pnlaues05.h

完整的软件学习--显示器驱动视频软件

// for AU RSDS 17"
#define	PanelName	"AU 170ES05"

#define PanelDither		6

#define PanelTTL		0
#define PanelTCON		0
#define PanelLVDS		0
#define PanelRSDS		0xFF

#define LVDS_TIMode		    0x00
#define PanelDualPort		0xFF
#define PanelSwapPort		0x0
#define PanelSwapOddML		0xFF
#define PanelSwapEvenML	    0xFF
#define PanelSwapOddRB		0xFF
#define PanelSwapEvenRB	    0xFF
#define PanelSwapMLSB		0xFF

#define PanelDClkDelay		0
#define PanelInvDClk		0
#define PanelInvDE		    0
#define PanelInvHSync		0
#define PanelInvVSync		0

// driving current setting 0==>4mA, 1==>6mA, 2==>8mA ,3==>12mA
#define PanelDCLKCurrent	1 // Dclk current
#define PanelDECurrent		1 // DE signal current
#define PanelOddDataCurrent	1 // Odd data current
#define PanelEvenDataCurrent	1 // Even data current

#define PanelOnTiming1		20//time between panel & data while turn on power
#define PanelOnTiming2		200//time between data & back light while turn on power 
#define PanelOffTiming1		120//time between back light & data while turn off power 
#define PanelOffTiming2		10//time between data & panel while turn off power 
#define PanelOffTiming0		0
#define PanelOnTiming0		0


#define PanelHSyncWidth	      32
#define PanelHSyncBackPorch	40

#define PanelVSyncWidth	       2
#define PanelVSyncBackPorch	34

#define PanelHStart		(PanelHSyncWidth+PanelHSyncBackPorch)
#define PanelVStart		(PanelVSyncWidth+PanelVSyncBackPorch)
#define PanelWidth		1280
#define PanelHeight		1024
#define PanelHTotal		1688
#define PanelVTotal		1066

#define PanelMaxHTotal		1800
#define PanelMinHTotal		1688
#define PanelMaxVTotal		2000
#define PanelMinVTotal		1042
#define PanelDCLK			108
#define PanelMaxDCLK		140
#define PanelMinDCLK		100

//=================================================================

#define TCON_Format1	0x1 // OFC1: control polarity & inversion
#define ESP_AfterData 	0 // Even Start Pulse after Data
#define ESP_Offset	1 // Even start pulse position
#define OSP_AfterData 	0 // Odd Start Pulse after Data
#define OSP_Offset	1 // Odd start pulse position

#define OuputFormat		G0AT_B//Enable Auto Toggle GPO0

// TCON	 setting for RSDS
// driving current setting 0==>4mA, 1==>6mA, 2==>8mA ,3==>12mA
#define PanelOESPCurrent	2//3 // OSP/ESP drive current
#define PanelOEGCurrent	    2 // OPOL/EPOL/GPOL drive current
#define PanelEINVCurrent	0 // EINV drive current
#define PanelOINVCurrent	0 // OINV drive current

// POL
#define GPO0_VStart		0x000
#define GPO0_VEnd		0x000
#define GPO0_HStart		643
#define GPO0_HEnd		643
#define GPO0_Control	0x82
//LP
#define GPO1_VStart		0x000
#define GPO1_VEnd		0x000
#define GPO1_HStart		654
#define GPO1_HEnd		746
#define GPO1_Control	0x00

//STV
#define GPO2_VStart		0x000
#define GPO2_VEnd		0x001
#define GPO2_HStart		195
#define GPO2_HEnd		195
#define GPO2_Control	0x00

//CLKV
#define GPO3_VStart		0x000
#define GPO3_VEnd		0x000
#define GPO3_HStart		554
#define GPO3_HEnd		132
#define GPO3_Control	0x00

//OE
#define GPO4_VStart		0x000
#define GPO4_VEnd		0x000
#define GPO4_HStart		539
#define GPO4_HEnd		654
#define GPO4_Control	1

#define GPO8_VStart		0x0
#define GPO8_VEnd		0x0
#define GPO8_HStart		0x0
#define GPO8_HEnd		0x0
#define GPO8_Control	0x0

//PVS / FSYNC
#define GPO9_VStart		0x0
#define GPO9_VEnd		0x0
#define GPO9_HStart		0x0
#define GPO9_HEnd		0x0
#define GPO9_Control	0x0

//HSYNC
#define GPOA_VStart		0x0
#define GPOA_VEnd		0x0
#define GPOA_HStart		0x0 
#define GPOA_HEnd		0x0 
#define GPOA_Control	0x0