sdmmc.h

IAR5.2下 AT91SAM9260 ARM 对 MCP2515 控制源化码

/* ----------------------------------------------------------------------------
 *         ATMEL Microcontroller Software Support  -  ROUSSET  -
 * ----------------------------------------------------------------------------
 * Copyright (c) 2006, Atmel Corporation

 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * - Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the disclaimer below in the documentation and/or
 * other materials provided with the distribution.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

#ifndef SDCARD_H
#define SDCARD_H

//------------------------------------------------------------------------------
//         Headers
//------------------------------------------------------------------------------

#include <mci/mci.h>

//------------------------------------------------------------------------------
//         Constants
//------------------------------------------------------------------------------

/// There was an error with the MCI driver.
#define SD_ERROR_MCI             1
/// The SD card did not answer the command.
#define SD_ERROR_NORESPONSE      2
/// The SD card did not answer the command.
#define SD_ERROR_NOT_INITIALIZED 3

/// SD card block size in bytes.
#define SD_BLOCK_SIZE           512
/// SD card block size binary shift value
#define SD_BLOCK_SIZE_BIT     9

//------------------------------------------------------------------------------
//         Macros
//------------------------------------------------------------------------------

// CSD register access macros.
#define SD_CSD(pSd, bitfield, bits)   ((((pSd)->csd)[3-(bitfield)/32] >> ((bitfield)%32)) & ((1 << (bits)) - 1))
#define SD_CSD_STRUCTURE(pSd)          SD_CSD(pSd, 126, 2) ///< CSD structure 00b  Version 1.0 01b version 2.0 High Cap
#define SD_CSD_TAAC(pSd)               SD_CSD(pSd, 112, 8) ///< Data read-access-time-1
#define SD_CSD_NSAC(pSd)               SD_CSD(pSd, 104, 8) ///< Data read access-time-2 in CLK cycles
#define SD_CSD_TRAN_SPEED(pSd)         SD_CSD(pSd, 96,  8) ///< Max. data transfer rate
#define SD_CSD_READ_BL_LEN(pSd)        SD_CSD(pSd, 80,  4) ///< Max. read data block length
#define SD_CSD_READ_BL_PARTIAL(pSd)    SD_CSD(pSd, 79,  1) ///< Bartial blocks for read allowed
#define SD_CSD_WRITE_BLK_MISALIGN(pSd) SD_CSD(pSd, 78,  1) ///< Write block misalignment
#define SD_CSD_READ_BLK_MISALIGN(pSd)  SD_CSD(pSd, 77,  1) ///< Read block misalignment
#define SD_CSD_DSR_IMP(pSd)            SD_CSD(pSd, 76,  1) ///< DSP implemented
#define SD_CSD_C_SIZE(pSd)             ((SD_CSD(pSd, 64,  10) << 2) + SD_CSD(pSd, 62,  2)) ///< Device size
#define SD_CSD_C_SIZE_HC(pSd)          ((SD_CSD(pSd, 64,  6) << 16) + SD_CSD(pSd, 48,  16)) ///< Device size v2.0 High Capacity
#define SD_CSD_VDD_R_CURR_MIN(pSd)     SD_CSD(pSd, 59,  3) ///< Max. read current @VDD min
#define SD_CSD_VDD_R_CURR_MAX(pSd)     SD_CSD(pSd, 56,  3) ///< Max. read current @VDD max
#define SD_CSD_VDD_W_CURR_MIN(pSd)     SD_CSD(pSd, 53,  3) ///< Max. write current @VDD min 
#define SD_CSD_VDD_W_CURR_MAX(pSd)     SD_CSD(pSd, 50,  3) ///< Max. write current @VDD max
#define SD_CSD_C_SIZE_MULT(pSd)        SD_CSD(pSd, 47,  3) ///< Device size multiplier 
#define SD_CSD_ERASE_BLK_EN(pSd)       SD_CSD(pSd, 46,  1) ///< Erase single block enable
#define SD_CSD_SECTOR_SIZE(pSd)        SD_CSD(pSd, 39,  7) ///< Erase sector size
#define SD_CSD_WP_GRP_SIZE(pSd)        SD_CSD(pSd, 32,  7) ///< Write protect group size
#define SD_CSD_WP_GRP_ENABLE(pSd)      SD_CSD(pSd, 31,  1) ///< write protect group enable
#define SD_CSD_R2W_FACTOR(pSd)         SD_CSD(pSd, 26,  3) ///< Write speed factor
#define SD_CSD_WRITE_BL_LEN(pSd)       SD_CSD(pSd, 22,  4) ///< Max write block length
#define SD_CSD_WRITE_BL_PARTIAL(pSd)   SD_CSD(pSd, 21,  1) ///< Partial blocks for write allowed 
#define SD_CSD_FILE_FORMAT_GRP(pSd)    SD_CSD(pSd, 15,  1) ///< File format group
#define SD_CSD_COPY(pSd)               SD_CSD(pSd, 14,  1) ///< Copy flag (OTP)
#define SD_CSD_PERM_WRITE_PROTECT(pSd) SD_CSD(pSd, 13,  1) ///< Permanent write protect 
#define SD_CSD_TMP_WRITE_PROTECT(pSd)  SD_CSD(pSd, 12,  1) ///< Temporary write protection
#define SD_CSD_FILE_FORMAT(pSd)        SD_CSD(pSd, 11,  2) ///< File format
#define SD_CSD_CRC(pSd)                SD_CSD(pSd,  1,  7) ///< CRC
#define SD_CSD_MULT(pSd)               (1 << (SD_CSD_C_SIZE_MULT(pSd) + 2))
#define SD_CSD_BLOCKNR(pSd)            ((SD_CSD_C_SIZE(pSd) + 1) * SD_CSD_MULT(pSd))
#define SD_CSD_BLOCKNR_HC(pSd)         ((SD_CSD_C_SIZE_HC(pSd) + 1) * 1024)
#define SD_CSD_BLOCK_LEN(pSd)          (1 << SD_CSD_READ_BL_LEN(pSd))
#define SD_CSD_TOTAL_SIZE(pSd)         (SD_CSD_BLOCKNR(pSd) * SD_CSD_BLOCK_LEN(pSd))
#define SD_CSD_TOTAL_SIZE_HC(pSd)      ((SD_CSD_C_SIZE_HC(pSd) + 1) * 512* 1024)
#define SD_TOTAL_SIZE(pSd)             ((pSd)->totalSize)
#define SD_TOTAL_BLOCK(pSd)            ((pSd)->blockNr)

// SCR register access macros.
#define SD_SCR_BUS_WIDTHS(pScr)        ((pScr[1] >> 16) & 0xF) ///< Describes all the DAT bus that are supported by this card
#define SD_SCR_BUS_WIDTH_4BITS         (1 << 1) ///< 4bit Bus Width is supported
#define SD_SCR_BUS_WIDTH_1BIT          (1 << 0) ///< 1bit Bus Width is supported

//------------------------------------------------------------------------------
//         Types
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
/// Sdcard driver structure. It holds the current command being processed and
/// the SD card address.
//------------------------------------------------------------------------------
typedef struct _SdCard {

    /// Pointer to the underlying MCI driver.
	Mci *pMci;
    /// Current MCI command being processed.
	MciCmd command;
    /// SD card current address.
	unsigned short cardAddress;
    /// Card-specific data.
	unsigned int csd[4];
    /// Previous access block number.
	unsigned int preBlock;
    /// State after sd command complete
    unsigned char state;
    /// Card type
    unsigned char cardType;
    /// Card total size
    unsigned int totalSize;
    /// Card block number
    unsigned int blockNr;

} SdCard;

//------------------------------------------------------------------------------
//         Global functions
//------------------------------------------------------------------------------

extern unsigned char SD_Init(SdCard *pSd, Mci *pMci);

extern unsigned char SD_ReadBlock(
    SdCard *pSd,
    unsigned int address,
    unsigned short nbBlocks,
    unsigned char *pData);

extern unsigned char SD_WriteBlock(
    SdCard *pSd,
    unsigned int address,
    unsigned short nbBlocks,
    const unsigned char *pData);

extern unsigned char SD_Stop(SdCard *pSd, Mci *pMci);

#endif //#ifndef SDCARD_H