idle.c
来自「优龙2410linux2.6.8内核源代码」· C语言 代码 · 共 333 行
C
333 行
/* * Idle daemon for PowerPC. Idle daemon will handle any action * that needs to be taken when the system becomes idle. * * Originally Written by Cort Dougan (cort@cs.nmt.edu) * * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com> * * Additional shared processor, SMT, and firmware support * Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */#include <linux/config.h>#include <linux/errno.h>#include <linux/sched.h>#include <linux/kernel.h>#include <linux/mm.h>#include <linux/smp.h>#include <linux/smp_lock.h>#include <linux/stddef.h>#include <linux/unistd.h>#include <linux/slab.h>#include <linux/interrupt.h>#include <linux/cpu.h>#include <asm/pgtable.h>#include <asm/uaccess.h>#include <asm/system.h>#include <asm/io.h>#include <asm/processor.h>#include <asm/mmu.h>#include <asm/cache.h>#include <asm/cputable.h>#include <asm/time.h>#include <asm/iSeries/LparData.h>#include <asm/iSeries/HvCall.h>#include <asm/iSeries/ItLpQueue.h>extern long cede_processor(void);extern long poll_pending(void);extern void power4_idle(void);int (*idle_loop)(void);#ifdef CONFIG_PPC_ISERIESunsigned long maxYieldTime = 0;unsigned long minYieldTime = 0xffffffffffffffffUL;static void yield_shared_processor(void){ unsigned long tb; unsigned long yieldTime; HvCall_setEnabledInterrupts(HvCall_MaskIPI | HvCall_MaskLpEvent | HvCall_MaskLpProd | HvCall_MaskTimeout); tb = get_tb(); /* Compute future tb value when yield should expire */ HvCall_yieldProcessor(HvCall_YieldTimed, tb+tb_ticks_per_jiffy); yieldTime = get_tb() - tb; if (yieldTime > maxYieldTime) maxYieldTime = yieldTime; if (yieldTime < minYieldTime) minYieldTime = yieldTime; /* * The decrementer stops during the yield. Force a fake decrementer * here and let the timer_interrupt code sort out the actual time. */ get_paca()->lppaca.xIntDword.xFields.xDecrInt = 1; process_iSeries_events();}int iSeries_idle(void){ struct paca_struct *lpaca; long oldval; unsigned long CTRL; /* ensure iSeries run light will be out when idle */ clear_thread_flag(TIF_RUN_LIGHT); CTRL = mfspr(CTRLF); CTRL &= ~RUNLATCH; mtspr(CTRLT, CTRL);#if 0 init_idle(); #endif lpaca = get_paca(); for (;;) { if (lpaca->lppaca.xSharedProc) { if (ItLpQueue_isLpIntPending(lpaca->lpqueue_ptr)) process_iSeries_events(); if (!need_resched()) yield_shared_processor(); } else { oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); if (!oldval) { set_thread_flag(TIF_POLLING_NRFLAG); while (!need_resched()) { HMT_medium(); if (ItLpQueue_isLpIntPending(lpaca->lpqueue_ptr)) process_iSeries_events(); HMT_low(); } HMT_medium(); clear_thread_flag(TIF_POLLING_NRFLAG); } else { set_need_resched(); } } schedule(); } return 0;}#endifint default_idle(void){ long oldval; while (1) { oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); if (!oldval) { set_thread_flag(TIF_POLLING_NRFLAG); while (!need_resched()) { barrier(); HMT_low(); } HMT_medium(); clear_thread_flag(TIF_POLLING_NRFLAG); } else { set_need_resched(); } schedule(); if (cpu_is_offline(smp_processor_id()) && system_state == SYSTEM_RUNNING) cpu_die(); } return 0;}#ifdef CONFIG_PPC_PSERIESDECLARE_PER_CPU(unsigned long, smt_snooze_delay);int dedicated_idle(void){ long oldval; struct paca_struct *lpaca = get_paca(), *ppaca; unsigned long start_snooze; unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); ppaca = &paca[smp_processor_id() ^ 1]; while (1) { /* Indicate to the HV that we are idle. Now would be * a good time to find other work to dispatch. */ lpaca->lppaca.xIdle = 1; oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); if (!oldval) { set_thread_flag(TIF_POLLING_NRFLAG); start_snooze = __get_tb() + *smt_snooze_delay * tb_ticks_per_usec; while (!need_resched()) { /* need_resched could be 1 or 0 at this * point. If it is 0, set it to 0, so * an IPI/Prod is sent. If it is 1, keep * it that way & schedule work. */ if (*smt_snooze_delay == 0 || __get_tb() < start_snooze) { HMT_low(); /* Low thread priority */ continue; } HMT_very_low(); /* Low power mode */ /* If the SMT mode is system controlled & the * partner thread is doing work, switch into * ST mode. */ if((naca->smt_state == SMT_DYNAMIC) && (!(ppaca->lppaca.xIdle))) { /* Indicate we are no longer polling for * work, and then clear need_resched. If * need_resched was 1, set it back to 1 * and schedule work */ clear_thread_flag(TIF_POLLING_NRFLAG); oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); if(oldval == 1) { set_need_resched(); break; } /* DRENG: Go HMT_medium here ? */ local_irq_disable(); /* SMT dynamic mode. Cede will result * in this thread going dormant, if the * partner thread is still doing work. * Thread wakes up if partner goes idle, * an interrupt is presented, or a prod * occurs. Returning from the cede * enables external interrupts. */ cede_processor(); } else { /* Give the HV an opportunity at the * processor, since we are not doing * any work. */ poll_pending(); } } } else { set_need_resched(); } HMT_medium(); lpaca->lppaca.xIdle = 0; schedule(); if (cpu_is_offline(smp_processor_id()) && system_state == SYSTEM_RUNNING) cpu_die(); } return 0;}int shared_idle(void){ struct paca_struct *lpaca = get_paca(); while (1) { if (cpu_is_offline(smp_processor_id()) && system_state == SYSTEM_RUNNING) cpu_die(); /* Indicate to the HV that we are idle. Now would be * a good time to find other work to dispatch. */ lpaca->lppaca.xIdle = 1; if (!need_resched()) { local_irq_disable(); /* * Yield the processor to the hypervisor. We return if * an external interrupt occurs (which are driven prior * to returning here) or if a prod occurs from another * processor. When returning here, external interrupts * are enabled. */ cede_processor(); } HMT_medium(); lpaca->lppaca.xIdle = 0; schedule(); } return 0;}#endifint cpu_idle(void){ idle_loop(); return 0; }int native_idle(void){ while(1) { if (!need_resched()) power4_idle(); if (need_resched()) schedule(); } return 0;}int idle_setup(void){#ifdef CONFIG_PPC_ISERIES idle_loop = iSeries_idle;#else if (systemcfg->platform & PLATFORM_PSERIES) { if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) { if (get_paca()->lppaca.xSharedProc) { printk("idle = shared_idle\n"); idle_loop = shared_idle; } else { printk("idle = dedicated_idle\n"); idle_loop = dedicated_idle; } } else { printk("idle = default_idle\n"); idle_loop = default_idle; } } else if (systemcfg->platform == PLATFORM_POWERMAC) { printk("idle = native_idle\n"); idle_loop = native_idle; } else { printk("idle_setup: unknown platform, use default_idle\n"); idle_loop = default_idle; }#endif return 1;}
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?