s3c2410.c

优龙2410linux2.6.8内核源代码

/* linux/arch/arm/mach-s3c2410/s3c2410.c
 *
 * Copyright (c) 2003 Simtec Electronics
 * Ben Dooks <[e-mail]>
 *
 * http://www.simtec.co.uk/products/EB2410ITX/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Modifications:
 *     16-May-2003 BJD  Created initial version
 *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
 *     05-Sep-2003 BJD  Moved to kernel v2.6
 *     18-Jan-2003 BJD  Added serial port configuration
*/

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>

#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-serial.h>

int s3c2410_clock_tick_rate = 12*1000*1000;  /* current timers at 12MHz */

/* serial port setup */

struct s3c2410_uartcfg *s3c2410_uartcfgs;

/* clock info */

unsigned long s3c2410_fclk;
unsigned long s3c2410_hclk;
unsigned long s3c2410_pclk;

#ifndef MHZ
#define MHZ (1000*1000)
#endif

#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)

#define IODESC_ENT(x) { S3C2410_VA_##x, S3C2410_PA_##x, S3C2410_SZ_##x, MT_DEVICE }

static struct map_desc s3c2410_iodesc[] __initdata = {
  IODESC_ENT(IRQ),
  IODESC_ENT(MEMCTRL),
  IODESC_ENT(USBHOST),
  IODESC_ENT(DMA),
  IODESC_ENT(CLKPWR),
  IODESC_ENT(LCD),
  IODESC_ENT(NAND),
  IODESC_ENT(UART),
  IODESC_ENT(TIMER),
  IODESC_ENT(USBDEV),
  IODESC_ENT(WATCHDOG),
  IODESC_ENT(IIC),
  IODESC_ENT(IIS),
  IODESC_ENT(GPIO),
  IODESC_ENT(RTC),
  IODESC_ENT(ADC),
  IODESC_ENT(SPI),
  IODESC_ENT(SDI),
  IODESC_ENT(CS8900)
};

static struct resource s3c_uart0_resource[] = {
	[0] = {
		.start = S3C2410_PA_UART0,
		.end   = S3C2410_PA_UART0 + 0x3fff,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = IRQ_S3CUART_RX0,
		.end   = IRQ_S3CUART_ERR0,
		.flags = IORESOURCE_IRQ,
	}

};

static struct resource s3c_uart1_resource[] = {
	[0] = {
		.start = S3C2410_PA_UART1,
		.end   = S3C2410_PA_UART1 + 0x3fff,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = IRQ_S3CUART_RX1,
		.end   = IRQ_S3CUART_ERR1,
		.flags = IORESOURCE_IRQ,
	}
};

static struct resource s3c_uart2_resource[] = {
	[0] = {
		.start = S3C2410_PA_UART2,
		.end   = S3C2410_PA_UART2 + 0x3fff,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = IRQ_S3CUART_RX2,
		.end   = IRQ_S3CUART_ERR2,
		.flags = IORESOURCE_IRQ,
	}
};

/* our uart devices */

static struct platform_device s3c_uart0 = {
	.name		  = "s3c2410-uart",
	.id		  = 0,
	.num_resources	  = ARRAY_SIZE(s3c_uart0_resource),
	.resource	  = s3c_uart0_resource,
};


static struct platform_device s3c_uart1 = {
	.name		  = "s3c2410-uart",
	.id		  = 1,
	.num_resources	  = ARRAY_SIZE(s3c_uart1_resource),
	.resource	  = s3c_uart1_resource,
};

static struct platform_device s3c_uart2 = {
	.name		  = "s3c2410-uart",
	.id		  = 2,
	.num_resources	  = ARRAY_SIZE(s3c_uart2_resource),
	.resource	  = s3c_uart2_resource,
};

static u64 fb_dma_mask = ~(u64)0;

static struct platform_device s3c_fb = {
	.name		  = "s3c2410fb",
	.id		  = 3,
	.dev		= {
 		.platform_data	= NULL,
		.dma_mask	= &fb_dma_mask,
		.coherent_dma_mask = 0xffffffff,
	},
	.num_resources	  = 0,
	.resource	  = NULL,
};

static struct platform_device s3c_ts = {
	.name		  = "s3c2410ts",
	.id		  = 4,
	.num_resources	  = 0,
	.resource	  = NULL,
};

static u64 uhc_dma_mask = ~(u64)0;

static struct platform_device s3c_uhc = {
	.name		  = "s3c2410-ohci",
	.id		  = 5,
	.dev		  = {
		.dma_mask	   = &uhc_dma_mask,
		.coherent_dma_mask = 0xffffffff,
	},
	.num_resources	  = 0,
	.resource	  = NULL,
};

static struct platform_device s3c_iis = {
	.name		  = "s3c2410-uda1341",
	.id		  = 6,
	.dev		  = {
		.dma_mask	   = &uhc_dma_mask,
		.coherent_dma_mask = 0xffffffff,
	},
	.num_resources	  = 0,
	.resource	  = NULL,
};

static struct platform_device *uart_devices[] __initdata = {
	&s3c_uart0,
	&s3c_uart1,
	&s3c_uart2,
	&s3c_fb,
	&s3c_ts,
	&s3c_uhc,
	&s3c_iis,
};

void __init s3c2410_map_io(struct map_desc *mach_desc, int size)
{
	unsigned long tmp;

	/* register our io-tables */

	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
	iotable_init(mach_desc, size);

	/* now we've got our machine bits initialised, work out what
	 * clocks we've got */

	s3c2410_fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), 12*MHZ);

	tmp = __raw_readl(S3C2410_CLKDIVN);
	//printk("tmp=%08x, fclk=%d\n", tmp, s3c2410_fclk);

	/* work out clock scalings */

	s3c2410_hclk = s3c2410_fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
	s3c2410_pclk = s3c2410_hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);

	/* print brieft summary of clocks, etc */

	printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
	       print_mhz(s3c2410_fclk), print_mhz(s3c2410_hclk),
	       print_mhz(s3c2410_pclk));
}


static int __init s3c2410_init(void)
{
	int ret;

	printk("S3C2410: Initialising architecture\n");

	ret = platform_add_devices(uart_devices, ARRAY_SIZE(uart_devices));

	return ret;
}

arch_initcall(s3c2410_init);