core_titan.c

优龙2410linux2.6.8内核源代码

/*
 *	linux/arch/alpha/kernel/core_titan.c
 *
 * Code common to all TITAN core logic chips.
 */

#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_titan.h>
#undef __EXTERN_INLINE

#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/vmalloc.h>
#include <linux/bootmem.h>

#include <asm/ptrace.h>
#include <asm/smp.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>

#include "proto.h"
#include "pci_impl.h"

/* Save Titan configuration data as the console had it set up.  */

struct
{
	unsigned long wsba[4];
	unsigned long wsm[4];
	unsigned long tba[4];
} saved_config[4] __attribute__((common));

/*
 * BIOS32-style PCI interface:
 */

#define DEBUG_CONFIG 0

#if DEBUG_CONFIG
# define DBG_CFG(args)	printk args
#else
# define DBG_CFG(args)
#endif


/*
 * Routines to access TIG registers.
 */
static inline volatile unsigned long *
mk_tig_addr(int offset)
{
	return (volatile unsigned long *)(TITAN_TIG_SPACE + (offset << 6));
}

static inline u8 
titan_read_tig(int offset, u8 value)
{
	volatile unsigned long *tig_addr = mk_tig_addr(offset);
	return (u8)(*tig_addr & 0xff);
}

static inline void 
titan_write_tig(int offset, u8 value)
{
	volatile unsigned long *tig_addr = mk_tig_addr(offset);
	*tig_addr = (unsigned long)value;
}


/*
 * Given a bus, device, and function number, compute resulting
 * configuration space address
 * accordingly.  It is therefore not safe to have concurrent
 * invocations to configuration space access routines, but there
 * really shouldn't be any need for this.
 *
 * Note that all config space accesses use Type 1 address format.
 *
 * Note also that type 1 is determined by non-zero bus number.
 *
 * Type 1:
 *
 *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
 *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 *
 *	31:24	reserved
 *	23:16	bus number (8 bits = 128 possible buses)
 *	15:11	Device number (5 bits)
 *	10:8	function number
 *	 7:2	register number
 *  
 * Notes:
 *	The function number selects which function of a multi-function device 
 *	(e.g., SCSI and Ethernet).
 * 
 *	The register selects a DWORD (32 bit) register offset.  Hence it
 *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
 *	bits.
 */

static int
mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
	     unsigned long *pci_addr, unsigned char *type1)
{
	struct pci_controller *hose = pbus->sysdata;
	unsigned long addr;
	u8 bus = pbus->number;

	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
		 "pci_addr=0x%p, type1=0x%p)\n",
		 bus, device_fn, where, pci_addr, type1));

	if (!pbus->parent) /* No parent means peer PCI bus. */
		bus = 0;
        *type1 = (bus != 0);

        addr = (bus << 16) | (device_fn << 8) | where;
	addr |= hose->config_space_base;
		
	*pci_addr = addr;
	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
	return 0;
}

static int
titan_read_config(struct pci_bus *bus, unsigned int devfn, int where,
		  int size, u32 *value)
{
	unsigned long addr;
	unsigned char type1;

	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
		return PCIBIOS_DEVICE_NOT_FOUND;

	switch (size) {
	case 1:
		*value = __kernel_ldbu(*(vucp)addr);
		break;
	case 2:
		*value = __kernel_ldwu(*(vusp)addr);
		break;
	case 4:
		*value = *(vuip)addr;
		break;
	}

	return PCIBIOS_SUCCESSFUL;
}

static int 
titan_write_config(struct pci_bus *bus, unsigned int devfn, int where,
		   int size, u32 value)
{
	unsigned long addr;
	unsigned char type1;

	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
		return PCIBIOS_DEVICE_NOT_FOUND;

	switch (size) {
	case 1:
		__kernel_stb(value, *(vucp)addr);
		mb();
		__kernel_ldbu(*(vucp)addr);
		break;
	case 2:
		__kernel_stw(value, *(vusp)addr);
		mb();
		__kernel_ldwu(*(vusp)addr);
		break;
	case 4:
		*(vuip)addr = value;
		mb();
		*(vuip)addr;
		break;
	}

	return PCIBIOS_SUCCESSFUL;
}

struct pci_ops titan_pci_ops = 
{
	.read =		titan_read_config,
	.write =	titan_write_config,
};


void
titan_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
{
	titan_pachip *pachip = 
	  (hose->index & 1) ? TITAN_pachip1 : TITAN_pachip0;
	titan_pachip_port *port;
	volatile unsigned long *csr;
	unsigned long value;

	/* Get the right hose.  */
	port = &pachip->g_port;
	if (hose->index & 2) 
		port = &pachip->a_port;

	/* We can invalidate up to 8 tlb entries in a go.  The flush
	   matches against <31:16> in the pci address.  
	   Note that gtlbi* and atlbi* are in the same place in the g_port
	   and a_port, respectively, so the g_port offset can be used
	   even if hose is an a_port */
	csr = &port->port_specific.g.gtlbia.csr;
	if (((start ^ end) & 0xffff0000) == 0)
		csr = &port->port_specific.g.gtlbiv.csr;

	/* For TBIA, it doesn't matter what value we write.  For TBI, 
	   it's the shifted tag bits.  */
	value = (start & 0xffff0000) >> 12;

	wmb();
	*csr = value;
	mb();
	*csr;
}

static int
titan_query_agp(titan_pachip_port *port)
{
	union TPAchipPCTL pctl;

	/* set up APCTL */
	pctl.pctl_q_whole = port->pctl.csr;

	return pctl.pctl_r_bits.apctl_v_agp_present;

}

static void __init
titan_init_one_pachip_port(titan_pachip_port *port, int index)
{
	struct pci_controller *hose;

	hose = alloc_pci_controller();
	if (index == 0)
		pci_isa_hose = hose;
	hose->io_space = alloc_resource();
	hose->mem_space = alloc_resource();

	/*
	 * This is for userland consumption.  The 40-bit PIO bias that we 
	 * use in the kernel through KSEG doesn't work in the page table 
	 * based user mappings. (43-bit KSEG sign extends the physical
	 * address from bit 40 to hit the I/O bit - mapped addresses don't).
	 * So make sure we get the 43-bit PIO bias.  
	 */
	hose->sparse_mem_base = 0;
	hose->sparse_io_base = 0;
	hose->dense_mem_base
	  = (TITAN_MEM(index) & 0xffffffffffUL) | 0x80000000000UL;
	hose->dense_io_base
	  = (TITAN_IO(index) & 0xffffffffffUL) | 0x80000000000UL;

	hose->config_space_base = TITAN_CONF(index);
	hose->index = index;

	hose->io_space->start = TITAN_IO(index) - TITAN_IO_BIAS;
	hose->io_space->end = hose->io_space->start + TITAN_IO_SPACE - 1;
	hose->io_space->name = pci_io_names[index];
	hose->io_space->flags = IORESOURCE_IO;

	hose->mem_space->start = TITAN_MEM(index) - TITAN_MEM_BIAS;
	hose->mem_space->end = hose->mem_space->start + 0xffffffff;
	hose->mem_space->name = pci_mem_names[index];
	hose->mem_space->flags = IORESOURCE_MEM;

	if (request_resource(&ioport_resource, hose->io_space) < 0)
		printk(KERN_ERR "Failed to request IO on hose %d\n", index);
	if (request_resource(&iomem_resource, hose->mem_space) < 0)
		printk(KERN_ERR "Failed to request MEM on hose %d\n", index);

	/*
	 * Save the existing PCI window translations.  SRM will 
	 * need them when we go to reboot.
	 */
	saved_config[index].wsba[0] = port->wsba[0].csr;
	saved_config[index].wsm[0]  = port->wsm[0].csr;
	saved_config[index].tba[0]  = port->tba[0].csr;

	saved_config[index].wsba[1] = port->wsba[1].csr;
	saved_config[index].wsm[1]  = port->wsm[1].csr;
	saved_config[index].tba[1]  = port->tba[1].csr;

	saved_config[index].wsba[2] = port->wsba[2].csr;
	saved_config[index].wsm[2]  = port->wsm[2].csr;
	saved_config[index].tba[2]  = port->tba[2].csr;

	saved_config[index].wsba[3] = port->wsba[3].csr;
	saved_config[index].wsm[3]  = port->wsm[3].csr;
	saved_config[index].tba[3]  = port->tba[3].csr;

	/*
	 * Set up the PCI to main memory translation windows.
	 *
	 * Note: Window 3 on Titan is Scatter-Gather ONLY.
	 *
	 * Window 0 is scatter-gather 8MB at 8MB (for isa)
	 * Window 1 is direct access 1GB at 2GB
	 * Window 2 is scatter-gather 1GB at 3GB
	 */
	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
	hose->sg_isa->align_entry = 8; /* 64KB for ISA */

	hose->sg_pci = iommu_arena_new(hose, 0xc0000000, 0x40000000, 0);
	hose->sg_pci->align_entry = 4; /* Titan caches 4 PTEs at a time */

	port->wsba[0].csr = hose->sg_isa->dma_base | 3;
	port->wsm[0].csr  = (hose->sg_isa->size - 1) & 0xfff00000;
	port->tba[0].csr  = virt_to_phys(hose->sg_isa->ptes);

	port->wsba[1].csr = __direct_map_base | 1;
	port->wsm[1].csr  = (__direct_map_size - 1) & 0xfff00000;
	port->tba[1].csr  = 0;

	port->wsba[2].csr = hose->sg_pci->dma_base | 3;
	port->wsm[2].csr  = (hose->sg_pci->size - 1) & 0xfff00000;
	port->tba[2].csr  = virt_to_phys(hose->sg_pci->ptes);

	port->wsba[3].csr = 0;

	/* Enable the Monster Window to make DAC pci64 possible.  */
	port->pctl.csr |= pctl_m_mwin;

	/*
	 * If it's an AGP port, initialize agplastwr.
	 */
	if (titan_query_agp(port)) 
		port->port_specific.a.agplastwr.csr = __direct_map_base;

	titan_pci_tbi(hose, 0, -1);
}

static void __init
titan_init_pachips(titan_pachip *pachip0, titan_pachip *pachip1)
{
	int pchip1_present = TITAN_cchip->csc.csr & 1L<<14;

	/* Init the ports in hose order... */
	titan_init_one_pachip_port(&pachip0->g_port, 0);	/* hose 0 */
	if (pchip1_present)
		titan_init_one_pachip_port(&pachip1->g_port, 1);/* hose 1 */
	titan_init_one_pachip_port(&pachip0->a_port, 2);	/* hose 2 */
	if (pchip1_present)
		titan_init_one_pachip_port(&pachip1->a_port, 3);/* hose 3 */
}

static void __init
titan_init_vga_hose(void)
{
#ifdef CONFIG_VGA_HOSE
	u64 *pu64 = (u64 *)((u64)hwrpb + hwrpb->ctbt_offset);

	if (pu64[7] == 3) {	/* TERM_TYPE == graphics */
		struct pci_controller *hose;
		int h = (pu64[30] >> 24) & 0xff;	/* console hose # */

		/*
		 * Our hose numbering matches the console's, so just find
		 * the right one...
		 */
		for (hose = hose_head; hose; hose = hose->next) {
			if (hose->index == h) break;
		}

		if (hose) {
			printk("Console graphics on hose %d\n", hose->index);
			pci_vga_hose = hose;
		}
	}
#endif /* CONFIG_VGA_HOSE */
}

void __init
titan_init_arch(void)
{
#if 0
	printk("%s: titan_init_arch()\n", __FUNCTION__);
	printk("%s: CChip registers:\n", __FUNCTION__);
	printk("%s: CSR_CSC 0x%lx\n", __FUNCTION__, TITAN_cchip->csc.csr);
	printk("%s: CSR_MTR 0x%lx\n", __FUNCTION__, TITAN_cchip->mtr.csr);
	printk("%s: CSR_MISC 0x%lx\n", __FUNCTION__, TITAN_cchip->misc.csr);
	printk("%s: CSR_DIM0 0x%lx\n", __FUNCTION__, TITAN_cchip->dim0.csr);
	printk("%s: CSR_DIM1 0x%lx\n", __FUNCTION__, TITAN_cchip->dim1.csr);
	printk("%s: CSR_DIR0 0x%lx\n", __FUNCTION__, TITAN_cchip->dir0.csr);
	printk("%s: CSR_DIR1 0x%lx\n", __FUNCTION__, TITAN_cchip->dir1.csr);
	printk("%s: CSR_DRIR 0x%lx\n", __FUNCTION__, TITAN_cchip->drir.csr);