⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 process.c

📁 优龙2410linux2.6.8内核源代码
💻 C
字号:
/* $Id: process.c,v 1.6 2004/05/11 12:28:25 starvik Exp $ *  *  linux/arch/cris/kernel/process.c * *  Copyright (C) 1995  Linus Torvalds *  Copyright (C) 2000-2002  Axis Communications AB * *  Authors:   Bjorn Wesen (bjornw@axis.com) *             Mikael Starvik (starvik@axis.com) * * This file handles the architecture-dependent parts of process handling.. */#include <linux/config.h>#include <linux/sched.h>#include <linux/err.h>#include <linux/fs.h>#include <linux/slab.h>#include <asm/arch/svinto.h>#include <linux/init.h>#ifdef CONFIG_ETRAX_GPIOvoid etrax_gpio_wake_up_check(void); /* drivers/gpio.c */#endif/* * We use this if we don't have any better * idle routine.. */void default_idle(void){#ifdef CONFIG_ETRAX_GPIO  etrax_gpio_wake_up_check();#endif}/* if the watchdog is enabled, we can simply disable interrupts and go * into an eternal loop, and the watchdog will reset the CPU after 0.1s * if on the other hand the watchdog wasn't enabled, we just enable it and wait */void hard_reset_now (void){	/*	 * Don't declare this variable elsewhere.  We don't want any other	 * code to know about it than the watchdog handler in entry.S and	 * this code, implementing hard reset through the watchdog.	 */#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)	extern int cause_of_death;#endif	printk("*** HARD RESET ***\n");	local_irq_disable();#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)	cause_of_death = 0xbedead;#else	/* Since we dont plan to keep on reseting the watchdog,	   the key can be arbitrary hence three */	*R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) |		IO_STATE(R_WATCHDOG, enable, start);#endif	while(1) /* waiting for RETRIBUTION! */ ;}/* * Return saved PC of a blocked thread. */unsigned long thread_saved_pc(struct task_struct *t){	return (unsigned long)user_regs(t->thread_info)->irp;}static void kernel_thread_helper(void* dummy, int (*fn)(void *), void * arg){  fn(arg);  do_exit(-1); /* Should never be called, return bad exit value */}/* * Create a kernel thread */int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags){	struct pt_regs regs;	memset(&regs, 0, sizeof(regs));        /* Don't use r10 since that is set to 0 in copy_thread */	regs.r11 = (unsigned long)fn;	regs.r12 = (unsigned long)arg;	regs.irp = (unsigned long)kernel_thread_helper;	/* Ok, create the new process.. */        return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);}/* setup the child's kernel stack with a pt_regs and switch_stack on it. * it will be un-nested during _resume and _ret_from_sys_call when the * new thread is scheduled. * * also setup the thread switching structure which is used to keep * thread-specific data during _resumes. * */asmlinkage void ret_from_fork(void);int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,		unsigned long unused,		struct task_struct *p, struct pt_regs *regs){	struct pt_regs * childregs;	struct switch_stack *swstack;		/* put the pt_regs structure at the end of the new kernel stack page and fix it up	 * remember that the task_struct doubles as the kernel stack for the task	 */	childregs = user_regs(p->thread_info);                	*childregs = *regs;  /* struct copy of pt_regs */                p->set_child_tid = p->clear_child_tid = NULL;	        childregs->r10 = 0;  /* child returns 0 after a fork/clone */		/* put the switch stack right below the pt_regs */	swstack = ((struct switch_stack *)childregs) - 1;	swstack->r9 = 0; /* parameter to ret_from_sys_call, 0 == dont restart the syscall */	/* we want to return into ret_from_sys_call after the _resume */	swstack->return_ip = (unsigned long) ret_from_fork; /* Will call ret_from_sys_call */		/* fix the user-mode stackpointer */	p->thread.usp = usp;		/* and the kernel-mode one */	p->thread.ksp = (unsigned long) swstack;#ifdef DEBUG	printk("copy_thread: new regs at 0x%p, as shown below:\n", childregs);	show_registers(childregs);#endif	return 0;}/*  * Be aware of the "magic" 7th argument in the four system-calls below. * They need the latest stackframe, which is put as the 7th argument by * entry.S. The previous arguments are dummies or actually used, but need * to be defined to reach the 7th argument. * * N.B.: Another method to get the stackframe is to use current_regs(). But * it returns the latest stack-frame stacked when going from _user mode_ and * some of these (at least sys_clone) are called from kernel-mode sometimes * (for example during kernel_thread, above) and thus cannot use it. Thus, * to be sure not to get any surprises, we use the method for the other calls * as well. */asmlinkage int sys_fork(long r10, long r11, long r12, long r13, long mof, long srp,			struct pt_regs *regs){	return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);}/* if newusp is 0, we just grab the old usp *//* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */asmlinkage int sys_clone(unsigned long newusp, unsigned long flags,			 int* parent_tid, int* child_tid, long mof, long srp,			 struct pt_regs *regs){	if (!newusp)		newusp = rdusp();	return do_fork(flags & ~CLONE_IDLETASK, newusp, regs, 0, parent_tid, child_tid);}/* vfork is a system call in i386 because of register-pressure - maybe * we can remove it and handle it in libc but we put it here until then. */asmlinkage int sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,			 struct pt_regs *regs){        return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);}/* * sys_execve() executes a new program. */asmlinkage int sys_execve(const char *fname, char **argv, char **envp,			  long r13, long mof, long srp, 			  struct pt_regs *regs){	int error;	char *filename;	filename = getname(fname);	error = PTR_ERR(filename);	if (IS_ERR(filename))	        goto out;	error = do_execve(filename, argv, envp, regs);	putname(filename); out:	return error;}/* * These bracket the sleeping functions.. */#define first_sched	((unsigned long)__sched_text_start)#define last_sched	((unsigned long)__sched_text_end)unsigned long get_wchan(struct task_struct *p){#if 0	/* YURGH. TODO. */        unsigned long ebp, esp, eip;        unsigned long stack_page;        int count = 0;        if (!p || p == current || p->state == TASK_RUNNING)                return 0;        stack_page = (unsigned long)p;        esp = p->thread.esp;        if (!stack_page || esp < stack_page || esp > 8188+stack_page)                return 0;        /* include/asm-i386/system.h:switch_to() pushes ebp last. */        ebp = *(unsigned long *) esp;        do {                if (ebp < stack_page || ebp > 8184+stack_page)                        return 0;                eip = *(unsigned long *) (ebp+4);                if (eip < first_sched || eip >= last_sched)                        return eip;                ebp = *(unsigned long *) ebp;        } while (count++ < 16);#endif        return 0;}#undef last_sched#undef first_schedvoid show_regs(struct pt_regs * regs){	unsigned long usp = rdusp();	printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",	       regs->irp, regs->srp, regs->dccr, usp, regs->mof );	printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",	       regs->r0, regs->r1, regs->r2, regs->r3);	printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",	       regs->r4, regs->r5, regs->r6, regs->r7);	printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",	       regs->r8, regs->r9, regs->r10, regs->r11);	printk("r12: %08lx r13: %08lx oR10: %08lx\n",	       regs->r12, regs->r13, regs->orig_r10);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -