📄 sa1100_wdt.c
字号:
/* * Watchdog driver for the SA11x0/PXA2xx * * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> * Based on SoftDog driver by Alan Cox <alan@redhat.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * Neither Oleg Drokin nor iXcelerator.com admit liability nor provide * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> * * 27/11/2000 Initial release */#include <linux/config.h>#include <linux/module.h>#include <linux/moduleparam.h>#include <linux/types.h>#include <linux/kernel.h>#include <linux/fs.h>#include <linux/miscdevice.h>#include <linux/watchdog.h>#include <linux/init.h>#include <asm/hardware.h>#include <asm/bitops.h>#include <asm/uaccess.h>#define OSCR_FREQ 3686400#define SA1100_CLOSE_MAGIC (0x5afc4453)static unsigned long sa1100wdt_users;static int expect_close;static int pre_margin;static int boot_status;#ifdef CONFIG_WATCHDOG_NOWAYOUTstatic int nowayout = 1;#elsestatic int nowayout = 0;#endif/* * Allow only one person to hold it open */static int sa1100dog_open(struct inode *inode, struct file *file){ nonseekable_open(inode, file); if (test_and_set_bit(1,&sa1100wdt_users)) return -EBUSY; /* Activate SA1100 Watchdog timer */ OSMR3 = OSCR + pre_margin; OSSR = OSSR_M3; OWER = OWER_WME; OIER |= OIER_E3; return 0;}/* * Shut off the timer. * Lock it in if it's a module and we defined ...NOWAYOUT * Oddly, the watchdog can only be enabled, but we can turn off * the interrupt, which appears to prevent the watchdog timing out. */static int sa1100dog_release(struct inode *inode, struct file *file){ OSMR3 = OSCR + pre_margin; if (expect_close == SA1100_CLOSE_MAGIC) { OIER &= ~OIER_E3; } else { printk(KERN_CRIT "WATCHDOG: WDT device closed unexpectedly. WDT will not stop!\n"); } clear_bit(1, &sa1100wdt_users); expect_close = 0; return 0;}static ssize_t sa1100dog_write(struct file *file, const char *data, size_t len, loff_t *ppos){ if (len) { if (!nowayout) { size_t i; expect_close = 0; for (i = 0; i != len; i++) { char c; if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = SA1100_CLOSE_MAGIC; } } /* Refresh OSMR3 timer. */ OSMR3 = OSCR + pre_margin; } return len;}static struct watchdog_info ident = { .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "SA1100 Watchdog",};static int sa1100dog_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg){ int ret = -ENOIOCTLCMD; int time; switch (cmd) { case WDIOC_GETSUPPORT: ret = copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)) ? -EFAULT : 0; break; case WDIOC_GETSTATUS: ret = put_user(0, (int *)arg); break; case WDIOC_GETBOOTSTATUS: ret = put_user(boot_status, (int *)arg); break; case WDIOC_SETTIMEOUT: ret = get_user(time, (int *)arg); if (ret) break; if (time <= 0 || time > 255) { ret = -EINVAL; break; } pre_margin = OSCR_FREQ * time; OSMR3 = OSCR + pre_margin; /*fall through*/ case WDIOC_GETTIMEOUT: ret = put_user(pre_margin / OSCR_FREQ, (int *)arg); break; case WDIOC_KEEPALIVE: OSMR3 = OSCR + pre_margin; ret = 0; break; } return ret;}static struct file_operations sa1100dog_fops ={ .owner = THIS_MODULE, .write = sa1100dog_write, .ioctl = sa1100dog_ioctl, .open = sa1100dog_open, .release = sa1100dog_release,};static struct miscdevice sa1100dog_miscdev ={ .minor = WATCHDOG_MINOR, .name = "SA1100/PXA2xx watchdog", .fops = &sa1100dog_fops,};static int margin __initdata = 60; /* (secs) Default is 1 minute */static int __init sa1100dog_init(void){ int ret; /* * Read the reset status, and save it for later. If * we suspend, RCSR will be cleared, and the watchdog * reset reason will be lost. */ boot_status = (RCSR & RCSR_WDR) ? WDIOF_CARDRESET : 0; pre_margin = OSCR_FREQ * margin; ret = misc_register(&sa1100dog_miscdev); if (ret == 0) printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", margin); return ret;}static void __exit sa1100dog_exit(void){ misc_deregister(&sa1100dog_miscdev);}module_init(sa1100dog_init);module_exit(sa1100dog_exit);MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");module_param(margin, int, 0);MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");module_param(nowayout, int, 0);MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");MODULE_LICENSE("GPL");MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -