⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 sata_nv.c

📁 LINUX 系统内如 清大家快去下载 这2个把 破 东西 要下载 还的上传 估计来的会很少清管理 考虑从
💻 C
📖 第 1 页 / 共 3 页
字号:
static void nv_sgpio_host_cleanup(struct nv_host *host);static bool nv_sgpio_update_led(struct nv_sgpio_led *led, bool *on_off);static void nv_sgpio_clear_all_leds(struct ata_port *ap);static bool nv_sgpio_send_cmd(struct nv_host *host, u8 cmd);static struct pci_driver nv_pci_driver = {	.name			= DRV_NAME,	.id_table		= nv_pci_tbl,	.probe			= nv_init_one,	.remove			= ata_pci_remove_one,};#ifdef SLES10static  struct scsi_host_template nv_sht = {#elsestatic  Scsi_Host_Template nv_sht = {#endif	.module			= THIS_MODULE,	.name			= DRV_NAME,#ifdef RHAS3U7	.detect			= ata_scsi_detect,	.release		= ata_scsi_release,#endif	.ioctl			= ata_scsi_ioctl,	.queuecommand		= ata_scsi_queuecmd,	.eh_strategy_handler	= ata_scsi_error,	.can_queue		= ATA_DEF_QUEUE,	.this_id		= ATA_SHT_THIS_ID,	.sg_tablesize		= LIBATA_MAX_PRD,	.max_sectors		= ATA_MAX_SECTORS,	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,#ifdef RHAS3U7	.use_new_eh_code	= ATA_SHT_NEW_EH_CODE,#endif	.emulated		= ATA_SHT_EMULATED,	.use_clustering		= ATA_SHT_USE_CLUSTERING,	.proc_name		= DRV_NAME,#ifndef RHAS3U7    	.dma_boundary		= ATA_DMA_BOUNDARY,	.slave_configure	= ata_scsi_slave_config,#endif	.bios_param		= ata_std_bios_param,};static struct ata_port_operations nv_ops = {	.port_disable		= ata_port_disable,	.tf_load		= ata_tf_load,	.tf_read		= ata_tf_read,	.exec_command		= ata_exec_command,	.check_status		= ata_check_status,	.dev_select		= ata_std_dev_select,	.phy_reset		= sata_phy_reset,	.bmdma_setup		= ata_bmdma_setup,	.bmdma_start		= ata_bmdma_start,	.bmdma_stop		= ata_bmdma_stop,	.bmdma_status		= ata_bmdma_status,	.qc_prep		= ata_qc_prep,	.qc_issue		= nv_qc_issue,	.eng_timeout		= ata_eng_timeout,	.irq_handler		= nv_interrupt,	.irq_clear		= ata_bmdma_irq_clear,	.scr_read		= nv_scr_read,	.scr_write		= nv_scr_write,	.port_start		= nv_port_start,	.port_stop		= nv_port_stop,	.host_stop		= nv_host_stop,};/* FIXME: The hardware provides the necessary SATA PHY controls * to support ATA_FLAG_SATA_RESET.  However, it is currently * necessary to disable that flag, to solve misdetection problems. * See http://bugme.osdl.org/show_bug.cgi?id=3352 for more info. * * This problem really needs to be investigated further.  But in the * meantime, we avoid ATA_FLAG_SATA_RESET to get people working. */static struct ata_port_info nv_port_info = {	.sht		= &nv_sht,	.host_flags	= ATA_FLAG_SATA |			  /* ATA_FLAG_SATA_RESET | */			  ATA_FLAG_SRST |			  ATA_FLAG_NO_LEGACY,	.pio_mask	= NV_PIO_MASK,	.mwdma_mask	= NV_MWDMA_MASK,	.udma_mask	= NV_UDMA_MASK,	.port_ops	= &nv_ops,};MODULE_AUTHOR("NVIDIA");MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller");MODULE_LICENSE("GPL");MODULE_DEVICE_TABLE(pci, nv_pci_tbl);MODULE_VERSION(DRV_VERSION);static irqreturn_t nv_interrupt (int irq, void *dev_instance,				 struct pt_regs *regs){	struct ata_host_set *host_set = dev_instance;	struct nv_host *host = host_set->private_data;	unsigned int i;	unsigned int handled = 0;	unsigned long flags;	spin_lock_irqsave(&host_set->lock, flags);	for (i = 0; i < host_set->n_ports; i++) {		struct ata_port *ap;		ap = host_set->ports[i];#ifdef ATA_FLAG_NOINTR        if (ap &&		    !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {#else        if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {#endif                struct ata_queued_cmd *qc;			qc = ata_qc_from_tag(ap, ap->active_tag);			if (qc && (!(qc->tf.ctl & ATA_NIEN)))				handled += ata_host_intr(ap, qc);			else				// No request pending?  Clear interrupt status				// anyway, in case there's one pending.				ap->ops->check_status(ap);		}	}	if (host->host_desc->check_hotplug)		host->host_desc->check_hotplug(host_set);	spin_unlock_irqrestore(&host_set->lock, flags);	return IRQ_RETVAL(handled);}static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg){	struct ata_host_set *host_set = ap->host_set;	struct nv_host *host = host_set->private_data;	if (sc_reg > SCR_CONTROL)		return 0xffffffffU;	if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)		return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4));	else		return inl(ap->ioaddr.scr_addr + (sc_reg * 4));}static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val){	struct ata_host_set *host_set = ap->host_set;	struct nv_host *host = host_set->private_data;	if (sc_reg > SCR_CONTROL)		return;	if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)		writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4));	else		outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));}static void nv_host_stop (struct ata_host_set *host_set){	struct nv_host *host = host_set->private_data;	// Disable hotplug event interrupts.	if (host->host_desc->disable_hotplug)		host->host_desc->disable_hotplug(host_set);	nv_sgpio_host_cleanup(host);	kfree(host);#ifdef RHAS3U7	ata_host_stop(host_set);#endif}static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent){	static int printed_version = 0;	struct nv_host *host;	struct ata_port_info *ppi;	struct ata_probe_ent *probe_ent;	int pci_dev_busy = 0;	int rc;	u32 bar;        // Make sure this is a SATA controller by counting the number of bars        // (NVIDIA SATA controllers will always have six bars).  Otherwise,        // it's an IDE controller and we ignore it.	for (bar=0; bar<6; bar++)		if (pci_resource_start(pdev, bar) == 0)			return -ENODEV;	if (!printed_version++)		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");	rc = pci_enable_device(pdev);	if (rc)		goto err_out;	rc = pci_request_regions(pdev, DRV_NAME);	if (rc) {		pci_dev_busy = 1;		goto err_out_disable;	}	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);	if (rc)		goto err_out_regions;#ifndef RHAS3U7    rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);	if (rc)		goto err_out_regions;#endif	rc = -ENOMEM;	ppi = &nv_port_info;  probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY|ATA_PORT_SECONDARY);  if (!probe_ent)		goto err_out_regions;	host = kmalloc(sizeof(struct nv_host), GFP_KERNEL);	if (!host)		goto err_out_free_ent;	memset(host, 0, sizeof(struct nv_host));	host->host_desc = &nv_device_tbl[ent->driver_data];	probe_ent->private_data = host;	if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM)		host->host_flags |= NV_HOST_FLAGS_SCR_MMIO;	if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) {		unsigned long base;		probe_ent->mmio_base = ioremap(pci_resource_start(pdev, 5),				pci_resource_len(pdev, 5));		if (probe_ent->mmio_base == NULL) {			rc = -EIO;			goto err_out_free_host;		}		base = (unsigned long)probe_ent->mmio_base;		probe_ent->port[0].scr_addr =			base + NV_PORT0_SCR_REG_OFFSET;		probe_ent->port[1].scr_addr =			base + NV_PORT1_SCR_REG_OFFSET;	} else {		probe_ent->port[0].scr_addr =			pci_resource_start(pdev, 5) | NV_PORT0_SCR_REG_OFFSET;		probe_ent->port[1].scr_addr =			pci_resource_start(pdev, 5) | NV_PORT1_SCR_REG_OFFSET;	}	pci_set_master(pdev);#ifdef RHAS3U7	ata_add_to_probe_list(probe_ent);    	    	if (nv_sgpio_capable(ent))		nv_sgpio_init(pdev, host);	// Enable hotplug event interrupts.	if (host->host_desc->enable_hotplug)		host->host_desc->enable_hotplug(probe_ent);	return 0;#else    	rc = ata_device_add(probe_ent);	if (rc != NV_PORTS)		goto err_out_iounmap;    	    	if (nv_sgpio_capable(ent))		nv_sgpio_init(pdev, host);	// Enable hotplug event interrupts.	if (host->host_desc->enable_hotplug)		host->host_desc->enable_hotplug(probe_ent);	kfree(probe_ent);	return 0;err_out_iounmap:	if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)		iounmap(probe_ent->mmio_base);#endiferr_out_free_host:	kfree(host);err_out_free_ent:	kfree(probe_ent);err_out_regions:	pci_release_regions(pdev);err_out_disable:	if (!pci_dev_busy)		pci_disable_device(pdev);err_out:	return rc;}static int nv_port_start(struct ata_port *ap){	int stat;    	struct nv_port *port;    	stat = ata_port_start(ap);    	if (stat) {        	return stat;    	}    	port = kmalloc(sizeof(struct nv_port), GFP_KERNEL);    	if (!port) 		goto err_out_no_free;	memset(port, 0, sizeof(struct nv_port));    	ap->private_data = port;    	return 0;err_out_no_free:    	return 1;}static void nv_port_stop(struct ata_port *ap){	nv_sgpio_clear_all_leds(ap);	if (ap->private_data) {		kfree(ap->private_data);		ap->private_data = NULL;	}	ata_port_stop(ap);}static int nv_qc_issue(struct ata_queued_cmd *qc){	struct nv_port *port = qc->ap->private_data;	if (port) 		port->port_sgpio.activity.flags.recent_activity = 1;	return (ata_qc_issue_prot(qc));}static void nv_enable_hotplug(struct ata_probe_ent *probe_ent){	u8 intr_mask;	outb(NV_INT_STATUS_HOTPLUG,		probe_ent->port[0].scr_addr + NV_INT_STATUS);	intr_mask = inb(probe_ent->port[0].scr_addr + NV_INT_ENABLE);	intr_mask |= NV_INT_ENABLE_HOTPLUG;	outb(intr_mask, probe_ent->port[0].scr_addr + NV_INT_ENABLE);}static void nv_disable_hotplug(struct ata_host_set *host_set){	u8 intr_mask;	intr_mask = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);	intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);	outb(intr_mask, host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);}static void nv_check_hotplug(struct ata_host_set *host_set){	u8 intr_status;	intr_status = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);	// Clear interrupt status.	outb(0xff, host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);	if (intr_status & NV_INT_STATUS_HOTPLUG) {		if (intr_status & NV_INT_STATUS_PDEV_ADDED)			printk(KERN_WARNING "nv_sata: "				"Primary device added\n");		if (intr_status & NV_INT_STATUS_PDEV_REMOVED)			printk(KERN_WARNING "nv_sata: "				"Primary device removed\n");		if (intr_status & NV_INT_STATUS_SDEV_ADDED)			printk(KERN_WARNING "nv_sata: "				"Secondary device added\n");		if (intr_status & NV_INT_STATUS_SDEV_REMOVED)			printk(KERN_WARNING "nv_sata: "				"Secondary device removed\n");	}}static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent){	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);	u8 intr_mask;	u8 regval;	pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);	regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;	pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);	writeb(NV_INT_STATUS_HOTPLUG, probe_ent->mmio_base + NV_INT_STATUS_CK804);	intr_mask = readb(probe_ent->mmio_base + NV_INT_ENABLE_CK804);	intr_mask |= NV_INT_ENABLE_HOTPLUG;	writeb(intr_mask, probe_ent->mmio_base + NV_INT_ENABLE_CK804);}static void nv_disable_hotplug_ck804(struct ata_host_set *host_set){	struct pci_dev *pdev = to_pci_dev(host_set->dev);	u8 intr_mask;

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -