atyfb.h

来自「优龙2410linux2.6.8内核源代码」· C头文件 代码 · 共 266 行

H
266
字号
/* *  ATI Frame Buffer Device Driver Core Definitions */#include <linux/config.h>    /*     *  Elements of the hardware specific atyfb_par structure     */struct crtc {	u32 vxres;	u32 vyres;	u32 h_tot_disp;	u32 h_sync_strt_wid;	u32 v_tot_disp;	u32 v_sync_strt_wid;	u32 off_pitch;	u32 gen_cntl;	u32 dp_pix_width;	/* acceleration */	u32 dp_chain_mask;	/* acceleration */};struct pll_514 {	u8 m;	u8 n;};struct pll_18818 {	u32 program_bits;	u32 locationAddr;	u32 period_in_ps;	u32 post_divider;};struct pll_ct {	u8 pll_ref_div;	u8 pll_gen_cntl;	u8 mclk_fb_div;	u8 pll_vclk_cntl;	u8 vclk_post_div;	u8 vclk_fb_div;	u8 pll_ext_cntl;	u32 dsp_config;		/* Mach64 GTB DSP */	u32 dsp_on_off;		/* Mach64 GTB DSP */	u8 mclk_post_div_real;	u8 vclk_post_div_real;};union aty_pll {	struct pll_ct ct;	struct pll_514 ibm514;	struct pll_18818 ics2595;};    /*     *  The hardware parameters for each card     */struct aty_cursor {	u8 bits[8][64];	u8 mask[8][64];	u8 *ram;};struct atyfb_par {	struct aty_cmap_regs *aty_cmap_regs;	const struct aty_dac_ops *dac_ops;	const struct aty_pll_ops *pll_ops;	struct aty_cursor *cursor;	unsigned long ati_regbase;	unsigned long clk_wr_offset;	struct crtc crtc;	union aty_pll pll;	u32 features;	u32 ref_clk_per;	u32 pll_per;	u32 mclk_per;	u8 bus_type;	u8 ram_type;	u8 mem_refresh_rate;	u8 blitter_may_be_busy;	u32 accel_flags;#ifdef __sparc__	struct pci_mmap_map *mmap_map;	u8 mmaped;	int open;#endif#ifdef CONFIG_PMAC_PBOOK	struct fb_info *next;	unsigned char *save_framebuffer;	unsigned long save_pll[64];#endif};        /*     *  ATI Mach64 features     */#define M64_HAS(feature)	((par)->features & (M64F_##feature))#define M64F_RESET_3D		0x00000001#define M64F_MAGIC_FIFO		0x00000002#define M64F_GTB_DSP		0x00000004#define M64F_FIFO_24		0x00000008#define M64F_SDRAM_MAGIC_PLL	0x00000010#define M64F_MAGIC_POSTDIV	0x00000020#define M64F_INTEGRATED		0x00000040#define M64F_CT_BUS		0x00000080#define M64F_VT_BUS		0x00000100#define M64F_MOBIL_BUS		0x00000200#define M64F_GX			0x00000400#define M64F_CT			0x00000800#define M64F_VT			0x00001000#define M64F_GT			0x00002000#define M64F_MAGIC_VRAM_SIZE	0x00004000#define M64F_G3_PB_1_1		0x00008000#define M64F_G3_PB_1024x768	0x00010000#define M64F_EXTRA_BRIGHT	0x00020000#define M64F_LT_SLEEP		0x00040000#define M64F_XL_DLL		0x00080000    /*     *  Register access     */static inline u32 aty_ld_le32(int regindex, const struct atyfb_par *par){	/* Hack for bloc 1, should be cleanly optimized by compiler */	if (regindex >= 0x400)		regindex -= 0x800;#ifdef CONFIG_ATARI	return in_le32((volatile u32 *)(par->ati_regbase + regindex));#else	return readl(par->ati_regbase + regindex);#endif}static inline void aty_st_le32(int regindex, u32 val,			       const struct atyfb_par *par){	/* Hack for bloc 1, should be cleanly optimized by compiler */	if (regindex >= 0x400)		regindex -= 0x800;#ifdef CONFIG_ATARI	out_le32((volatile u32 *)(par->ati_regbase + regindex), val);#else	writel(val, par->ati_regbase + regindex);#endif}static inline u8 aty_ld_8(int regindex, const struct atyfb_par *par){	/* Hack for bloc 1, should be cleanly optimized by compiler */	if (regindex >= 0x400)		regindex -= 0x800;#ifdef CONFIG_ATARI	return in_8(par->ati_regbase + regindex);#else	return readb(par->ati_regbase + regindex);#endif}static inline void aty_st_8(int regindex, u8 val,			    const struct atyfb_par *par){	/* Hack for bloc 1, should be cleanly optimized by compiler */	if (regindex >= 0x400)		regindex -= 0x800;#ifdef CONFIG_ATARI	out_8(par->ati_regbase + regindex, val);#else	writeb(val, par->ati_regbase + regindex);#endif}static inline u8 aty_ld_pll(int offset, const struct atyfb_par *par){	u8 res;	/* write addr byte */	aty_st_8(CLOCK_CNTL + 1, (offset << 2), par);	/* read the register value */	res = aty_ld_8(CLOCK_CNTL + 2, par);	return res;}    /*     *  DAC operations     */struct aty_dac_ops {	int (*set_dac) (const struct fb_info * info,			const union aty_pll * pll, u32 bpp, u32 accel);};extern const struct aty_dac_ops aty_dac_ibm514;	/* IBM RGB514 */extern const struct aty_dac_ops aty_dac_ati68860b;	/* ATI 68860-B */extern const struct aty_dac_ops aty_dac_att21c498;	/* AT&T 21C498 */extern const struct aty_dac_ops aty_dac_unsupported;	/* unsupported */extern const struct aty_dac_ops aty_dac_ct;	/* Integrated */    /*     *  Clock operations     */struct aty_pll_ops {	int (*var_to_pll) (const struct fb_info * info, u32 vclk_per,			   u8 bpp, union aty_pll * pll);	 u32(*pll_to_var) (const struct fb_info * info,			   const union aty_pll * pll);	void (*set_pll) (const struct fb_info * info,			 const union aty_pll * pll);};extern const struct aty_pll_ops aty_pll_ati18818_1;	/* ATI 18818 */extern const struct aty_pll_ops aty_pll_stg1703;	/* STG 1703 */extern const struct aty_pll_ops aty_pll_ch8398;	/* Chrontel 8398 */extern const struct aty_pll_ops aty_pll_att20c408;	/* AT&T 20C408 */extern const struct aty_pll_ops aty_pll_ibm514;	/* IBM RGB514 */extern const struct aty_pll_ops aty_pll_unsupported;	/* unsupported */extern const struct aty_pll_ops aty_pll_ct;	/* Integrated */extern void aty_set_pll_ct(const struct fb_info *info,			   const union aty_pll *pll);extern void aty_calc_pll_ct(const struct fb_info *info,			    struct pll_ct *pll);    /*     *  Hardware cursor support     */extern struct aty_cursor *aty_init_cursor(struct fb_info *info);extern int atyfb_cursor(struct fb_info *info, struct fb_cursor *cursor);extern void aty_set_cursor_color(struct fb_info *info);extern void aty_set_cursor_shape(struct fb_info *info);    /*     *  Hardware acceleration     */static inline void wait_for_fifo(u16 entries, const struct atyfb_par *par){	while ((aty_ld_le32(FIFO_STAT, par) & 0xffff) >	       ((u32) (0x8000 >> entries)));}static inline void wait_for_idle(struct atyfb_par *par){	wait_for_fifo(16, par);	while ((aty_ld_le32(GUI_STAT, par) & 1) != 0);	par->blitter_may_be_busy = 0;}extern void aty_reset_engine(const struct atyfb_par *par);extern void aty_init_engine(struct atyfb_par *par,			    struct fb_info *info);

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?