menudesc.1

Triangular mesh processing tool, currently very few people use this software, but it allows us to gr

  Copyright (C) 1991-1998 by XYZ Scientific Applications, Inc.
  UNPUBLISHED - All rights reserved under the copyright laws
  of the United States.  All rights reserved worldwide.
ANALYSIS:|Analysis| Options for Supported Output Formats
 ABAQOPTS:|ABAQ|US Output |Opt|ion|s|
 ABAQSTEP:|ABAQ|US |Step|s
 ANSYOPTS:|ANSY|S Output |Opt|ion|s|
 COMMENT:Add a |Comment| to the Mesh Output File
 DYNAOPTS:|DYNA|3D Output |Opt|ion|s|
 ES3DOPTS:|E|lectro|s|tatic TOPAZ|3D| Output |Opt|ion|s|
 MARCOPTS:|MARC| Output |Opt|ion|s|
 NASTOPTS:|NAST|RAN Output |Opt|ion|s|
 NEKOPTS:|NEK|TON 2D and 3D Output |Opt|ion|s|
 NIKEOPTS:|NIKE| Output |Opt|ion|s|
 LSNKOPTS:|LS|-|N|I|K|E Output |Opt|ion|s|
 LSDYOPTS:|LS|-|DY|NA Output |Opt|ion|s|
 TZ3DOPTS:|T|OPA|Z3D| Output |Opt|ion|s|
BOUNDARY:Detonation, Joint, Plane and Wall Conditions
 DETP:Create |Det|onation |P|oints and Lighting Times
 JD:|J|oint |D|efinition Command
 JTINFO:|J|oin|t| Definition |Info|rmation
 MPC:|M|ultiple |P|oint |C|onstraint of a Set of Nodes
 LSYS:|L|ocal Coordinate |Sys|tem Definition
 LSYSINFO:|L|ocal Coordinate |Sys|tem Definition |Info|rmation
 PLANE:Boundary |Plane| Definition (Symmetry, Stone Wall)
 PLINFO:|Pl|ane Definition |Info|rmation
 TRP:|Tr|acer |P|articles
CAD:Import |CAD|/CAM Data Via IGES
 IGES:Extract All Entities from an |IGES| File
 IGESCD:Convert |IGES| Entities to TrueGrid |C|urve |D|efinitions
 IGESFILE:Selectively Extract Entities from an |IGES| |File|
 IGESLBLS:Toggle the Use of |IGES| |L|a|b|e|ls|
 IGESPD:Convert |IGES| Planes to TrueGrid |P|lane |D|efinitions
 IGESSD:Convert |IGES| Surfaces to TrueGrid |S|urface |D|efinitions
 NURBSD:Convert |IGES| |NURB|Ss to TrueGrid |S|urface |D|efinitions
 SAVEIGES:|Save| Processed |IGES| Entities to a Binary File
 USEIGES:|Use| Processed |IGES| Entities Stored in a Binary File
 VPSD:Convert |V|iew|p|oint Data to TrueGrid |S|urface |D|efinitions
 WIGES:|W|rite an |IGES| file
 WRSD:|Wr|ite |S|urface |D|efinitions in the Viewpoint Format
 TRIMMING:Turn IGES |Trimmed| Surfaces On or Off
 LTRIM:|L|ength of Work Space for |Trim|ming Surfaces
2D CURVE:Define and Edit |2D Curve|s
 APLD:Begin |Ap|pending to the Current |L|ine |D|efinition
 CKL:|C|hec|k| the Curvature in a Sequence of 2D |L|ine Definitions
 DNDD:|D|isplay a |N|odal |D|istribution |D|ensity Function
 EDGEFILE:Convert Data in an "|Edge| |File|" to 2D Line Definitions
 LCC:Multiple |L|ine Definitions: |C|on|c|entric Arcs
 LCD:|L|oad |C|urve |D|efintion
 LCINFO:|L|oad |C|urve |Info|rmation
 LCV:|L|oad |C|urve Option: |V|iew the Load Curve
 LRL:Multiple |L|ine Definitions: Create |R|adiating |L|ines
 LD:|L|ine |D|efinition Command
 LDINFO:|L|ine |D|efinition |Info|rmation
 LDPRNT:|L|ine |D|efinition: |Pr|i|nt| the Coordinates
 LD3D2D:|L|ine |D|efinition: Convert |3D| Curves to |2D| Curves
 LSCA:|L|ine Definition: |Sc|ale |A|ll Coordinates
 LSCX:|L|ine Definition: |Sc|ale the |X|-Coordinates
 LSCZ:|L|ine Definition: |Sc|ale the |Z|-Coordinates
 LT:|L|ine Definition: |T|ranslate Coordinates
 LROT:|L|ine Definition: |Rot|ate Coordinates
 LV:|L|ine Definition: |V|iew the Curve
 LVI:|L|ine Definition: |V|iew a L|i|st of Curves
 LVS:|L|ine Definition: |V|iew a |S|equence of Curves
 MAZT: |Maz|e Like 2D Curve Intersection |T|olerance
 NDD:Define a |N|odal |D|istribution |D|ensity Function
 FLCD:|F|unctional |L|oad |C|urve |D|efinition
 GSET:2D Curves |G|raphics Window Dimensions |Set|
 RLN:|R|ead the Next |L|i|n|e Definition from an Edge File
 RLNS:|R|ead a Sequence of |L|i|n|e Definition|s| from an Edge File
 DELLD:|Del|ete a 2D (|L|ine) Curve |D|efinition
 DELLDS:|Del|ete a List of 2D (|L|ine) Curve |D|efinition|s|
3D CURVE:Define and Edit |3D Curve|s
 APCURD:|Ap|pend to a 3D |Cur|ve |D|efintion
 CDINFO:3D |C|urve |D|efinition |Info|rmation
 CURD:3D |Cur|ve |D|efinition
 DELCD:|Del|ete a 3D |C|urve |D|efinition
 DELCDS:|Del|ete a List of 3D |C|urve |D|efinition|s|
 RMSEG:|R|e|m|ove the Last |Seg|ment Appended to the Last 3D Curve
ELEMENT:Define |Element| Properties
 BIND:Hughes-Liu |B|eam |In|tegration Points |D|efinition
 BSD:Global |B|eam Element Cross |S|ection |D|efinition
 BSINFO:|B|eam Cross |S|ection Definition |Info|rmation
 LSBSD:|L|i|s|t All |B|eam Cross |S|ection |D|efinitions
 OFFSET:Add an |Offset| to the Node or Element Numbering
 SIND:|S|hell |In|tegration Rule |D|efinition
GRAPHICS:Set |Graphics| Defaults
 CAPTION:Change the |Caption| for the Physical Picture
 GRID:Add or Remove a Reference |Grid| for the Physical Picture
 NOPLOT:Allow |No| |Plot|ting of Graphics
 PLOT:Turn |Plot|ting Back On
 POSTSCRIPT:Direct Pictures to a |PostScript| File
 RINDEX:Turn the I-J-K |R|educed |Index| Labels On or Off
 TRIAD:Turn the X-Y-Z |Triad| On or Off
 SET:|Set| Certain Graphics Defaults
VEL/ACC:Set Global |Vel|ocity and |Acc|eleration
 ROTATION:Specify a Global Rigid Body |Rotation|
 VELOCITY:Specify a Global Rigid Body |Velocity|
MATERIAL:Create |Material| Definitions
 ABAQMATS:Set-up for |ABAQ|US |Mat|erial|s|
 ANSYMATS:Set-up for |ANSY|S |Mat|erial|s| and Elements
 ANSYNL:Specify |ANSY|S |N|on-|L|inear Material Properties
 DELMATS:|Del|ete a |Mat|erial Model|s|
 DYNAEOS:Specify |DYNA|3D |E|quation |o|f |S|tate Models
 DYNAMATS:Set-up for |DYNA|3D |Mat|erial|s|
 ES3DMATS:Set-up for |E|lectro|s|tatic TOPAZ|3D| |Mat|erial|s|
 FLUEMATS:Set-up for |FLUENT| |Mat|erial|s|
 LSDYMATS:Set-up for |LS|-|DY|NA3D |Mat|erial|s|
 LSDYEOS:Specify |LS|-|DY|NA3D |E|quation |o|f |S|tate Models
 LSNKMATS:Set-up for |LS|-|N|I|K|E3D |Mat|erial|s|
 MARCMATS:Set-up for |MARC| |Mat|erial|s|
 MATE:Set the (Default) Global |Mate|rial Number
 NASTMATS:Set-up for |NAST|RAN |Mat|erial|s|
 NIKEMATS:Set-up for |NIKE|3D |Mat|erial|s|
 PATMATS:Set-up for |PAT|RAN |Mat|erial|s|
 RHO:Specify the Density(|Rho|) of a Material
 SHSO:|Sh|ells Tied to |So|lids Constraint
 TMM:Set |T|otal |M|ass of a |M|aterial
 TZ3DMATS:Set-up for |T|OPA|Z3D| |Mat|erial|s|
MERGING:Specify Tolerances for Node |Merging|
 BPTOL:|B|etween |P|arts |Tol|erance
 MERGE:Enter the |Merge| Phase of TrueGrid
 PTOL:|P|art |Tol|erance (within a Single Part)
 RIGBM:Merge Two |Rig|id |B|ody |M|aterials as One
 ST:|S|urface |T|olerance (No Printout)
 STP:|S|urface |T|olerance with |P|rintout
 T:|T|olerance for All Nodes (No Printout)
 TP:|T|olerance for All Nodes (with |P|rintout)
 ZTOL:Minimum Absolute (|Z|ero) |Tol|erance
 MNS:|M|erge |N|ode |S|et Overrides Sliding Interface Constraint
MISC:Comments, Calculator, Parameters, INCLUDE Directive, etc.
 BECHO:|Echo| a String to the Text Window and Beep
 C:Add a |C|omment to the Session File
 CRPROD:|Cr|oss |Prod|uct of Two Vectors
 CURTYP:|Cur|ve Attach Button |Typ|e
 DC:|D|esk Top |C|alculator
 DISTANCE: |Distance| Between Two Points
 ECHO:|Echo| a String to the Text Window
 ELSE:Final Option in an IF..ELSEIF..|ELSE|..ENDIF Control Statement
 ELSEIF:Add Option to an IF..|ELSEIF|..ELSE..ENDIF Control Statement
 ENDIF:End an IF..ELSEIF..ELSE..|ENDIF| Control Statement
 END:|End| the Current TrueGrid Session
 ERRMOD:|Err|or |Mod|e Selection
 expressions:Not a Command - Information about Allowable |Expressions|
 IF:Begin an |IF|..ELSEIF..ELSE..ENDIF Control Statement
 INCLUDE:|Include| Directive for TrueGrid Input Files
 INPROD:|In|ner |Prod|uct of Two Vectors
 INTYP:Default |In|terpolation |Typ|e
 MXP:|M|a|x|imum Number of |P|asses in the Projection Algorithm
 PAINFO:|Pa|rameter |Info|rmation
 PARA:|Para|meter Definition Command
 RESUME:|Resume| Execution of an "Interrupted" Input File
 SUBANG: |Ang|le |Sub|tended by Two Intersecting Lines
 TITLE:Define a |Title| for the Current Meshing Problem
 TPARA:|T|yped |Para|meter Definition Command
 TRICENT:|Tri|angle Angular |Cent|er
PARTS:Create |Parts|
 BEAM:Creates a |Beam| Part (No Graphics Available)
 BLOCK:Creates a Cartesian |Block| Mesh
 BLUDE:Creates a |Bl|ock Extr|ude|d Face Set
 CBEAM:Creates a |C|ylindrical Coordinate |Beam| Part
 CYLINDER:Creates a Cylindrical-Coordinate Block Mesh
 LINEAR:Create |Linear| Elements for Subsequent Parts
 PARTMODE:Change the Syntax of the BLOCK and CYLINDER Commands
 PINFO:|P|art |Info|rmation
 QUADRATIC:Create |Quadratic| Elements for Subsequent Parts
 READMESH:|Read| a File Containing a |Mesh|
OUTPUT:Specify Mesh |Output| File Format
 ABAQUS:Specify Output to be an |ABAQUS| Mesh File
 ALE3D:Specify Output to be an |ALE3D| Mesh File
 ANSYS:Specify Output to be an |ANSYS| Mesh File
 AUTODYN:Specify Output to be an |AUTODYN| Mesh File
 REFLEQS:Specify Output to be a |REFLEQS| Mesh File
 CF3D:|C|onvective |F|low |O|utput
 CFD-ACE:Specify Output to be a |CFD-ACE| Mesh File
 CRC:Specify Output to be a |CRC| Format Mesh File
 DYNA3D:Specify Output to be a LLNL |DYNA3D| Mesh File
 ES3D:Specify Output to be an |E|lectro|S|tatic TOPAZ|3D| Mesh File
 EXODUSII:Specify Output to be a SANDIA |EXODUSII| Mesh File
 FIDAP:Specify Output to be a |FIDAP| Neutral File
 CFX4:Specify Output to be a |CFX4| Mesh File
 FLUENT:Specify Output to be a |FLUENT| Mesh File
 GEMINI:Specify Output to be a |GEMINI| Mesh File
 GILA:Specify Output to be a |GILA| Mesh File
 GRIDGEN3D:Specify Output to be a |GRIDGEN| Mesh File
 IRI:Specify Output to be an |I|nnovative |R|esearch |I|nc. Grid File
 LSDYNA:Specify Output to be a |LS-DYNA| Mesh File
 LSNIKE:Specify Output to be a |LS-NIKE3D| Mesh File
 MARC:Specify Output to be a |MARC| Mesh File
 NASTRAN:Specify Output to be an MSC |NASTRAN| Mesh File
 NDIGITS:|N|umber of |Digits| in Writing ALE3D Output
 NEKTON2D:Specify Output to be a |NEKTON2D| Mesh File
 NEKTON3D:Specify Output to be a |NEKTON3D| Mesh File
 NEUTRAL:Specify Output to be a PATRAN |NEUTRAL| File
 NIKE3D:Specify Output to be a |NIKE3D| Mesh File
 PLOT3D:Specify Output to be a |PLOT3D| Mesh File
 POLY3D:Specify Output to be a |POLY3D| Mesh File
 SAMI:|SAMI| Output Format
 SAVE:Update the Current Session File and |Save| to Disk
 STARCD:Specify Output to be a |STARCD| File
 TASCFLOW:Specify Output to be a |TASCFLOW| Mesh File
 TOPAZ3D:Specify Output to be a |TOPAZ3D| Mesh File
 VERBATIM:Write |Verbatim| to the Output File
 VIEWPOINT:Specify |Viewpoint| Data Lab Format
RADIATION:Specify Global Temperature
 BFD: |B|ulk |F|luid |D|efinition
 TEMP:Specify a Default Global |Temp|erature
REPLICATE:Commands to Globally and Locally |Replicate| Parts
 GCT:Define |G|lobal |C|oordinate |T|ransformations
 LCT:Define |L|ocal |C|oordinate |T|ransformations
 GMI:|G|lobal |M|aterial |I|ncrement
 LMI:|L|ocal |M|aterial |I|ncrement
 GSII:|G|lobal |S|liding |I|nterface |I|ncrement
 LSII:|L|ocal |S|liding |I|nterface |I|ncrement
 LEV:Create a Set of Transformations for Global Replication
 PPLV:|P|o|p|s a |L|e|v|el of Transformations Off the Stack
 PSLV:|P|u|s|hes a |L|e|v|el of Transformations Onto the Stack
SETS:Define |Sets| of Nodes, Faces, and Elements
 DELSET:|Del|ete a |Set|
 ESETC:Write an |E|lement |Set| |C|omment
 FSETC:Write a |F|ace |Set| |C|omment
 NSETC:Write a |N|ode |Set| |C|omment
 NSETINFO:|N|ode |Sets| |Info|rmation
TRANSFORM:|Transform| Parts by Rotation, Translation, Scaling
 GEXCH:|G|lobal |Exch|ange of Coordinates
 EXCH:Permute (|Exch|ange) Coordinates of Subsequent Parts
 NERL:|N|ode and |E|lement Numbering |R|u|l|e
 XSCA:|X|-Coordinate |Sca|ling of Subsequent Parts
 XOFF:|X|-Coordinate |Off|set of Subsequent Parts
 YSCA:|Y|-Coordinate |Sca|ling of Subsequent Parts
 YOFF:|Y|-Coordinate |Off|set of Subsequent Parts
 ZSCA:|Z|-Coordinate |Sca|ling of Subsequent Parts
 ZOFF:|Z|-Coordinate |Off|set of Subsequent Parts
 CSCA:|C|oordinate |Sca|ling of Subsequent Parts
INTERFACE:Define Mesh |Interface|s
 GETBB:|Get| a Saved |B|lock |B|oundary Interface
 SID:|S|liding |I|nterface |D|efinition
 SIINFO:|S|liding |I|nterface |Info|rmation
SPRING/MASS:Define |Spring|s, Dampers, and Point |Mass|es
 SPD:|Sp|ring and Damper Property |D|efinition
 SPINFO:|Sp|ring and Damper |Info|rmation
SURFACE:Define |Surface|s (and Other Misc. Options)
 ACCURACY:Reset the |Accuracy| of the Projection Method
 COOREF:|Coo|rdinate |Ref|erence in the TSAVE File
 LOCATE:Coordinates of a Point on a Surface or 3D Curve
 LASD:|L|ist |A|ll Graphically Active |S|urface |D|efinitions
 MVPN:|M|odify a |V|iew|p|oint Surface |N|ode
 PROJECT:|Project| a Specified Point to a Surface or Surfaces
 PURGE:|Purge| Memory of the 3D Curves and Surfaces
 PVPN:|P|osition a |V|iew|p|oint Surface |N|ode
 SD:|S|urface |D|efinition
 SDINFO:|S|urface |D|efinition |Info|rmation
 SMGAP:Tolerance for |Sm|all |Gap|s along Surface Edges
 TRSD:|Tr|ansform a |S|urface |D|efinition
 DELSD:|Del|ete a |S|urface |D|efinition
 DELSDS:|Del|ete a List of |S|urface |D|efinition|S|
 GETOL:Relative |Ge|ometry |Tol|erance
 FETOL:|Fe|ature |Tol|erance for Polygon Surfaces