cris.md

linux下的gcc编译器

      end_sequence ();

      emit_no_conflict_block (insns, op0, op1, 0, op1);
      DONE;
    }
}")

(define_insn "*movdi_insn"
  [(set (match_operand:DI 0 "nonimmediate_operand" "=r,r,m")
	(match_operand:DI 1 "general_operand" "r,g,rM"))]
  "register_operand (operands[0], DImode)
   || register_operand (operands[1], DImode)
   || operands[1] == const0_rtx"
  "#")

(define_split
  [(set (match_operand:DI 0 "nonimmediate_operand" "")
	(match_operand:DI 1 "general_operand" ""))]
  "reload_completed"
  [(match_dup 2)]
  "operands[2] = cris_split_movdx (operands);")

;; Side-effect patterns for move.S1 [rx=ry+rx.S2],rw
;; and move.S1 [rx=ry+i],rz
;;  Then movs.S1 and movu.S1 for both modes.
;;
;; move.S1 [rx=ry+rz.S],rw avoiding when rx is ry, or rw is rx
;; FIXME: These could have anonymous mode for operand 0.

;; QImode

(define_insn "*mov_sideqi_biap"
  [(set (match_operand:QI 0 "register_operand" "=r,r")
	(mem:QI (plus:SI
		 (mult:SI (match_operand:SI 1 "register_operand" "r,r")
			  (match_operand:SI 2 "const_int_operand" "n,n"))
		 (match_operand:SI 3 "register_operand" "r,r"))))
   (set (match_operand:SI 4 "register_operand" "=*3,r")
	(plus:SI (mult:SI (match_dup 1)
			  (match_dup 2))
		 (match_dup 3)))]
  "cris_side_effect_mode_ok (MULT, operands, 4, 3, 1, 2, 0)"
  "@
   #
   move.%s0 [%4=%3+%1%T2],%0")

;; HImode

(define_insn "*mov_sidehi_biap"
  [(set (match_operand:HI 0 "register_operand" "=r,r")
	(mem:HI (plus:SI
		 (mult:SI (match_operand:SI 1 "register_operand" "r,r")
			  (match_operand:SI 2 "const_int_operand" "n,n"))
		 (match_operand:SI 3 "register_operand" "r,r"))))
   (set (match_operand:SI 4 "register_operand" "=*3,r")
	(plus:SI (mult:SI (match_dup 1)
			  (match_dup 2))
		 (match_dup 3)))]
  "cris_side_effect_mode_ok (MULT, operands, 4, 3, 1, 2, 0)"
  "@
   #
   move.%s0 [%4=%3+%1%T2],%0")

;; SImode

(define_insn "*mov_sidesi_biap"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
	(mem:SI (plus:SI
		 (mult:SI (match_operand:SI 1 "register_operand" "r,r")
			  (match_operand:SI 2 "const_int_operand" "n,n"))
		 (match_operand:SI 3 "register_operand" "r,r"))))
   (set (match_operand:SI 4 "register_operand" "=*3,r")
	(plus:SI (mult:SI (match_dup 1)
			  (match_dup 2))
		 (match_dup 3)))]
  "cris_side_effect_mode_ok (MULT, operands, 4, 3, 1, 2, 0)"
  "@
   #
   move.%s0 [%4=%3+%1%T2],%0")

;; move.S1 [rx=ry+i],rz
;; avoiding move.S1 [ry=ry+i],rz
;; and      move.S1 [rz=ry+i],rz
;; Note that "i" is allowed to be a register.
;; FIXME: These could have anonymous mode for operand 0.

;; QImode

(define_insn "*mov_sideqi"
  [(set (match_operand:QI 0 "register_operand" "=r,r,r")
	(mem:QI
	 (plus:SI (match_operand:SI 1 "cris_bdap_operand" "%r,r,r")
		  (match_operand:SI 2 "cris_bdap_operand" "r>Rn,r,>Rn"))))
   (set (match_operand:SI 3 "register_operand" "=*1,r,r")
	(plus:SI (match_dup 1)
		 (match_dup 2)))]
  "cris_side_effect_mode_ok (PLUS, operands, 3, 1, 2, -1, 0)"
  "*
{
  if (which_alternative == 0
      && (GET_CODE (operands[2]) != CONST_INT
	  || INTVAL (operands[2]) > 127
	  || INTVAL (operands[2]) < -128
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), 'N')
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), 'J')))
    return \"#\";
  return \"move.%s0 [%3=%1%S2],%0\";
}")

;; HImode

(define_insn "*mov_sidehi"
  [(set (match_operand:HI 0 "register_operand" "=r,r,r")
	(mem:HI
	 (plus:SI (match_operand:SI 1 "cris_bdap_operand" "%r,r,r")
		  (match_operand:SI 2 "cris_bdap_operand" "r>Rn,r,>Rn"))))
   (set (match_operand:SI 3 "register_operand" "=*1,r,r")
	(plus:SI (match_dup 1)
		 (match_dup 2)))]
  "cris_side_effect_mode_ok (PLUS, operands, 3, 1, 2, -1, 0)"
  "*
{
  if (which_alternative == 0
      && (GET_CODE (operands[2]) != CONST_INT
	  || INTVAL (operands[2]) > 127
	  || INTVAL (operands[2]) < -128
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), 'N')
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), 'J')))
    return \"#\";
  return \"move.%s0 [%3=%1%S2],%0\";
}")

;; SImode

(define_insn "*mov_sidesi"
  [(set (match_operand:SI 0 "register_operand" "=r,r,r")
	(mem:SI
	 (plus:SI (match_operand:SI 1 "cris_bdap_operand" "%r,r,r")
		  (match_operand:SI 2 "cris_bdap_operand" "r>Rn,r,>Rn"))))
   (set (match_operand:SI 3 "register_operand" "=*1,r,r")
	(plus:SI (match_dup 1)
		 (match_dup 2)))]
  "cris_side_effect_mode_ok (PLUS, operands, 3, 1, 2, -1, 0)"
  "*
{
  if (which_alternative == 0
      && (GET_CODE (operands[2]) != CONST_INT
	  || INTVAL (operands[2]) > 127
	  || INTVAL (operands[2]) < -128
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), 'N')
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), 'J')))
    return \"#\";
  return \"move.%s0 [%3=%1%S2],%0\";
}")

;; Other way around; move to memory.

;; Note that the condition (which for side-effect patterns is usually a
;; call to cris_side_effect_mode_ok), isn't consulted for register
;; allocation preferences -- constraints is the method for that.  The
;; drawback is that we can't exclude register allocation to cause
;; "move.s rw,[rx=ry+rz.S]" when rw==rx without also excluding rx==ry or
;; rx==rz if we use an earlyclobber modifier for the constraint for rx.
;; Instead of that, we recognize and split the cases where dangerous
;; register combinations are spotted: where a register is set in the
;; side-effect, and used in the main insn.  We don't handle the case where
;; the set in the main insn overlaps the set in the side-effect; that case
;; must be handled in gcc.  We handle just the case where the set in the
;; side-effect overlaps the input operand of the main insn (i.e. just
;; moves to memory).

;;
;; move.s rz,[ry=rx+rw.S]
;; FIXME: These could have anonymous mode for operand 3.

;; QImode

(define_insn "*mov_sideqi_biap_mem"
  [(set (mem:QI (plus:SI
		 (mult:SI (match_operand:SI 0 "register_operand" "r,r,r")
			  (match_operand:SI 1 "const_int_operand" "n,n,n"))
		 (match_operand:SI 2 "register_operand" "r,r,r")))
	(match_operand:QI 3 "register_operand" "r,r,r"))
   (set (match_operand:SI 4 "register_operand" "=*2,!3,r")
	(plus:SI (mult:SI (match_dup 0)
			  (match_dup 1))
		 (match_dup 2)))]
  "cris_side_effect_mode_ok (MULT, operands, 4, 2, 0, 1, 3)"
  "@
   #
   #
   move.%s3 %3,[%4=%2+%0%T1]")

;; HImode

(define_insn "*mov_sidehi_biap_mem"
  [(set (mem:HI (plus:SI
		 (mult:SI (match_operand:SI 0 "register_operand" "r,r,r")
			  (match_operand:SI 1 "const_int_operand" "n,n,n"))
		 (match_operand:SI 2 "register_operand" "r,r,r")))
	(match_operand:HI 3 "register_operand" "r,r,r"))
   (set (match_operand:SI 4 "register_operand" "=*2,!3,r")
	(plus:SI (mult:SI (match_dup 0)
			  (match_dup 1))
		 (match_dup 2)))]
  "cris_side_effect_mode_ok (MULT, operands, 4, 2, 0, 1, 3)"
  "@
   #
   #
   move.%s3 %3,[%4=%2+%0%T1]")

;; SImode

(define_insn "*mov_sidesi_biap_mem"
  [(set (mem:SI (plus:SI
		 (mult:SI (match_operand:SI 0 "register_operand" "r,r,r")
			  (match_operand:SI 1 "const_int_operand" "n,n,n"))
		 (match_operand:SI 2 "register_operand" "r,r,r")))
	(match_operand:SI 3 "register_operand" "r,r,r"))
   (set (match_operand:SI 4 "register_operand" "=*2,!3,r")
	(plus:SI (mult:SI (match_dup 0)
			  (match_dup 1))
		 (match_dup 2)))]
  "cris_side_effect_mode_ok (MULT, operands, 4, 2, 0, 1, 3)"
  "@
   #
   #
   move.%s3 %3,[%4=%2+%0%T1]")

;; Split for the case above where we're out of luck with register
;; allocation (again, the condition isn't checked for that), and we end up
;; with the set in the side-effect getting the same register as the input
;; register.

(define_split
  [(parallel
    [(set (match_operator
	   6 "cris_mem_op"
	   [(plus:SI
	     (mult:SI (match_operand:SI 0 "register_operand" "")
		      (match_operand:SI 1 "const_int_operand" ""))
	     (match_operand:SI 2 "register_operand" ""))])
	  (match_operand 3 "register_operand" ""))
     (set (match_operand:SI 4 "register_operand" "")
	  (plus:SI (mult:SI (match_dup 0)
			    (match_dup 1))
		   (match_dup 2)))])]
  "reload_completed && reg_overlap_mentioned_p (operands[4], operands[3])"
  [(set (match_dup 5) (match_dup 3))
   (set (match_dup 4) (match_dup 2))
   (set (match_dup 4)
	(plus:SI (mult:SI (match_dup 0)
			  (match_dup 1))
		 (match_dup 4)))]
  "operands[5]
     = replace_equiv_address (operands[6],
			      gen_rtx_PLUS (SImode,
					    gen_rtx_MULT (SImode,
							  operands[0],
							  operands[1]),
					    operands[2]));")

;; move.s rx,[ry=rz+i]
;; FIXME: These could have anonymous mode for operand 2.

;; QImode

(define_insn "*mov_sideqi_mem"
  [(set (mem:QI
	 (plus:SI (match_operand:SI 0 "cris_bdap_operand" "%r,r,r,r")
		  (match_operand:SI 1 "cris_bdap_operand" "r>Rn,r>Rn,r,>Rn")))
	(match_operand:QI 2 "register_operand" "r,r,r,r"))
   (set (match_operand:SI 3 "register_operand" "=*0,!2,r,r")
	(plus:SI (match_dup 0)
		 (match_dup 1)))]
  "cris_side_effect_mode_ok (PLUS, operands, 3, 0, 1, -1, 2)"
  "*
{
  if (which_alternative == 0
      && (GET_CODE (operands[1]) != CONST_INT
	  || INTVAL (operands[1]) > 127
	  || INTVAL (operands[1]) < -128
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), 'N')
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), 'J')))
    return \"#\";
  if (which_alternative == 1)
    return \"#\";
  return \"move.%s2 %2,[%3=%0%S1]\";
}")

;; HImode

(define_insn "*mov_sidehi_mem"
  [(set (mem:HI
	 (plus:SI (match_operand:SI 0 "cris_bdap_operand" "%r,r,r,r")
		  (match_operand:SI 1 "cris_bdap_operand" "r>Rn,r>Rn,r,>Rn")))
	(match_operand:HI 2 "register_operand" "r,r,r,r"))
   (set (match_operand:SI 3 "register_operand" "=*0,!2,r,r")
	(plus:SI (match_dup 0)
		 (match_dup 1)))]
  "cris_side_effect_mode_ok (PLUS, operands, 3, 0, 1, -1, 2)"
  "*
{
  if (which_alternative == 0
      && (GET_CODE (operands[1]) != CONST_INT
	  || INTVAL (operands[1]) > 127
	  || INTVAL (operands[1]) < -128
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), 'N')
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), 'J')))
    return \"#\";
  if (which_alternative == 1)
    return \"#\";
  return \"move.%s2 %2,[%3=%0%S1]\";
}")

;; SImode

(define_insn "*mov_sidesi_mem"
  [(set (mem:SI
	 (plus:SI (match_operand:SI 0 "cris_bdap_operand" "%r,r,r,r")
		  (match_operand:SI 1 "cris_bdap_operand" "r>Rn,r>Rn,r,>Rn")))
	(match_operand:SI 2 "register_operand" "r,r,r,r"))
   (set (match_operand:SI 3 "register_operand" "=*0,!2,r,r")
	(plus:SI (match_dup 0)
		 (match_dup 1)))]
  "cris_side_effect_mode_ok (PLUS, operands, 3, 0, 1, -1, 2)"
  "*
{
  if (which_alternative == 0
      && (GET_CODE (operands[1]) != CONST_INT
	  || INTVAL (operands[1]) > 127
	  || INTVAL (operands[1]) < -128
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), 'N')
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), 'J')))
    return \"#\";
  if (which_alternative == 1)
    return \"#\";
  return \"move.%s2 %2,[%3=%0%S1]\";
}")

;; Like the biap case, a split where the set in the side-effect gets the
;; same register as the input register to the main insn, since the
;; condition isn't checked at register allocation.

(define_split
  [(parallel
    [(set (match_operator
	   4 "cris_mem_op"
	   [(plus:SI
	     (match_operand:SI 0 "cris_bdap_operand" "")
	     (match_operand:SI 1 "cris_bdap_operand" ""))])
	  (match_operand 2 "register_operand" ""))
     (set (match_operand:SI 3 "register_operand" "")
	  (plus:SI (match_dup 0) (match_dup 1)))])]
  "reload_completed && reg_overlap_mentioned_p (operands[3], operands[2])"
  [(set (match_dup 4) (match_dup 2))
   (set (match_dup 3) (match_dup 0))
   (set (match_dup 3) (plus:SI (match_dup 3) (match_dup 1)))]
  "")

;; Clear memory side-effect patterns.  It is hard to get to the mode if
;; the MEM was anonymous, so there will be one for each mode.

;; clear.d [ry=rx+rw.s2]

(define_insn "*clear_sidesi_biap"
  [(set (mem:SI (plus:SI
		 (mult:SI (match_operand:SI 0 "register_operand" "r,r")
			  (match_operand:SI 1 "const_int_operand" "n,n"))
		 (match_operand:SI 2 "register_operand" "r,r")))
	(const_int 0))
   (set (match_operand:SI 3 "register_operand" "=*2,r")
	(plus:SI (mult:SI (match_dup 0)
			  (match_dup 1))
		 (match_dup 2)))]
  "cris_side_effect_mode_ok (MULT, operands, 3, 2, 0, 1, -1)"
  "@
   #
   clear.d [%3=%2+%0%T1]")

;; clear.d [ry=rz+i]

(define_insn "*clear_sidesi"
  [(set (mem:SI
	 (plus:SI (match_operand:SI 0 "cris_bdap_operand" "%r,r,r")
		  (match_operand:SI 1 "cris_bdap_operand" "r>Rn,r,>Rn")))
	(const_int 0))
   (set (match_operand:SI 2 "register_operand" "=*0,r,r")
	(plus:SI (match_dup 0)
		 (match_dup 1)))]
  "cris_side_effect_mode_ok (PLUS, operands, 2, 0, 1, -1, -1)"
  "*
{
  if (which_alternative == 0
      && (GET_CODE (operands[1]) != CONST_INT
	  || INTVAL (operands[1]) > 127
	  || INTVAL (operands[1]) < -128
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), 'N')
	  || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), 'J')))
    return \"#\";
  return \"clear.d [%2=%0%S1]\";
}")

;;  clear.w [ry=rx+rw.s2]

(define_insn "*clear_sidehi_biap"