amd74xx.c

优龙2410linux2.6.8内核源代码

 */

static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio)
{
	if (pio == 255) {
		amd_set_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO));
		return;
	}

	amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
}

/*
 * amd74xx_dmaproc() is a callback from upper layers that can do
 * a lot, but we use it for DMA/PIO tuning only, delegating everything
 * else to the default ide_dmaproc().
 */

static int amd74xx_ide_dma_check(ide_drive_t *drive)
{
	int w80 = HWIF(drive)->udma_four;

	u8 speed = ide_find_best_mode(drive,
		XFER_PIO | XFER_EPIO | XFER_MWDMA | XFER_UDMA |
		((amd_config->flags & AMD_BAD_SWDMA) ? 0 : XFER_SWDMA) |
		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_66 ? XFER_UDMA_66 : 0) |
		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0) |
		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_133 ? XFER_UDMA_133 : 0));

	amd_set_drive(drive, speed);

	if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
		return HWIF(drive)->ide_dma_on(drive);
	return HWIF(drive)->ide_dma_off_quietly(drive);
}

/*
 * The initialization callback. Here we determine the IDE chip type
 * and initialize its drive independent registers.
 */

static unsigned int __init init_chipset_amd74xx(struct pci_dev *dev, const char *name)
{
	unsigned char t;
	unsigned int u;
	int i;

/*
 * Check for bad SWDMA.
 */

	if (amd_config->flags & AMD_CHECK_SWDMA) {
		pci_read_config_byte(dev, PCI_REVISION_ID, &t);
		if (t <= 7)
			amd_config->flags |= AMD_BAD_SWDMA;
	}

/*
 * Check 80-wire cable presence.
 */

	switch (amd_config->flags & AMD_UDMA) {

		case AMD_UDMA_133:
		case AMD_UDMA_100:
			pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
			pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
			amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
			for (i = 24; i >= 0; i -= 8)
				if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
					printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n",
						amd_chipset->name);
					amd_80w |= (1 << (1 - (i >> 4)));
				}
			break;

		case AMD_UDMA_66:
			pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
			for (i = 24; i >= 0; i -= 8)
				if ((u >> i) & 4)
					amd_80w |= (1 << (1 - (i >> 4)));
			break;
	}

/*
 * Take care of prefetch & postwrite.
 */

	pci_read_config_byte(dev, AMD_IDE_CONFIG, &t);
	pci_write_config_byte(dev, AMD_IDE_CONFIG,
		(amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0));

/*
 * Take care of incorrectly wired Serenade mainboards.
 */

	if ((amd_config->flags & AMD_CHECK_SERENADE) &&
		dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
		dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
			amd_config->flags = AMD_UDMA_100;

/*
 * Determine the system bus clock.
 */

	amd_clock = system_bus_clock() * 1000;

	switch (amd_clock) {
		case 33000: amd_clock = 33333; break;
		case 37000: amd_clock = 37500; break;
		case 41000: amd_clock = 41666; break;
	}

	if (amd_clock < 20000 || amd_clock > 50000) {
		printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n",
			amd_chipset->name, amd_clock);
		printk(KERN_WARNING "%s: Use ide0=ata66 if you want to assume 80-wire cable\n",
			amd_chipset->name);
		amd_clock = 33333;
	}

/*
 * Print the boot message.
 */

	pci_read_config_byte(dev, PCI_REVISION_ID, &t);
	printk(KERN_INFO "%s: %s (rev %02x) %s controller\n",
		amd_chipset->name, pci_name(dev), t, amd_dma[amd_config->flags & AMD_UDMA]);

/*
 * Register /proc/ide/amd74xx entry
 */

#if defined(DISPLAY_AMD_TIMINGS) && defined(CONFIG_PROC_FS)
        if (!amd74xx_proc) {
                amd_base = pci_resource_start(dev, 4);
                bmide_dev = dev;
		ide_pci_create_host_proc("amd74xx", amd74xx_get_info);
                amd74xx_proc = 1;
        }
#endif /* DISPLAY_AMD_TIMINGS && CONFIG_PROC_FS */

	return dev->irq;
}

static void __init init_hwif_amd74xx(ide_hwif_t *hwif)
{
	int i;

	hwif->autodma = 0;

	hwif->tuneproc = &amd74xx_tune_drive;
	hwif->speedproc = &amd_set_drive;

	for (i = 0; i < 2; i++) {
		hwif->drives[i].io_32bit = 1;
		hwif->drives[i].unmask = 1;
		hwif->drives[i].autotune = 1;
		hwif->drives[i].dn = hwif->channel * 2 + i;
	}

	if (!hwif->dma_base)
		return;

        hwif->atapi_dma = 1;
        hwif->ultra_mask = 0x7f;
        hwif->mwdma_mask = 0x07;
        hwif->swdma_mask = 0x07;

	if (!hwif->udma_four)
		hwif->udma_four = (amd_80w >> hwif->channel) & 1;
        hwif->ide_dma_check = &amd74xx_ide_dma_check;
        if (!noautodma)
                hwif->autodma = 1;
        hwif->drives[0].autodma = hwif->autodma;
        hwif->drives[1].autodma = hwif->autodma;
}

#define DECLARE_AMD_DEV(name_str)					\
	{								\
		.name		= name_str,				\
		.init_chipset	= init_chipset_amd74xx,			\
		.init_hwif	= init_hwif_amd74xx,			\
		.channels	= 2,					\
		.autodma	= AUTODMA,				\
		.enablebits	= {{0x40,0x02,0x02}, {0x40,0x01,0x01}},	\
		.bootable	= ON_BOARD,				\
	}

#define DECLARE_NV_DEV(name_str)					\
	{								\
		.name		= name_str,				\
		.init_chipset	= init_chipset_amd74xx,			\
		.init_hwif	= init_hwif_amd74xx,			\
		.channels	= 2,					\
		.autodma	= AUTODMA,				\
		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x01,0x01}},	\
		.bootable	= ON_BOARD,				\
	}

static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
	/*  0 */ DECLARE_AMD_DEV("AMD7401"),
	/*  1 */ DECLARE_AMD_DEV("AMD7409"),
	/*  2 */ DECLARE_AMD_DEV("AMD7411"),
	/*  3 */ DECLARE_AMD_DEV("AMD7441"),
	/*  4 */ DECLARE_AMD_DEV("AMD8111"),

	/*  5 */ DECLARE_NV_DEV("NFORCE"),
	/*  6 */ DECLARE_NV_DEV("NFORCE2"),
	/*  7 */ DECLARE_NV_DEV("NFORCE2-U400R"),
	/*  8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA"),
	/*  9 */ DECLARE_NV_DEV("NFORCE3-150"),
	/* 10 */ DECLARE_NV_DEV("NFORCE3-250"),
	/* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA"),
	/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
	/* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
	/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
};

static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
	amd_chipset = amd74xx_chipsets + id->driver_data;
	amd_config = amd_ide_chips + id->driver_data;
	if (dev->device != amd_config->id) BUG();
	ide_setup_pci_device(dev, amd_chipset);
	return 0;
}

static struct pci_device_id amd74xx_pci_tbl[] = {
	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_COBRA_7401,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  0 },
	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_VIPER_7409,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  1 },
	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_VIPER_7411,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  2 },
	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_OPUS_7441,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  3 },
	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_8111_IDE,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  4 },
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  5 },
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  6 },
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  7 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  8 },
#endif
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  9 },
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
#endif
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 },
	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 },
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);

static struct pci_driver driver = {
	.name		= "AMD IDE",
	.id_table	= amd74xx_pci_tbl,
	.probe		= amd74xx_probe,
};

static int amd74xx_ide_init(void)
{
	return ide_pci_register_driver(&driver);
}

module_init(amd74xx_ide_init);

MODULE_AUTHOR("Vojtech Pavlik");
MODULE_DESCRIPTION("AMD PCI IDE driver");
MODULE_LICENSE("GPL");