📄 link.h
字号:
/**************************************************************************** ******* ******* ******* L I N K ******* ******* **************************************************************************** Author : Ian Nandhra / Jeremy Rolls Date : * * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. Version : 0.01 Mods ---------------------------------------------------------------------------- Date By Description ---------------------------------------------------------------------------- ***************************************************************************/#ifndef _link_h#define _link_h 1#ifndef lint#ifdef SCCS_LABELS/* static char *_rio_link_h_sccs = "@(#)link.h 1.15"; */#endif#endif/************************************************* * Define the Link Status stuff ************************************************/#define LRT_ACTIVE ((ushort) 0x01)#define LRT_SPARE1 ((ushort) 0x02)#define INTRO_RCVD ((ushort) 0x04)#define FORCED_DISCONNECT ((ushort) 0x08)#define LRT_SPARE2 ((ushort) 0x80)#define TOP_OF_RTA_RAM ((ushort) 0x7000)#define HOST_SERIAL_POINTER (unsigned char **) (TOP_OF_RTA_RAM - 2 * sizeof (ushort))/* Flags for ltt_status */#define WAITING_ACK (ushort) 0x0001#define DATA_SENT (ushort) 0x0002#define WAITING_RUP (ushort) 0x0004#define WAITING_RETRY (ushort) 0x0008#define WAITING_TOPOLOGY (ushort) 0x0010#define SEND_SYNC (ushort) 0x0020#define FOAD_THIS_LINK (ushort) 0x0040#define REQUEST_SYNC (ushort) 0x0080#define REMOTE_DYING (ushort) 0x0100#define DIE_NOW (ushort) 0x0200/* Boot request stuff */#define BOOT_REQUEST ((ushort) 0) /* Request for a boot */#define BOOT_ABORT ((ushort) 1) /* Abort a boot */#define BOOT_SEQUENCE ((ushort) 2) /* Packet with the number of packets and load address */#define BOOT_COMPLETED ((ushort) 3) /* Boot completed *//* States that a link can be in */#define LINK_DISCONNECTED ((ushort) 0) /* Disconnected */#define LINK_BOOT1 ((ushort) 1) /* Trying to send 1st stage boot */#define LINK_BOOT2 ((ushort) 2) /* Trying to send 2nd stage boot */#define LINK_BOOT2WAIT ((ushort) 3) /* Waiting for selftest results */#define LINK_BOOT3 ((ushort) 4) /* Trying to send 3rd stage boots */#define LINK_SYNC ((ushort) 5) /* Syncing */#define LINK_INTRO ((ushort) 10) /* Introductory packet */#define LINK_SUPPLYID ((ushort) 11) /* Trying to supply an ID */#define LINK_TOPOLOGY ((ushort) 12) /* Send a topology update */#define LINK_REQUESTID ((ushort) 13) /* Waiting for an ID */#define LINK_CONNECTED ((ushort) 14) /* Connected */#define LINK_INTERCONNECT ((ushort) 20) /* Subnets interconnected */#define LINK_SPARE ((ushort) 40)/*** Set the default timeout for link communications.*/#define LINKTIMEOUT (400 * MILLISECOND)/*** LED stuff*/#if defined(RTA)#define LED_OFF ((ushort) 0) /* LED off */#define LED_RED ((ushort) 1) /* LED Red */#define LED_GREEN ((ushort) 2) /* LED Green */#define LED_ORANGE ((ushort) 4) /* LED Orange */#define LED_1TO8_OPEN ((ushort) 1) /* Port 1->8 LED on */#define LED_9TO16_OPEN ((ushort) 2) /* Port 9->16 LED on */#define LED_SET_COLOUR(colour) (link->led = (colour))#define LED_OR_COLOUR(colour) (link->led |= (colour))#define LED_TIMEOUT(time) (link->led_timeout = RioTimePlus(RioTime(),(time)))#else#define LED_SET_COLOUR(colour)#define LED_OR_COLOUR(colour)#define LED_TIMEOUT(time)#endif /* RTA */struct LPB { WORD link_number ; /* Link Number */ Channel_ptr in_ch ; /* Link In Channel */ Channel_ptr out_ch ; /* Link Out Channel */#ifdef RTA uchar stat_led ; /* Port open leds */ uchar led ; /* True, light led! */#endif BYTE attached_serial[4]; /* Attached serial number */ BYTE attached_host_serial[4]; /* Serial number of Host who booted the other end */ WORD descheduled ; /* Currently Descheduled */ WORD state; /* Current state */ WORD send_poll ; /* Send a Poll Packet */ Process_ptr ltt_p ; /* Process Descriptor */ Process_ptr lrt_p ; /* Process Descriptor */ WORD lrt_status ; /* Current lrt status */ WORD ltt_status ; /* Current ltt status */ WORD timeout ; /* Timeout value */ WORD topology; /* Topology bits */ WORD mon_ltt ; WORD mon_lrt ; WORD WaitNoBoot ; /* Secs to hold off booting */ PKT_ptr add_packet_list; /* Add packets to here */ PKT_ptr remove_packet_list; /* Send packets from here */#ifdef RTA#ifdef DCIRRUS#define QBUFS_PER_REDIRECT (4 / PKTS_PER_BUFFER + 1) #else#define QBUFS_PER_REDIRECT (8 / PKTS_PER_BUFFER + 1) #endif PKT_ptr_ptr rd_add ; /* Add a new Packet here */ Q_BUF_ptr rd_add_qb; /* Pointer to the add Q buf */ PKT_ptr_ptr rd_add_st_qbb ; /* Pointer to start of the Q's buf */ PKT_ptr_ptr rd_add_end_qbb ; /* Pointer to the end of the Q's buf */ PKT_ptr_ptr rd_remove ; /* Remove a Packet here */ Q_BUF_ptr rd_remove_qb ; /* Pointer to the remove Q buf */ PKT_ptr_ptr rd_remove_st_qbb ; /* Pointer to the start of the Q buf */ PKT_ptr_ptr rd_remove_end_qbb ; /* Pointer to the end of the Q buf */ ushort pkts_in_q ; /* Packets in queue */#endif Channel_ptr lrt_fail_chan ; /* Lrt's failure channel */ Channel_ptr ltt_fail_chan ; /* Ltt's failure channel */#if defined (HOST) || defined (INKERNEL) /* RUP structure for HOST to driver communications */ struct RUP rup ; #endif struct RUP link_rup; /* RUP for the link (POLL, topology etc.) */ WORD attached_link ; /* Number of attached link */ WORD csum_errors ; /* csum errors */ WORD num_disconnects ; /* number of disconnects */ WORD num_sync_rcvd ; /* # sync's received */ WORD num_sync_rqst ; /* # sync requests */ WORD num_tx ; /* Num pkts sent */ WORD num_rx ; /* Num pkts received */ WORD module_attached; /* Module tpyes of attached */ WORD led_timeout; /* LED timeout */ WORD first_port; /* First port to service */ WORD last_port; /* Last port to service */ } ;#endif/*********** end of file ***********/
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -