSEvent)
    {
        goto Error;
    }

    // for OEM2 platforms the measure of SMS readiness is a successful CNMI initialization
    do
    {
        Sleep(10000); //retry every 10s

        if (g_dwReadyState & RIL_READYSTATE_UNLOCKED)
        {
            DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : SMSReadyThread : OEM2 Sending CNMI Init Command...\r\n")));

            pCmd = new CCommand;
#ifdef RIL_CELL_BROADCAST


#if defined(PHILIP_DRIVER) 
            if (!pCmd || !pCmd->Init(NULL, "AT+CNMI=2,5,2,1,0\r", NULL, CMDOPT_SMSINIT | CMDOPT_IGNORERSP, EXECTIME_API_DEFAULT, g_TimeoutCmdInit, NULL, NULL, 0, 0, 0, APIID_NONE, NULL, NULL))
#else
            if (!pCmd || !pCmd->Init(NULL, "AT+CNMI=2,2,2,1,0\r", NULL, CMDOPT_SMSINIT | CMDOPT_IGNORERSP, EXECTIME_API_DEFAULT, g_TimeoutCmdInit, NULL, NULL, 0, 0, 0, APIID_NONE, NULL, NULL))
#endif
#else
            if (!pCmd || !pCmd->Init(NULL, "AT+CNMI=2,2,0,1,0\r", NULL, CMDOPT_SMSINIT | CMDOPT_IGNORERSP, EXECTIME_API_DEFAULT, g_TimeoutCmdInit, NULL, NULL, 0, 0, 0, APIID_NONE, NULL, NULL))
#endif
            {
                DEBUGMSG(ZONE_ERROR, (TEXT("RILDrv : E : SMSReadyThread : Unable to construct or Init CCommand\r\n")));
                goto SimReadyPhase3;
            }

            // Place the command into the command queue
            //    (this may block if the queue is full)
            if (!g_pCmdQ->Put(pCmd, INFINITE))
            {
                goto SimReadyPhase3;
            }

            // Now, block until we get a response back
            WaitForSingleObject(m_hInitedForSMSEvent, g_TimeoutCmdInit);
        }
    }
    while (!m_fInitedForSMS && !m_fQuitReadyStateThread);

    if (m_fQuitReadyStateThread)
    {
        goto Error;
    }

    SendReadyStateNotification(RIL_READYSTATE_SMS);


SimReadyPhase3:
//Alan Luo: try to fix sim card ready bug
NKDbgPrintfW(_T("SimReadyPhase3\r\n"));
#if defined(OEM2_SIMTOOLKIT)
    pCmd = new CCommand;

    if (!pCmd || !pCmd->Init(NULL, "AT+STPD=12,0901FF7F602000106200000F\r", NULL, CMDOPT_IGNORERSP, EXECTIME_API_DEFAULT, g_TimeoutCmdInit, NULL, NULL, 0, 0, 0, APIID_NONE, NULL, NULL))
    {
        DEBUGMSG(ZONE_ERROR, (TEXT("RILDrv : E : SIMReadyThread : Unable to create SIMTK cmnd\r\n")));
        goto Error;
    }
    else
    {
        if (!g_pCmdQ->Put(pCmd, INFINITE))
        {
            goto Error;
        }
    }
#endif

    // Create the needed event
    m_fInitedForSIMPB = FALSE;
    m_dwSIMPBLastSize = (DWORD)-1;
    m_hInitedForSIMPBEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
    if (!m_hInitedForSIMPBEvent)
    {
        goto Error;
    }

    // This now only applies to OEM2 with new CSTAT command from OEM1
    //now perform SIM phonebook ready check for OEM2 driver
    //OEM2 driver does not support a SIM PB ready notification,
    //and will simply fail read attempts for SIM PB entries that have not
    //yet been copied from non-volatile SIM memory to volatile SIM memory.
    //so for those platforms we'll poll every 10 seconds to see whether or not the number of
    //SIM entries has stabilized to a steady state, at which point we'll
    //call the SIM PB ready.

    DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : SIMPBReadyThread : OEM2 Sending select SIMPB Command...\r\n")));

    pCmd = new CCommand;
    if (!pCmd || !pCmd->Init(NULL, "AT+CPBS=\"SM\"\r", NULL,  CMDOPT_IGNORERSP, EXECTIME_API_DEFAULT, g_TimeoutCmdInit, NULL, NULL, 0, 0, 0, APIID_NONE, NULL, NULL))
    {
        DEBUGMSG(ZONE_ERROR, (TEXT("RILDrv : E : SIMPBReadyThread : Unable to construct or Init CCommand\r\n")));
        goto Error;
    }

    // Place the command into the command queue
    //    (this may block if the queue is full)
    if (!g_pCmdQ->Put(pCmd, INFINITE))
    {
        goto Error;
    }

    do
    {
        if (g_dwReadyState & RIL_READYSTATE_UNLOCKED)
        {
            DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : SIMPBReadyThread : OEM2 Sending SIMPB size query Command...\r\n")));

            pCmd = new CCommand;
            if (!pCmd || !pCmd->Init(NULL, "AT+CPBS?\r", NULL, CMDOPT_SIMPBINIT | CMDOPT_IGNORERSP, EXECTIME_API_DEFAULT, g_TimeoutCmdInit, NULL, NULL, 0, 0, 0, APIID_NONE, NULL, NULL))
            {
                DEBUGMSG(ZONE_ERROR, (TEXT("RILDrv : E : SIMPBReadyThread : Unable to construct or Init CCommand\r\n")));
                goto Error;
            }

            // Place the command into the command queue
            //    (this may block if the queue is full)
            if (!g_pCmdQ->Put(pCmd, INFINITE))
            {
                goto Error;
            }

            // Now, block until we get a response back
            WaitForSingleObject(m_hInitedForSIMPBEvent, g_TimeoutCmdInit);
        }

        if (!m_fInitedForSIMPB && !m_fQuitReadyStateThread)
        {
            Sleep(10000); //retry every 10s
        }
    }
    while (!m_fInitedForSIMPB && !m_fQuitReadyStateThread);

    if (m_fQuitReadyStateThread)
    {
        goto Error;
    }

    SendReadyStateNotification(RIL_READYSTATE_SIM_PB);
#endif

    /* these could take a while to execute */
    /* so do these last in this function   */
#if defined(OEM2_DRIVER) || defined(EMP_DRIVER)
    /* read PLMN Name from CPHS or EF-PNN*/
    StartPlmnNameRead();
#ifdef RIL_ENABLE_EONS
    /* read EONS */
    StartEONSRead();
#endif
#endif

Error:
    if (m_hSimReadyEvent)
    {
        CloseHandle(m_hSimReadyEvent);
        m_hSimReadyEvent = NULL;
    }
    if (m_hInitedForSMSEvent)
    {
        CloseHandle(m_hInitedForSMSEvent);
        m_hInitedForSMSEvent = NULL;
    }
    if (m_hInitedForSIMPBEvent)
    {
        CloseHandle(m_hInitedForSIMPBEvent);
        m_hInitedForSIMPBEvent = NULL;
    }

    return 0;
}

//
// Launch a thread to see if the SIM is ready or not
//
void CRilHandle::StartReadyStateQuery()
{
    m_fQuitReadyStateThread = FALSE;
    HANDLE hThread = CreateThread(NULL, 0, SimReadyThreadProc, (LPVOID)this, 0, NULL);
    if (NULL != hThread)
        CloseHandle(hThread);   // close handle we don't need
}

void CRilHandle::StopReadyStateQuery()
{
    m_fQuitReadyStateThread = TRUE;
    if (m_hSimReadyEvent)
    {
        SetEvent(m_hSimReadyEvent);
    }
    if (m_hInitedForSMSEvent)
    {
        SetEvent(m_hInitedForSMSEvent);
    }
    if (m_hInitedForSIMPBEvent)
    {
        SetEvent(m_hInitedForSIMPBEvent);
    }
}

//
// Start initialization
//
BOOL CRilHandle::StartInit()
{
    // // FUNCTION_TRACE(CRilHandle::StartInit);

    SYNCBLOCK(m_cs);

    DWORD dwTemp;
    BOOL fRet = FALSE;

	NKDbgPrintfW(TEXT("RILDrv : t : CRilHandle::StartInit\r\n"));

    if (m_fInited)
    {
        fRet = TRUE;
        goto Error;
    }

    // Read parameters from the registry
    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("DataModeCmdDelay"), &dwTemp))
    {
        m_dwDataModeCmdDelay = dwTemp;
    }
    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("MaxDataModeTimeWithoutCmd"), &dwTemp))
    {
        m_dwMaxDataModeTimeWithoutCmd = dwTemp;
    }

    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("LastCLIP"), &dwTemp))
    {
        g_dwLastCLIP = dwTemp;
        DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : CRilHandle::StartInit : Retrieved LastCLIP=0x%x\r\n"),g_dwLastCLIP));
    }
    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("LastCLIR"), &dwTemp))
    {
        g_dwLastCLIR = dwTemp;
        DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : CRilHandle::StartInit : Retrieved LastCLIR=0x%x\r\n"),g_dwLastCLIR));
    }

    g_TimeoutCmdInit = TIMEOUT_CMD_INIT;
    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("TimeoutCmdInit"), &dwTemp))
    {
        g_TimeoutCmdInit = dwTemp;
    }

    g_TimeoutCmdNoOp = TIMEOUT_CMD_NOOP;
    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("TimeoutCmdNoOp"), &dwTemp))
    {
        g_TimeoutCmdNoOp = dwTemp;
    }

    g_TimeoutCmdOnline = TIMEOUT_CMD_ONLINE;
    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("TimeoutCmdOnline"), &dwTemp))
    {
        g_TimeoutCmdOnline = dwTemp;
    }

    g_TimeoutAPIDefault = TIMEOUT_API_DEFAULT;
    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("TimeoutAPIDefault"), &dwTemp))
    {
        g_TimeoutAPIDefault = dwTemp;
    }

    g_TimeoutDTRDrop = TIMEOUT_DTRDROP;
    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("TimeoutDTRDrop"), &dwTemp))
    {
        g_TimeoutDTRDrop = dwTemp;
    }

    g_TimeoutWaitForInit = TIMEOUT_WAITFORINIT;
    if (GetRegistryDWORD(HKEY_LOCAL_MACHINE, g_tszRegKeyRIL, TEXT("TimeoutWaitForInit"), &dwTemp))
    {
        g_TimeoutWaitForInit = dwTemp;
    }

    // Create init event
    m_hInitEvent = CreateEvent(NULL, TRUE, FALSE, NULL);
    if (!m_hInitEvent)
    {
        goto Error;
    }

    // Create data event
    m_hDataEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
    if (!m_hDataEvent)
    {
        goto Error;
    }

    // Create the instance handle list
    m_pInstances = new CDblList<CRilInstanceHandle>;
    if (!m_pInstances)
    {
        goto Error;
    }

    // Open the serial port
    m_pComDevice = COM_OpenInternal();
    if (!m_pComDevice)
    {
        DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : CRilHandle::StartInit : Couldn't open VSP\r\n")));
		NKDbgPrintfW(TEXT("RILDrv : t : CRilHandle::StartInit : Couldn't open VSP\r\n"));
        goto Error;
    }
    DEBUGMSG(ZONE_TRACE, (TEXT("RILDrv : t : CRilHandle::StartInit : VSP is opened successfully\r\n")));

    NKDbgPrintfW(TEXT("CRilHandle::StartInit : VSP is opened successfully\r\n"));
    // Initialize the serial port
    if (!m_pComDevice->InitComPortForRIL(NULL, NULL))
    {
        goto Error;
    }
    NKDbgPrintfW(TEXT("CRilHandle::StartInit : InitComPortForRIL successfully\r\n"));

    // Launch the auxiliary threads
    if (!LaunchThreads())
    {
        goto Error;
    }
    NKDbgPrintfW(TEXT("CRilHandle::StartInit : LaunchThreads successfully\r\n"));