cpu_init.s

来自「s3c6410的 Uboot 代码, 感兴趣的可以看看呀」· S 代码 · 共 146 行

/*
 *  cpu/s3c24xx/s3c2450/cpu_init.S
 *
 *  Memory controller and cache code for U-Boot
 *
 *  Copyright (c) 2006,  Samsung Electronics
 *  All rights reserved.
 *
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * $Id: cpu_init.S,v 1.3 2008/04/11 06:59:22 boyko Exp $
 */

#include <config.h>
#include <s3c2443.h>

/*
 * sdr_ram_asm_init: Initialize memory controller
 *
 * r0: input argument that contains memory setting value
 * r1: BANKCON1 Value
 * r2: BANKCON1 Value Modified
 * r3: Temp value
 * r4: MEMCON Base Address
 * r5-r11: setting value
 *
 */

	.globl sdr_ctrl_asm_init
sdr_ctrl_asm_init:
	mov	r1, pc
	ldr	r2, =0x00000fff
	orr	r1, r1, r2
	and	r0, r0, r1

	/* Set GPK port when using x32 bus width. */
	ldr	r2,=GPKCON_REG
	ldr	r1,=0xaaaaaaaa	@ set Sdata[31:16]
	str	r1, [r2]

	/* read setting value from structure */
	ldr	r4, =ELFIN_MEMCTL_BASE
	ldmia	r0!, {r5-r11}
	stmia	r4!, {r5-r9}

#ifdef CONFIG_PM
	/* compare INFORM2 register to confirm the dram type*/
	ldr	r1, =INFORM2_REG
	ldr	r1, [r1]
	ldr	r2, =0xDA
	cmp	r2, r1

	ldreq	r4, =ELFIN_MEMCTL_BASE
	beq	1002f
#endif

1000:	ldr	r4, =ELFIN_MEMCTL_BASE

	ldr	r1, [r4, #BANKCON1_OFFSET]
	bic	r1, r1, #INIT_MASK

	/* Step 1: issue PALL */
	orr	r2, r1, #INIT_PALL
	str	r2, [r4, #BANKCON1_OFFSET]

	/* Step 2: write 0xff into the refresh timer */
	mov	r3, #0xff
	str	r3, [r4, #REFRESH_OFFSET]

	/* Step 3: wait more than 120 clk */
	mov	r3, #0x100
1:	subs	r3, r3, #1
	bne	1b

	/* Step 4: issue MRS */
	orr	r2, r1, #INIT_MRS
	str	r2, [r4, #BANKCON1_OFFSET]

	/* Step 5: nornal operation value into the refresh timer */
	str	r9, [r4, #REFRESH_OFFSET]

	/* Step 6: issue EMRS */
	orr	r2, r1, #INIT_EMRS
	str	r2, [r4, #BANKCON1_OFFSET]

	/* Step 7: Normal Mode */
	orr	r2, r1, #INIT_NORMAL
	str	r2, [r4, #BANKCON1_OFFSET]

#ifdef CONFIG_SDRAM_AUTO_DETECT
	ldr	r6, =PHYS_SDRAM_1
	ldr	r7, =0x24564236
	swp	r8, r7, [r6]
	swp	r5, r8, [r6]
	cmp	r7, r5
	beq	1001f

1002:	stmia	r4!, {r10-r11}
	b	1000b

1001:
#endif

	mov	pc, lr

	.ltorg


/* Below code is for ARM920T */
	.globl cleanDCache
cleanDCache:
	mcr	p15, 0, r0, c7, c10, 2
	add	r0, r0, #(1<<5)
	tst	r0, #(1<<7)
	beq	cleanDCache
	bic	r0, r0, #(1<<7)
	adds	r0, r0, #(1<<26)

	bcc	cleanDCache
	mov	pc, lr

	.globl cleanFlushDCache
cleanFlushDCache:
	mcr	p15, 0, r0, c7, c14, 2
	add	r0, r0, #(1<<5)
	tst	r0, #(1<<7)
	beq	cleanFlushDCache
	bic	r0, r0, #(1<<7)
	adds	r0, r0, #(1<<26)

	bcc	cleanFlushDCache
	mov	pc, lr

	.globl cleanFlushCache
cleanFlushCache:
	mrc	p15, 0, pc, c7, c14, 3	/* test/cleanflush D-Cache */
	bne	cleanFlushCache
	mcr	p15, 0, r0, c7, c5, 0	/* flush I-Cache */
	mov	pc, lr

	.ltorg