📄 config.c
字号:
/***************************************************************************//* * linux/arch/m68knommu/platform/5206/config.c * * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 2000-2001, Lineo Inc. (www.lineo.com) *//***************************************************************************/#include <linux/config.h>#include <linux/kernel.h>#include <linux/sched.h>#include <linux/param.h>#include <linux/init.h>#include <linux/interrupt.h>#include <asm/irq.h>#include <asm/dma.h>#include <asm/traps.h>#include <asm/machdep.h>#include <asm/coldfire.h>#include <asm/mcftimer.h>#include <asm/mcfsim.h>#include <asm/mcfdma.h>/***************************************************************************/void coldfire_tick(void);void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));unsigned long coldfire_timer_offset(void);void coldfire_trap_init(void);void coldfire_reset(void);/***************************************************************************//* * DMA channel base address table. */unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = { MCF_MBAR + MCFDMA_BASE0, MCF_MBAR + MCFDMA_BASE1,};unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];/***************************************************************************/void mcf_autovector(unsigned int vec){ volatile unsigned char *mbar; unsigned char icr; if ((vec >= 25) && (vec <= 31)) { vec -= 25; mbar = (volatile unsigned char *) MCF_MBAR; icr = MCFSIM_ICR_AUTOVEC | (vec << 3); *(mbar + MCFSIM_ICR1 + vec) = icr; vec = 0x1 << (vec + 1); mcf_setimr(mcf_getimr() & ~vec); }}/***************************************************************************/void mcf_settimericr(unsigned int timer, unsigned int level){ volatile unsigned char *icrp; unsigned int icr, imr; if (timer <= 2) { switch (timer) { case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break; default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break; } icrp = (volatile unsigned char *) (MCF_MBAR + icr); *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; mcf_setimr(mcf_getimr() & ~imr); }}/***************************************************************************/int mcf_timerirqpending(int timer){ unsigned int imr = 0; switch (timer) { case 1: imr = MCFSIM_IMR_TIMER1; break; case 2: imr = MCFSIM_IMR_TIMER2; break; default: break; } return (mcf_getipr() & imr);}/***************************************************************************/void config_BSP(char *commandp, int size){ mcf_setimr(MCFSIM_IMR_MASKALL);#if defined(CONFIG_BOOTPARAM) strncpy(commandp, CONFIG_BOOTPARAM_STRING, size); commandp[size-1] = 0;#else memset(commandp, 0, size);#endif mach_sched_init = coldfire_timer_init; mach_tick = coldfire_tick; mach_gettimeoffset = coldfire_timer_offset; mach_trap_init = coldfire_trap_init; mach_reset = coldfire_reset;}/***************************************************************************/
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -