📄 magellan.c
字号:
/* * $Id: magellan.c,v 1.16 2002/01/22 20:28:39 vojtech Exp $ * * Copyright (c) 1999-2001 Vojtech Pavlik *//* * Magellan and Space Mouse 6dof controller driver for Linux *//* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Should you need to contact me, the author, you can do so either by * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */#include <linux/kernel.h>#include <linux/module.h>#include <linux/slab.h>#include <linux/input.h>#include <linux/serio.h>#include <linux/init.h>MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");MODULE_DESCRIPTION("Magellan and SpaceMouse 6dof controller driver");MODULE_LICENSE("GPL");/* * Definitions & global arrays. */#define MAGELLAN_MAX_LENGTH 32static int magellan_buttons[] = { BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8 };static int magellan_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ };static char *magellan_name = "LogiCad3D Magellan / SpaceMouse";/* * Per-Magellan data. */struct magellan { struct input_dev dev; int idx; unsigned char data[MAGELLAN_MAX_LENGTH]; char phys[32];};/* * magellan_crunch_nibbles() verifies that the bytes sent from the Magellan * have correct upper nibbles for the lower ones, if not, the packet will * be thrown away. It also strips these upper halves to simplify further * processing. */static int magellan_crunch_nibbles(unsigned char *data, int count){ static unsigned char nibbles[16] = "0AB3D56GH9:K<MN?"; do { if (data[count] == nibbles[data[count] & 0xf]) data[count] = data[count] & 0xf; else return -1; } while (--count); return 0;}static void magellan_process_packet(struct magellan* magellan, struct pt_regs *regs){ struct input_dev *dev = &magellan->dev; unsigned char *data = magellan->data; int i, t; if (!magellan->idx) return; input_regs(dev, regs); switch (magellan->data[0]) { case 'd': /* Axis data */ if (magellan->idx != 25) return; if (magellan_crunch_nibbles(data, 24)) return; for (i = 0; i < 6; i++) input_report_abs(dev, magellan_axes[i], (data[(i << 2) + 1] << 12 | data[(i << 2) + 2] << 8 | data[(i << 2) + 3] << 4 | data[(i << 2) + 4]) - 32768); break; case 'k': /* Button data */ if (magellan->idx != 4) return; if (magellan_crunch_nibbles(data, 3)) return; t = (data[1] << 1) | (data[2] << 5) | data[3]; for (i = 0; i < 9; i++) input_report_key(dev, magellan_buttons[i], (t >> i) & 1); break; } input_sync(dev);}static irqreturn_t magellan_interrupt(struct serio *serio, unsigned char data, unsigned int flags, struct pt_regs *regs){ struct magellan* magellan = serio->private; if (data == '\r') { magellan_process_packet(magellan, regs); magellan->idx = 0; } else { if (magellan->idx < MAGELLAN_MAX_LENGTH) magellan->data[magellan->idx++] = data; } return IRQ_HANDLED;}/* * magellan_disconnect() is the opposite of magellan_connect() */static void magellan_disconnect(struct serio *serio){ struct magellan* magellan = serio->private; input_unregister_device(&magellan->dev); serio_close(serio); kfree(magellan);}/* * magellan_connect() is the routine that is called when someone adds a * new serio device. It looks for the Magellan, and if found, registers * it as an input device. */static void magellan_connect(struct serio *serio, struct serio_dev *dev){ struct magellan *magellan; int i, t; if (serio->type != (SERIO_RS232 | SERIO_MAGELLAN)) return; if (!(magellan = kmalloc(sizeof(struct magellan), GFP_KERNEL))) return; memset(magellan, 0, sizeof(struct magellan)); magellan->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; i < 9; i++) set_bit(magellan_buttons[i], magellan->dev.keybit); for (i = 0; i < 6; i++) { t = magellan_axes[i]; set_bit(t, magellan->dev.absbit); magellan->dev.absmin[t] = -360; magellan->dev.absmax[t] = 360; } sprintf(magellan->phys, "%s/input0", serio->phys); init_input_dev(&magellan->dev); magellan->dev.private = magellan; magellan->dev.name = magellan_name; magellan->dev.phys = magellan->phys; magellan->dev.id.bustype = BUS_RS232; magellan->dev.id.vendor = SERIO_MAGELLAN; magellan->dev.id.product = 0x0001; magellan->dev.id.version = 0x0100; serio->private = magellan; if (serio_open(serio, dev)) { kfree(magellan); return; } input_register_device(&magellan->dev); printk(KERN_INFO "input: %s on %s\n", magellan_name, serio->phys);}/* * The serio device structure. */static struct serio_dev magellan_dev = { .interrupt = magellan_interrupt, .connect = magellan_connect, .disconnect = magellan_disconnect,};/* * The functions for inserting/removing us as a module. */int __init magellan_init(void){ serio_register_device(&magellan_dev); return 0;}void __exit magellan_exit(void){ serio_unregister_device(&magellan_dev);}module_init(magellan_init);module_exit(magellan_exit);
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -