pnlhanttl_new_shotline.h

完整的软件学习--显示器驱动视频软件

// for Hannstar RSDS 15"
#define	PanelName	"HST 150SX84F"

#define PanelDither		6

#define PanelTTL		0xFF
#define PanelTCON		0
#define PanelLVDS		0
#define PanelRSDS		0

#define LVDS_TIMode			0
#define PanelDualPort		0xFF
#define PanelSwapPort		0xFF
#define PanelSwapOddML		0
#define PanelSwapEvenML		0
#define PanelSwapOddRB		0xFF
#define PanelSwapEvenRB		0xFF
#define PanelSwapMLSB		0

#define PanelDClkDelay		3
#define PanelInvDE			0
#define PanelInvDClk		0
#define PanelInvHSync		0
#define PanelInvVSync		0

// driving current setting 0==>4mA, 1==>6mA, 2==>8mA ,3==>12mA
#define PanelDCLKCurrent	1 // Dclk current
#define PanelDECurrent		1 // DE signal current
#define PanelOddDataCurrent	3// Odd data current
#define PanelEvenDataCurrent 3 // Even data current

#define PanelOnTiming1		200 // time between panel & data while turn on power
#define PanelOnTiming2		200 // time between data & back light while turn on power 
#define PanelOffTiming1		80 // time between back light & data while turn off power 
#define PanelOffTiming2		80 // time between data & panel while turn off power 

#define PanelHSyncWidth		32
#define PanelHSyncBackPorch	24

#define PanelVSyncWidth		2
#define PanelVSyncBackPorch	34

#define PanelHStart		(PanelHSyncWidth+PanelHSyncBackPorch)
#define PanelVStart		(PanelVSyncWidth+PanelVSyncBackPorch)
#define PanelWidth		1024
#define PanelHeight		768
#define PanelHTotal		1344
#define PanelVTotal		806

#define PanelMaxHTotal		1500
#define PanelMinHTotal		1200
#define PanelMaxVTotal		860
#define PanelMinVTotal		812
#define PanelDCLK			65
#define PanelMaxDCLK		86 //80 tony 20040109 for 720*350 mode
#define PanelMinDCLK		50

//=================================================================
// TCON	 setting for RSDS
#define TCON_Format1	0x1 // OFC1: control polarity & inversion
#define ESP_AfterData 	0 // Even Start Pulse after Data
#define ESP_Offset		0 // Even start pulse position
#define OSP_AfterData 	0 // Odd Start Pulse after Data
#define OSP_Offset		0 // Odd start pulse position

// driving current setting 0==>4mA, 1==>6mA, 2==>8mA ,3==>12mA
#define PanelOESPCurrent	2 // OSP/ESP drive current
#define PanelOEGCurrent	    2 // OPOL/EPOL/GPOL drive current
#define PanelEINVCurrent	2 // EINV drive current
#define PanelOINVCurrent	2 // OINV drive current

#define OuputFormat		(PUA_B |G0AT_B)//Enable Auto Toggle GPO0 & data invert
// POL
#define GPO0_VStart		0x000
#define GPO0_VEnd		0x000
#define GPO0_HStart		0x1E2
#define GPO0_HEnd		0x1E2
#define GPO0_Control	0x82
//LP
#define GPO1_VStart		0
#define GPO1_VEnd		0
#define GPO1_HStart		0x200	//0x204
#define GPO1_HEnd		0x238	//0x244
#define GPO1_Control	0x00

// STV
#define GPO2_VStart		0x000
#define GPO2_VEnd		0x001
#define GPO2_HStart		0
#define GPO2_HEnd		0
#define GPO2_Control	0x00

// CLKV
#define GPO3_VStart		0
#define GPO3_VEnd		0x000
#define GPO3_HStart		0x113
#define GPO3_HEnd		0x280
#define GPO3_Control	0x00

// OE
#define GPO4_VStart		0
#define GPO4_VEnd		0
#define GPO4_HStart		0x180
#define GPO4_HEnd		0x754
#define GPO4_Control	0

//PVS / FSYNC
#define GPO9_VStart		0x000
#define GPO9_VEnd		0x003
#define GPO9_HStart		0x000
#define GPO9_HEnd		0x000
#define GPO9_Control	0x00