rfc2115.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

             frErrType               INTEGER,
             frErrData               OCTET STRING,
             frErrTime               TimeStamp,
             frErrFaults             Counter32,
             frErrFaultTime          TimeStamp
     }


     frErrIfIndex OBJECT-TYPE
         SYNTAX   InterfaceIndex
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The ifIndex Value of the corresponding ifEntry."
         ::= { frErrEntry 1 }


         frErrType OBJECT-TYPE
             SYNTAX   INTEGER    {
                         unknownError(1),
                         receiveShort(2),
                         receiveLong(3),
                         illegalAddress(4),
                         unknownAddress(5),
                         dlcmiProtoErr(6),
                         dlcmiUnknownIE(7),
                         dlcmiSequenceErr(8),
                         dlcmiUnknownRpt(9),
                         noErrorSinceReset(10)
                      }
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
     "The type of error that was last seen  on  this interface:

     receiveShort: frame was not long enough to allow
             demultiplexing - the address field was incomplete,
             or for virtual circuits using Multiprotocol over
             Frame Relay, the protocol identifier was missing
             or incomplete.

     receiveLong: frame exceeded maximum length configured for this
                  interface.

     illegalAddress: address field did not match configured format.

     unknownAddress: frame received on a virtual circuit which was not
                     active or administratively disabled.

     dlcmiProtoErr: unspecified error occurred when attempting to
                    interpret link maintenance frame.

     dlcmiUnknownIE: link maintenance frame contained an Information
                     Element type which is not valid for the
                     configured link maintenance protocol.

     dlcmiSequenceErr: link maintenance frame contained a sequence
                       number other than the expected value.

     dlcmiUnknownRpt: link maintenance frame contained a Report Type
                      Information Element whose value was not valid
                      for the configured link maintenance protocol.

     noErrorSinceReset: no errors have been detected since the last
                        cold start or warm start."
         ::= { frErrEntry 2 }


     frErrData OBJECT-TYPE
         SYNTAX   OCTET STRING (SIZE(1..1600))
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "An octet string containing as much of the error packet
            as possible.  As a minimum, it must contain the Q.922
            Address or as much as was delivered.  It is desirable
            to include all header and demultiplexing information."
         ::= { frErrEntry 3 }

     frErrTime OBJECT-TYPE
         SYNTAX   TimeStamp
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The value of sysUpTime at which the error was
            detected."
         ::= { frErrEntry 4 }


     frErrFaults OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The number of times the interface has gone down since
            it was initialized."
         ::= { frErrEntry 5 }


     frErrFaultTime OBJECT-TYPE
         SYNTAX   TimeStamp
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The value of sysUpTime at the time when the interface
            was taken down due to excessive errors.  Excessive
            errors is defined as the time when a DLCMI exceeds the
            frDlcmiErrorThreshold number of errors within
            frDlcmiMonitoredEvents. See FrDlcmiEntry for further
            details."
         ::= { frErrEntry 6 }


     --

     -- Frame Relay Trap Control

     frameRelayTrapControl OBJECT IDENTIFIER ::= { frameRelayDTE 4 }

     -- the following highly unusual OID is as it is for compatibility
     -- with RFC 1315, the SNMP V1 predecessor of this document.
     frameRelayTraps OBJECT IDENTIFIER ::= { frameRelayDTE 0 }

     frTrapState OBJECT-TYPE
         SYNTAX  INTEGER     { enabled(1), disabled(2) }
         MAX-ACCESS   read-write
         STATUS   current
         DESCRIPTION
            "This variable indicates whether the system produces
            the frDLCIStatusChange trap."
         DEFVAL { disabled }
         ::= { frameRelayTrapControl 1 }

     frTrapMaxRate OBJECT-TYPE
         SYNTAX  Integer32 (0..3600000)
         MAX-ACCESS   read-write
         STATUS   current
         DESCRIPTION
            "This variable indicates the number of milliseconds
            that must elapse between trap emissions.  If events
            occur more rapidly, the impementation may simply fail
            to trap, or may queue traps until an appropriate time."
         DEFVAL { 0 }        -- no minimum elapsed period is specified
         ::= { frameRelayTrapControl 2 }



     --  Data Link Connection Management Interface Related Traps

     frDLCIStatusChange NOTIFICATION-TYPE
         OBJECTS  { frCircuitState }
         STATUS      current


         DESCRIPTION
            "This trap indicates that the indicated Virtual Circuit
            has changed state.  It has either been created or
            invalidated, or has toggled between the active and
            inactive states.  If, however, the reason for the state
            change is due to the DLCMI going down, per-DLCI traps
            should not be generated."
     ::= { frameRelayTraps 1 }
     -- conformance information

     frConformance OBJECT IDENTIFIER ::= { frameRelayDTE 6 }

     frGroups      OBJECT IDENTIFIER ::= { frConformance 1 }
     frCompliances OBJECT IDENTIFIER ::= { frConformance 2 }

     -- compliance statements

     frCompliance MODULE-COMPLIANCE
         STATUS  current
         DESCRIPTION
            "The compliance statement "
         MODULE  -- this module
         MANDATORY-GROUPS { frPortGroup, frCircuitGroup }

         GROUP       frErrGroup
         DESCRIPTION
            "This optional group is used for debugging Frame Relay
            Systems."

         GROUP       frTrapGroup
         DESCRIPTION
            "This optional group is used for the management of
            asynchronous notifications by Frame Relay Systems."

         GROUP       frNotificationGroup
         DESCRIPTION
            "This optional group defines the asynchronous
            notifications generated by Frame Relay Systems."

         OBJECT      frDlcmiRowStatus
         MIN-ACCESS  read-only
         DESCRIPTION
            "Row creation is not required for the frDlcmiTable."

         OBJECT      frCircuitRowStatus

         MIN-ACCESS  read-only
         DESCRIPTION
            "Row creation is not required for the frCircuitTable."

         ::= { frCompliances 1 }

     frCompliance0 MODULE-COMPLIANCE
         STATUS  current
         DESCRIPTION
            "The compliance statement for objects and the trap
            defined in RFC 1315."
         MODULE  -- this module
         MANDATORY-GROUPS { frPortGroup0, frCircuitGroup0 }

         GROUP       frErrGroup0
         DESCRIPTION
            "This optional group is used for debugging Frame Relay
            Systems."
         GROUP       frTrapGroup0
         DESCRIPTION
            "This optional group is used for the management of
            asynchronous notifications by Frame Relay Systems."

         GROUP       frNotificationGroup
         DESCRIPTION
            "This optional group defines the asynchronous
            notifications generated by Frame Relay Systems."

         ::= { frCompliances 2 }

     -- units of conformance

     frPortGroup    OBJECT-GROUP
         OBJECTS {
                   frDlcmiIfIndex, frDlcmiState, frDlcmiAddress,
                   frDlcmiAddressLen, frDlcmiPollingInterval,
                   frDlcmiFullEnquiryInterval, frDlcmiErrorThreshold,
                   frDlcmiMonitoredEvents, frDlcmiMaxSupportedVCs,
                   frDlcmiMulticast, frDlcmiStatus, frDlcmiRowStatus
                }
         STATUS  current
         DESCRIPTION
            "The objects necessary to control the Link Management
            Interface for a Frame Relay Interface as well as
            maintain the error statistics on this interface."
         ::= { frGroups 1 }

     frCircuitGroup    OBJECT-GROUP
         OBJECTS {
                   frCircuitIfIndex, frCircuitDlci, frCircuitState,
                   frCircuitReceivedFECNs, frCircuitReceivedBECNs,
                   frCircuitSentFrames, frCircuitSentOctets,
                   frCircuitReceivedFrames, frCircuitReceivedOctets,
                   frCircuitCreationTime, frCircuitLastTimeChange,
                   frCircuitCommittedBurst, frCircuitExcessBurst,
                   frCircuitThroughput, frCircuitMulticast,
                   frCircuitType, frCircuitDiscards,
                   frCircuitReceivedDEs, frCircuitSentDEs,
                   frCircuitLogicalIfIndex, frCircuitRowStatus
                 }
         STATUS  current
         DESCRIPTION
            "The objects necessary to control the Virtual Circuits
            layered onto a Frame Relay Interface."
         ::= { frGroups 2 }

     frTrapGroup    OBJECT-GROUP
         OBJECTS { frTrapState, frTrapMaxRate }
         STATUS  current
         DESCRIPTION
            "The objects necessary to control a Frame Relay
            Interface's notification messages."
         ::= { frGroups 3 }

     frErrGroup    OBJECT-GROUP
         OBJECTS {
                   frErrIfIndex, frErrType, frErrData, frErrTime,
                   frErrFaults, frErrFaultTime
                }
         STATUS  current
         DESCRIPTION
            "Objects designed to assist in debugging Frame Relay
            Interfaces."
         ::= { frGroups 4 }

     frNotificationGroup NOTIFICATION-GROUP
         NOTIFICATIONS { frDLCIStatusChange }
         STATUS  current
         DESCRIPTION
            "Traps which may be used to enhance event driven
            management of the interface."
         ::= { frGroups 5 }

     frPortGroup0    OBJECT-GROUP
         OBJECTS {
                   frDlcmiIfIndex, frDlcmiState, frDlcmiAddress,
                   frDlcmiAddressLen, frDlcmiPollingInterval,
                   frDlcmiFullEnquiryInterval, frDlcmiErrorThreshold,
                   frDlcmiMonitoredEvents, frDlcmiMaxSupportedVCs,
                   frDlcmiMulticast
                }
         STATUS  current
         DESCRIPTION
            "The objects necessary to control the Link Management
            Interface for a Frame Relay Interface as well as
            maintain the error statistics on this interface from
            RFC 1315."
         ::= { frGroups 6 }

     frCircuitGroup0    OBJECT-GROUP
         OBJECTS {
                   frCircuitIfIndex, frCircuitDlci, frCircuitState,
                   frCircuitReceivedFECNs, frCircuitReceivedBECNs,
                   frCircuitSentFrames, frCircuitSentOctets,
                   frCircuitReceivedFrames, frCircuitReceivedOctets,
                   frCircuitCreationTime, frCircuitLastTimeChange,
                   frCircuitCommittedBurst, frCircuitExcessBurst,
                   frCircuitThroughput
                 }
         STATUS  current
         DESCRIPTION
            "The objects necessary to control the Virtual Circuits
            layered onto a Frame Relay Interface from RFC 1315."
         ::= { frGroups 7 }

     frErrGroup0    OBJECT-GROUP
         OBJECTS {
                   frErrIfIndex, frErrType, frErrData, frErrTime
                }
         STATUS  current
         DESCRIPTION
            "Objects designed to assist in debugging Frame Relay
            Interfaces from RFC 1315."
         ::= { frGroups 8 }


     frTrapGroup0    OBJECT-GROUP
         OBJECTS { frTrapState }
         STATUS  current
         DESCRIPTION
            "The objects necessary to control a Frame Relay
            Interface's notification messages from RFC 1315."
         ::= { frGroups 9 }

     END