keyspan.h

优龙2410linux2.6.8内核源代码

/*
  Keyspan USB to Serial Converter driver
 
  (C) Copyright (C) 2000-2001
      Hugh Blemings <[e-mail]>
   
  This program is free software; you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.

  See http://misc.nu/hugh/keyspan.html for more information.
  
  Code in this driver inspired by and in a number of places taken
  from Brian Warner's original Keyspan-PDA driver.

  This driver has been put together with the support of Innosys, Inc.
  and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
  Thanks Guys :)
  
  Thanks to Paulus for miscellaneous tidy ups, some largish chunks
  of much nicer and/or completely new code and (perhaps most uniquely)
  having the patience to sit down and explain why and where he'd changed
  stuff.

  Tip 'o the hat to IBM (and previously Linuxcare :) for supporting 
  staff in their work on open source projects.
  
  See keyspan.c for update history.

*/

#ifndef __LINUX_USB_SERIAL_KEYSPAN_H
#define __LINUX_USB_SERIAL_KEYSPAN_H


/* Function prototypes for Keyspan serial converter */
static int  keyspan_open		(struct usb_serial_port *port,
					 struct file *filp);
static void keyspan_close		(struct usb_serial_port *port,
					 struct file *filp);
static int  keyspan_startup		(struct usb_serial *serial);
static void keyspan_shutdown		(struct usb_serial *serial);
static void keyspan_rx_throttle		(struct usb_serial_port *port);
static void keyspan_rx_unthrottle	(struct usb_serial_port *port);
static int  keyspan_write_room		(struct usb_serial_port *port);

static int  keyspan_write		(struct usb_serial_port *port,
					 int from_user,
					 const unsigned char *buf,
					 int count);

static void keyspan_send_setup		(struct usb_serial_port *port,
					 int reset_port);


static int  keyspan_chars_in_buffer 	(struct usb_serial_port *port);
static int  keyspan_ioctl		(struct usb_serial_port *port,
					 struct file *file,
					 unsigned int cmd,
					 unsigned long arg);
static void keyspan_set_termios		(struct usb_serial_port *port,
					 struct termios *old);
static void keyspan_break_ctl		(struct usb_serial_port *port,
					 int break_state);
static int  keyspan_tiocmget		(struct usb_serial_port *port,
					 struct file *file);
static int  keyspan_tiocmset		(struct usb_serial_port *port,
					 struct file *file, unsigned int set,
					 unsigned int clear);
static int  keyspan_fake_startup	(struct usb_serial *serial);

static int  keyspan_usa19_calc_baud	(u32 baud_rate, u32 baudclk, 
					 u8 *rate_hi, u8 *rate_low,
					 u8 *prescaler, int portnum);

static int  keyspan_usa19w_calc_baud	(u32 baud_rate, u32 baudclk,
					 u8 *rate_hi, u8 *rate_low,
					 u8 *prescaler, int portnum);

static int  keyspan_usa28_calc_baud	(u32 baud_rate, u32 baudclk,
					 u8 *rate_hi, u8 *rate_low,
					 u8 *prescaler, int portnum);

static int  keyspan_usa19hs_calc_baud	(u32 baud_rate, u32 baudclk,
					 u8 *rate_hi, u8 *rate_low,
					 u8 *prescaler, int portnum);

static int  keyspan_usa28_send_setup	(struct usb_serial *serial,
					 struct usb_serial_port *port,
					 int reset_port);
static int  keyspan_usa26_send_setup	(struct usb_serial *serial,
	       				 struct usb_serial_port *port,
					 int reset_port);
static int  keyspan_usa49_send_setup	(struct usb_serial *serial,
					 struct usb_serial_port *port,
					 int reset_port);

static int  keyspan_usa90_send_setup	(struct usb_serial *serial,
					 struct usb_serial_port *port,
					 int reset_port);

/* Struct used for firmware - increased size of data section
   to allow Keyspan's 'C' firmware struct to be used unmodified */
struct ezusb_hex_record {
	__u16 address;
	__u8 data_size;
	__u8 data[64];
};

/* Conditionally include firmware images, if they aren't
   included create a null pointer instead.  Current 
   firmware images aren't optimised to remove duplicate
   addresses in the image itself. */
#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28
	#include "keyspan_usa28_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa28_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28X
	#include "keyspan_usa28x_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa28x_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XA
	#include "keyspan_usa28xa_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa28xa_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XB
	#include "keyspan_usa28xb_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa28xb_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19
	#include "keyspan_usa19_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa19_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QI
	#include "keyspan_usa19qi_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa19qi_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_MPR
        #include "keyspan_mpr_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_mpr_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QW
	#include "keyspan_usa19qw_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa19qw_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA18X
	#include "keyspan_usa18x_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa18x_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19W
	#include "keyspan_usa19w_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa19w_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49W
	#include "keyspan_usa49w_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa49w_firmware = NULL;
#endif

#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49WLC
        #include "keyspan_usa49wlc_fw.h"
#else
	static const struct ezusb_hex_record *keyspan_usa49wlc_firmware = NULL;
#endif

/* Values used for baud rate calculation - device specific */
#define	KEYSPAN_INVALID_BAUD_RATE		(-1)
#define	KEYSPAN_BAUD_RATE_OK			(0)
#define	KEYSPAN_USA18X_BAUDCLK			(12000000L)	/* a guess */
#define	KEYSPAN_USA19_BAUDCLK			(12000000L)
#define	KEYSPAN_USA19W_BAUDCLK			(24000000L)
#define	KEYSPAN_USA19HS_BAUDCLK			(14769231L)
#define	KEYSPAN_USA28_BAUDCLK			(1843200L)
#define	KEYSPAN_USA28X_BAUDCLK			(12000000L)
#define	KEYSPAN_USA49W_BAUDCLK			(48000000L)

/* Some constants used to characterise each device.  */
#define		KEYSPAN_MAX_NUM_PORTS		(4)
#define		KEYSPAN_MAX_FLIPS		(2)

/* Device info for the Keyspan serial converter, used
   by the overall usb-serial probe function */
#define KEYSPAN_VENDOR_ID			(0x06cd)

/* Product IDs for the products supported, pre-renumeration */
#define	keyspan_usa18x_pre_product_id		0x0105
#define	keyspan_usa19_pre_product_id		0x0103
#define	keyspan_usa19qi_pre_product_id		0x010b
#define	keyspan_mpr_pre_product_id		0x011b
#define	keyspan_usa19qw_pre_product_id		0x0118
#define	keyspan_usa19w_pre_product_id		0x0106
#define	keyspan_usa28_pre_product_id		0x0101
#define	keyspan_usa28x_pre_product_id		0x0102
#define	keyspan_usa28xa_pre_product_id		0x0114
#define	keyspan_usa28xb_pre_product_id		0x0113
#define	keyspan_usa49w_pre_product_id		0x0109
#define	keyspan_usa49wlc_pre_product_id		0x011a

/* Product IDs post-renumeration.  Note that the 28x and 28xb
   have the same id's post-renumeration but behave identically
   so it's not an issue. */
#define	keyspan_usa18x_product_id		0x0112
#define	keyspan_usa19_product_id		0x0107
#define	keyspan_usa19qi_product_id		0x010c
#define	keyspan_usa19hs_product_id		0x0121
#define	keyspan_mpr_product_id			0x011c
#define	keyspan_usa19qw_product_id		0x0119
#define	keyspan_usa19w_product_id		0x0108
#define	keyspan_usa28_product_id		0x010f
#define	keyspan_usa28x_product_id		0x0110
#define	keyspan_usa28xa_product_id		0x0115
#define	keyspan_usa28xb_product_id		0x0110
#define	keyspan_usa49w_product_id		0x010a
#define	keyspan_usa49wlc_product_id		0x012a


struct keyspan_device_details {
	/* product ID value */
	int	product_id;

	enum	{msg_usa26, msg_usa28, msg_usa49, msg_usa90} msg_format;

		/* Number of physical ports */
	int	num_ports;

		/* 1 if endpoint flipping used on input, 0 if not */
	int	indat_endp_flip;

		/* 1 if endpoint flipping used on output, 0 if not */
	int 	outdat_endp_flip;

		/* Table mapping input data endpoint IDs to physical
		   port number and flip if used */
	int	indat_endpoints[KEYSPAN_MAX_NUM_PORTS];

		/* Same for output endpoints */
	int	outdat_endpoints[KEYSPAN_MAX_NUM_PORTS];

		/* Input acknowledge endpoints */
	int	inack_endpoints[KEYSPAN_MAX_NUM_PORTS];

		/* Output control endpoints */
	int	outcont_endpoints[KEYSPAN_MAX_NUM_PORTS];

		/* Endpoint used for input status */
	int	instat_endpoint;

		/* Endpoint used for global control functions */
	int	glocont_endpoint;

	int	(*calculate_baud_rate) (u32 baud_rate, u32 baudclk,
			u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum);
	u32	baudclk;
}; 

/* Now for each device type we setup the device detail
   structure with the appropriate information (provided
   in Keyspan's documentation) */

static const struct keyspan_device_details usa18x_device_details = {
	.product_id		= keyspan_usa18x_product_id,
	.msg_format		= msg_usa26,
	.num_ports		= 1,
	.indat_endp_flip	= 0,
	.outdat_endp_flip	= 1,
	.indat_endpoints	= {0x81},
	.outdat_endpoints	= {0x01},
	.inack_endpoints	= {0x85},
	.outcont_endpoints	= {0x05},
	.instat_endpoint	= 0x87,
	.glocont_endpoint	= 0x07,
	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
	.baudclk		= KEYSPAN_USA18X_BAUDCLK,
};

static const struct keyspan_device_details usa19_device_details = {
	.product_id		= keyspan_usa19_product_id,
	.msg_format		= msg_usa28,
	.num_ports		= 1,
	.indat_endp_flip	= 1,
	.outdat_endp_flip	= 1,
	.indat_endpoints	= {0x81},
	.outdat_endpoints	= {0x01},
	.inack_endpoints	= {0x83},
	.outcont_endpoints	= {0x03},
	.instat_endpoint	= 0x84,
	.glocont_endpoint	= -1,
	.calculate_baud_rate	= keyspan_usa19_calc_baud,
	.baudclk		= KEYSPAN_USA19_BAUDCLK,
};

static const struct keyspan_device_details usa19qi_device_details = {
	.product_id		= keyspan_usa19qi_product_id,
	.msg_format		= msg_usa28,
	.num_ports		= 1,
	.indat_endp_flip	= 1,
	.outdat_endp_flip	= 1,
	.indat_endpoints	= {0x81},
	.outdat_endpoints	= {0x01},
	.inack_endpoints	= {0x83},
	.outcont_endpoints	= {0x03},
	.instat_endpoint	= 0x84,
	.glocont_endpoint	= -1,
	.calculate_baud_rate	= keyspan_usa28_calc_baud,
	.baudclk		= KEYSPAN_USA19_BAUDCLK,
};

static const struct keyspan_device_details mpr_device_details = {
	.product_id		= keyspan_mpr_product_id,
	.msg_format		= msg_usa28,