⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 cache-sh4.c

📁 优龙2410linux2.6.8内核源代码
💻 C
字号:
/* $Id: cache-sh4.c,v 1.26 2004/02/19 12:47:24 lethal Exp $ * *  linux/arch/sh/mm/cache-sh4.c * * Copyright (C) 1999, 2000, 2002  Niibe Yutaka * Copyright (C) 2001, 2002, 2003, 2004  Paul Mundt * Copyright (C) 2003  Richard Curnow */#include <linux/config.h>#include <linux/init.h>#include <linux/mman.h>#include <linux/mm.h>#include <linux/threads.h>#include <asm/addrspace.h>#include <asm/page.h>#include <asm/pgtable.h>#include <asm/processor.h>#include <asm/cache.h>#include <asm/io.h>#include <asm/uaccess.h>#include <asm/pgalloc.h>#include <asm/mmu_context.h>#include <asm/cacheflush.h>extern void __flush_cache_4096_all(unsigned long start);static void __flush_cache_4096_all_ex(unsigned long start);extern void __flush_dcache_all(void);static void __flush_dcache_all_ex(void);int __init detect_cpu_and_cache_system(void){	unsigned long pvr, prr, cvr;	unsigned long size;	static unsigned long sizes[16] = {		[1] = (1 << 12),		[2] = (1 << 13),		[4] = (1 << 14),		[8] = (1 << 15),		[9] = (1 << 16)	};	pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffff;	prr = (ctrl_inl(CCN_PRR) >> 4) & 0xff;	cvr = (ctrl_inl(CCN_CVR));	/*	 * Setup some sane SH-4 defaults for the icache	 */	cpu_data->icache.way_incr	= (1 << 13);	cpu_data->icache.entry_shift	= 5;	cpu_data->icache.entry_mask	= 0x1fe0;	cpu_data->icache.sets		= 256;	cpu_data->icache.ways		= 1;	cpu_data->icache.linesz		= L1_CACHE_BYTES;	/*	 * And again for the dcache ..	 */	cpu_data->dcache.way_incr	= (1 << 14);	cpu_data->dcache.entry_shift	= 5;	cpu_data->dcache.entry_mask	= 0x3fe0;	cpu_data->dcache.sets		= 512;	cpu_data->dcache.ways		= 1;	cpu_data->dcache.linesz		= L1_CACHE_BYTES;	/* Set the FPU flag, virtually all SH-4's have one */	cpu_data->flags |= CPU_HAS_FPU;	/*	 * Probe the underlying processor version/revision and	 * adjust cpu_data setup accordingly.	 */	switch (pvr) {	case 0x205:		cpu_data->type = CPU_SH7750;		cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG;		break;	case 0x206:		cpu_data->type = CPU_SH7750S;		/* 		 * FIXME: This is needed for 7750, but do we need it for the		 * 7750S too? For now, assume we do.. -- PFM		 */		cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG;		break;	case 0x1100:		cpu_data->type = CPU_SH7751;		break;	case 0x8000:		cpu_data->type = CPU_ST40RA;		break;	case 0x8100:		cpu_data->type = CPU_ST40GX1;		break;	case 0x700:		cpu_data->type = CPU_SH4_501;		cpu_data->icache.ways = 2;		cpu_data->dcache.ways = 2;		/* No FPU on the SH4-500 series.. */		cpu_data->flags &= ~CPU_HAS_FPU;		break;	case 0x600:		cpu_data->type = CPU_SH4_202;		cpu_data->icache.ways = 2;		cpu_data->dcache.ways = 2;		break;	case 0x500 ... 0x501:		switch (prr) {		    case 0x10: cpu_data->type = CPU_SH7750R; break;		    case 0x11: cpu_data->type = CPU_SH7751R; break;		    case 0x50: cpu_data->type = CPU_SH7760;  break;		}		cpu_data->icache.ways = 2;		cpu_data->dcache.ways = 2;		break;	default:		cpu_data->type = CPU_SH_NONE;		break;	}	/*	 * On anything that's not a direct-mapped cache, look to the CVR	 * for I/D-cache specifics.	 */	if (cpu_data->icache.ways > 1) {		size = sizes[(cvr >> 20) & 0xf];		cpu_data->icache.way_incr	= size / cpu_data->icache.ways;		cpu_data->icache.sets		= (size >> 6);		cpu_data->icache.entry_mask	=			((size / cpu_data->icache.ways) - (1 << 5));	}	if (cpu_data->dcache.ways > 1) {		size = sizes[(cvr >> 16) & 0xf];		cpu_data->dcache.way_incr	= size / cpu_data->dcache.ways;		cpu_data->dcache.sets		= (size >> 6);		cpu_data->dcache.entry_mask	=			((size / cpu_data->dcache.ways) - (1 << 5));	}	return 0;}/* * SH-4 has virtually indexed and physically tagged cache. */struct semaphore p3map_sem[4];void __init p3_cache_init(void){	if (remap_area_pages(P3SEG, 0, PAGE_SIZE*4, _PAGE_CACHABLE))		panic("%s failed.", __FUNCTION__);	sema_init (&p3map_sem[0], 1);	sema_init (&p3map_sem[1], 1);	sema_init (&p3map_sem[2], 1);	sema_init (&p3map_sem[3], 1);}/* * Write back the dirty D-caches, but not invalidate them. * * START: Virtual Address (U0, P1, or P3) * SIZE: Size of the region. */void __flush_wback_region(void *start, int size){	unsigned long v;	unsigned long begin, end;	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)		& ~(L1_CACHE_BYTES-1);	for (v = begin; v < end; v+=L1_CACHE_BYTES) {		asm volatile("ocbwb	%0"			     : /* no output */			     : "m" (__m(v)));	}}/* * Write back the dirty D-caches and invalidate them. * * START: Virtual Address (U0, P1, or P3) * SIZE: Size of the region. */void __flush_purge_region(void *start, int size){	unsigned long v;	unsigned long begin, end;	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)		& ~(L1_CACHE_BYTES-1);	for (v = begin; v < end; v+=L1_CACHE_BYTES) {		asm volatile("ocbp	%0"			     : /* no output */			     : "m" (__m(v)));	}}/* * No write back please */void __flush_invalidate_region(void *start, int size){	unsigned long v;	unsigned long begin, end;	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)		& ~(L1_CACHE_BYTES-1);	for (v = begin; v < end; v+=L1_CACHE_BYTES) {		asm volatile("ocbi	%0"			     : /* no output */			     : "m" (__m(v)));	}}static void __flush_dcache_all_ex(void){	unsigned long addr, end_addr, entry_offset;	end_addr = CACHE_OC_ADDRESS_ARRAY + (cpu_data->dcache.sets << cpu_data->dcache.entry_shift) * cpu_data->dcache.ways;	entry_offset = 1 << cpu_data->dcache.entry_shift;	for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; addr += entry_offset) {		ctrl_outl(0, addr);	}}static void __flush_cache_4096_all_ex(unsigned long start){	unsigned long addr, entry_offset;	int i;	entry_offset = 1 << cpu_data->dcache.entry_shift;	for (i = 0; i < cpu_data->dcache.ways; i++, start += cpu_data->dcache.way_incr) {		for (addr = CACHE_OC_ADDRESS_ARRAY + start;		     addr < CACHE_OC_ADDRESS_ARRAY + 4096 + start;		     addr += entry_offset) {			ctrl_outl(0, addr);		}	}}void flush_cache_4096_all(unsigned long start){	if (cpu_data->dcache.ways == 1)		__flush_cache_4096_all(start);	else		__flush_cache_4096_all_ex(start);}/* * Write back the range of D-cache, and purge the I-cache. * * Called from kernel/module.c:sys_init_module and routine for a.out format. */void flush_icache_range(unsigned long start, unsigned long end){	flush_cache_all();}/* * Write back the D-cache and purge the I-cache for signal trampoline.  * .. which happens to be the same behavior as flush_icache_range(). * So, we simply flush out a line. */void flush_cache_sigtramp(unsigned long addr){	unsigned long v, index;	unsigned long flags; 	int i;	v = addr & ~(L1_CACHE_BYTES-1);	asm volatile("ocbwb	%0"		     : /* no output */		     : "m" (__m(v)));	index = CACHE_IC_ADDRESS_ARRAY | (v & cpu_data->icache.entry_mask);	local_irq_save(flags);	jump_to_P2();	for(i = 0; i < cpu_data->icache.ways; i++, index += cpu_data->icache.way_incr)		ctrl_outl(0, index);	/* Clear out Valid-bit */	back_to_P1();	local_irq_restore(flags);}static inline void flush_cache_4096(unsigned long start,				    unsigned long phys){	unsigned long flags; 	extern void __flush_cache_4096(unsigned long addr, unsigned long phys, unsigned long exec_offset);	/*	 * SH7751, SH7751R, and ST40 have no restriction to handle cache.	 * (While SH7750 must do that at P2 area.)	 */	if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG)	   || start < CACHE_OC_ADDRESS_ARRAY) {		local_irq_save(flags);		__flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0x20000000);		local_irq_restore(flags);	} else {		__flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0);	}}/* * Write back & invalidate the D-cache of the page. * (To avoid "alias" issues) */void flush_dcache_page(struct page *page){	if (test_bit(PG_mapped, &page->flags)) {		unsigned long phys = PHYSADDR(page_address(page));		/* Loop all the D-cache */		flush_cache_4096(CACHE_OC_ADDRESS_ARRAY,          phys);		flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x1000, phys);		flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x2000, phys);		flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x3000, phys);	}}static inline void flush_icache_all(void){	unsigned long flags, ccr;	local_irq_save(flags);	jump_to_P2();	/* Flush I-cache */	ccr = ctrl_inl(CCR);	ccr |= CCR_CACHE_ICI;	ctrl_outl(ccr, CCR);	back_to_P1();	local_irq_restore(flags);}void flush_cache_all(void){	if (cpu_data->dcache.ways == 1)		__flush_dcache_all();	else		__flush_dcache_all_ex();	flush_icache_all();}void flush_cache_mm(struct mm_struct *mm){	/* Is there any good way? */	/* XXX: possibly call flush_cache_range for each vm area */	/* 	 * FIXME: Really, the optimal solution here would be able to flush out	 * individual lines created by the specified context, but this isn't	 * feasible for a number of architectures (such as MIPS, and some	 * SPARC) .. is this possible for SuperH?	 *	 * In the meantime, we'll just flush all of the caches.. this	 * seems to be the simplest way to avoid at least a few wasted	 * cache flushes. -Lethal	 */	flush_cache_all();}static void __flush_cache_page(struct vm_area_struct *vma,			       unsigned long address,			       unsigned long phys){	/* We only need to flush D-cache when we have alias */	if ((address^phys) & CACHE_ALIAS) {		/* Loop 4K of the D-cache */		flush_cache_4096(			CACHE_OC_ADDRESS_ARRAY | (address & CACHE_ALIAS),			phys);		/* Loop another 4K of the D-cache */		flush_cache_4096(			CACHE_OC_ADDRESS_ARRAY | (phys & CACHE_ALIAS),			phys);	}	if (vma->vm_flags & VM_EXEC)		/* Loop 4K (half) of the I-cache */		flush_cache_4096(			CACHE_IC_ADDRESS_ARRAY | (address & 0x1000),			phys);}/* * Write back and invalidate D-caches. * * START, END: Virtual Address (U0 address) * * NOTE: We need to flush the _physical_ page entry. * Flushing the cache lines for U0 only isn't enough. * We need to flush for P1 too, which may contain aliases. */void flush_cache_range(struct vm_area_struct *vma, unsigned long start,		       unsigned long end){	unsigned long p = start & PAGE_MASK;	pgd_t *dir;	pmd_t *pmd;	pte_t *pte;	pte_t entry;	unsigned long phys;	unsigned long d = 0;	dir = pgd_offset(vma->vm_mm, p);	pmd = pmd_offset(dir, p);	do {		if (pmd_none(*pmd) || pmd_bad(*pmd)) {			p &= ~((1 << PMD_SHIFT) -1);			p += (1 << PMD_SHIFT);			pmd++;			continue;		}		pte = pte_offset_kernel(pmd, p);		do {			entry = *pte;			if ((pte_val(entry) & _PAGE_PRESENT)) {				phys = pte_val(entry)&PTE_PHYS_MASK;				if ((p^phys) & CACHE_ALIAS) {					d |= 1 << ((p & CACHE_ALIAS)>>12); 					d |= 1 << ((phys & CACHE_ALIAS)>>12);					if (d == 0x0f)						goto loop_exit;				}			}			pte++;			p += PAGE_SIZE;		} while (p < end && ((unsigned long)pte & ~PAGE_MASK));		pmd++;	} while (p < end); loop_exit:	if (d & 1)		flush_cache_4096_all(0);	if (d & 2)		flush_cache_4096_all(0x1000);	if (d & 4)		flush_cache_4096_all(0x2000);	if (d & 8)		flush_cache_4096_all(0x3000);	if (vma->vm_flags & VM_EXEC)		flush_icache_all();}/* * Write back and invalidate I/D-caches for the page. * * ADDR: Virtual Address (U0 address) */void flush_cache_page(struct vm_area_struct *vma, unsigned long address){	pgd_t *dir;	pmd_t *pmd;	pte_t *pte;	pte_t entry;	unsigned long phys;	dir = pgd_offset(vma->vm_mm, address);	pmd = pmd_offset(dir, address);	if (pmd_none(*pmd) || pmd_bad(*pmd))		return;	pte = pte_offset_kernel(pmd, address);	entry = *pte;	if (!(pte_val(entry) & _PAGE_PRESENT))		return;	phys = pte_val(entry)&PTE_PHYS_MASK;	__flush_cache_page(vma, address, phys);}/* * flush_icache_user_range * @vma: VMA of the process * @page: page * @addr: U0 address * @len: length of the range (< page size) */void flush_icache_user_range(struct vm_area_struct *vma,			     struct page *page, unsigned long addr, int len){	__flush_cache_page(vma, addr, PHYSADDR(page_address(page)));}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -