📄 channels.h
字号:
/* $OpenBSD: channels.h,v 1.68 2002/06/10 22:28:41 markus Exp $ *//* * Author: Tatu Ylonen <ylo@cs.hut.fi> * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland * All rights reserved * * As far as I am concerned, the code I have written for this software * can be used freely for any purpose. Any derived versions of this * software must be clearly marked as such, and if the derived work is * incompatible with the protocol description in the RFC file, it must be * called by a name other than "ssh" or "Secure Shell". *//* * Copyright (c) 1999, 2000, 2001, 2002 Markus Friedl. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */#ifndef CHANNEL_H#define CHANNEL_H#include "buffer.h"/* Definitions for channel types. */#define SSH_CHANNEL_X11_LISTENER 1 /* Listening for inet X11 conn. */#define SSH_CHANNEL_PORT_LISTENER 2 /* Listening on a port. */#define SSH_CHANNEL_OPENING 3 /* waiting for confirmation */#define SSH_CHANNEL_OPEN 4 /* normal open two-way channel */#define SSH_CHANNEL_CLOSED 5 /* waiting for close confirmation */#define SSH_CHANNEL_AUTH_SOCKET 6 /* authentication socket */#define SSH_CHANNEL_X11_OPEN 7 /* reading first X11 packet */#define SSH_CHANNEL_INPUT_DRAINING 8 /* sending remaining data to conn */#define SSH_CHANNEL_OUTPUT_DRAINING 9 /* sending remaining data to app */#define SSH_CHANNEL_LARVAL 10 /* larval session */#define SSH_CHANNEL_RPORT_LISTENER 11 /* Listening to a R-style port */#define SSH_CHANNEL_CONNECTING 12#define SSH_CHANNEL_DYNAMIC 13#define SSH_CHANNEL_ZOMBIE 14 /* Almost dead. */#define SSH_CHANNEL_MAX_TYPE 15#define SSH_CHANNEL_PATH_LEN 256struct Channel;typedef struct Channel Channel;typedef void channel_callback_fn(int, void *);typedef int channel_filter_fn(struct Channel *, char *, int);struct Channel { int type; /* channel type/state */ int self; /* my own channel identifier */ int remote_id; /* channel identifier for remote peer */ u_int istate; /* input from channel (state of receive half) */ u_int ostate; /* output to channel (state of transmit half) */ int flags; /* close sent/rcvd */ int rfd; /* read fd */ int wfd; /* write fd */ int efd; /* extended fd */ int sock; /* sock fd */ int isatty; /* rfd is a tty */ int force_drain; /* force close on iEOF */ int delayed; /* fdset hack */ Buffer input; /* data read from socket, to be sent over * encrypted connection */ Buffer output; /* data received over encrypted connection for * send on socket */ Buffer extended; char path[SSH_CHANNEL_PATH_LEN]; /* path for unix domain sockets, or host name for forwards */ int listening_port; /* port being listened for forwards */ int host_port; /* remote port to connect for forwards */ char *remote_name; /* remote hostname */ int remote_window; int remote_maxpacket; int local_window; int local_window_max; int local_consumed; int local_maxpacket; int extended_usage; int single_connection; char *ctype; /* type */ /* callback */ channel_callback_fn *confirm; channel_callback_fn *detach_user; /* filter */ channel_filter_fn *input_filter;};#define CHAN_EXTENDED_IGNORE 0#define CHAN_EXTENDED_READ 1#define CHAN_EXTENDED_WRITE 2/* default window/packet sizes for tcp/x11-fwd-channel */#define CHAN_SES_PACKET_DEFAULT (32*1024)#define CHAN_SES_WINDOW_DEFAULT (4*CHAN_SES_PACKET_DEFAULT)#define CHAN_TCP_PACKET_DEFAULT (32*1024)#define CHAN_TCP_WINDOW_DEFAULT (4*CHAN_TCP_PACKET_DEFAULT)#define CHAN_X11_PACKET_DEFAULT (16*1024)#define CHAN_X11_WINDOW_DEFAULT (4*CHAN_X11_PACKET_DEFAULT)/* possible input states */#define CHAN_INPUT_OPEN 0#define CHAN_INPUT_WAIT_DRAIN 1#define CHAN_INPUT_WAIT_OCLOSE 2#define CHAN_INPUT_CLOSED 3/* possible output states */#define CHAN_OUTPUT_OPEN 0#define CHAN_OUTPUT_WAIT_DRAIN 1#define CHAN_OUTPUT_WAIT_IEOF 2#define CHAN_OUTPUT_CLOSED 3#define CHAN_CLOSE_SENT 0x01#define CHAN_CLOSE_RCVD 0x02#define CHAN_EOF_SENT 0x04#define CHAN_EOF_RCVD 0x08/* check whether 'efd' is still in use */#define CHANNEL_EFD_INPUT_ACTIVE(c) \ (compat20 && c->extended_usage == CHAN_EXTENDED_READ && \ (c->efd != -1 || \ buffer_len(&c->extended) > 0))#define CHANNEL_EFD_OUTPUT_ACTIVE(c) \ (compat20 && c->extended_usage == CHAN_EXTENDED_WRITE && \ ((c->efd != -1 && !(c->flags & (CHAN_EOF_RCVD|CHAN_CLOSE_RCVD))) || \ buffer_len(&c->extended) > 0))/* channel management */Channel *channel_lookup(int);Channel *channel_new(char *, int, int, int, int, int, int, int, char *, int);void channel_set_fds(int, int, int, int, int, int, u_int);void channel_free(Channel *);void channel_free_all(void);void channel_stop_listening(void);void channel_send_open(int);void channel_request_start(int, char *, int);void channel_register_cleanup(int, channel_callback_fn *);void channel_register_confirm(int, channel_callback_fn *);void channel_register_filter(int, channel_filter_fn *);void channel_cancel_cleanup(int);int channel_close_fd(int *);/* protocol handler */void channel_input_close(int, u_int32_t, void *);void channel_input_close_confirmation(int, u_int32_t, void *);void channel_input_data(int, u_int32_t, void *);void channel_input_extended_data(int, u_int32_t, void *);void channel_input_ieof(int, u_int32_t, void *);void channel_input_oclose(int, u_int32_t, void *);void channel_input_open_confirmation(int, u_int32_t, void *);void channel_input_open_failure(int, u_int32_t, void *);void channel_input_port_open(int, u_int32_t, void *);void channel_input_window_adjust(int, u_int32_t, void *);/* file descriptor handling (read/write) */void channel_prepare_select(fd_set **, fd_set **, int *, int*, int);void channel_after_select(fd_set *, fd_set *);void channel_output_poll(void);int channel_not_very_much_buffered_data(void);void channel_close_all(void);int channel_still_open(void);char *channel_open_message(void);int channel_find_open(void);/* tcp forwarding */void channel_set_af(int af);void channel_permit_all_opens(void);void channel_add_permitted_opens(char *, int);void channel_clear_permitted_opens(void);void channel_input_port_forward_request(int, int);int channel_connect_to(const char *, u_short);int channel_connect_by_listen_address(u_short);void channel_request_remote_forwarding(u_short, const char *, u_short);int channel_setup_local_fwd_listener(u_short, const char *, u_short, int);int channel_setup_remote_fwd_listener(const char *, u_short, int);/* x11 forwarding */int x11_connect_display(void);int x11_create_display_inet(int, int, int);void x11_input_open(int, u_int32_t, void *);void x11_request_forwarding_with_spoofing(int, const char *, const char *);void deny_input_open(int, u_int32_t, void *);/* agent forwarding */void auth_request_forwarding(void);void auth_input_open_request(int, u_int32_t, void *);/* channel close */int chan_is_dead(Channel *, int);void chan_mark_dead(Channel *);/* channel events */void chan_rcvd_oclose(Channel *);void chan_read_failed(Channel *);void chan_ibuf_empty(Channel *);void chan_rcvd_ieof(Channel *);void chan_write_failed(Channel *);void chan_obuf_empty(Channel *);#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -