rfc2115.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

     frCircuitIfIndex OBJECT-TYPE
         SYNTAX   InterfaceIndex
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The ifIndex Value of the ifEntry this virtual circuit
            is layered onto."
         ::= { frCircuitEntry 1 }

     frCircuitDlci OBJECT-TYPE
         SYNTAX   DLCI
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The Data Link Connection Identifier for this virtual
            circuit."
         REFERENCE
            "American National Standard T1.618-1991, Section 3.3.6"
         ::= { frCircuitEntry 2 }


     frCircuitState OBJECT-TYPE
         SYNTAX   INTEGER    {

                     invalid (1),
                     active (2),
                     inactive (3)
                  }
         MAX-ACCESS   read-create
         STATUS   current
         DESCRIPTION
            "Indicates whether the particular virtual circuit is
            operational.  In the absence of a Data Link Connection
            Management Interface, virtual circuit entries (rows)
            may be created by setting virtual circuit state to
            'active', or deleted by changing Circuit state to
            'invalid'.

            Whether or not the row actually disappears is left to
            the implementation, so this object may actually read as
            'invalid' for some arbitrary length of time.  It is
            also legal to set the state of a virtual circuit to
            'inactive' to temporarily disable a given circuit.

            The use of 'invalid' is deprecated in this SNMP Version
            2 MIB, in favor of frCircuitRowStatus."
         DEFVAL { active }
         ::= { frCircuitEntry 3 }

     frCircuitReceivedFECNs OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "Number of frames received from the network indicating
            forward congestion since the virtual circuit was
            created.  This occurs when the remote DTE sets the FECN
            flag, or when a switch in the network enqueues the
            frame to a trunk whose transmission queue is
            congested."
         REFERENCE
            "American National Standard T1.618-1991, Section 3.3.3"
         ::= { frCircuitEntry 4 }


     frCircuitReceivedBECNs OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only


         STATUS   current
         DESCRIPTION
            "Number of frames received from the network indicating
            backward congestion since the virtual circuit was
            created.  This occurs when the remote DTE sets the BECN
            flag, or when a switch in the network receives the
            frame from a trunk whose transmission queue is
            congested."
         REFERENCE
            "American National Standard T1.618-1991, Section 3.3.4"
         ::= { frCircuitEntry 5 }


     frCircuitSentFrames OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The number of frames sent from this virtual circuit
            since it was created."
         ::= { frCircuitEntry 6 }


     frCircuitSentOctets OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The number of octets sent from this virtual circuit
            since it was created.  Octets counted are the full
            frame relay header and the payload, but do not include
            the flag characters or CRC."
         ::= { frCircuitEntry 7 }


     frCircuitReceivedFrames OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "Number of frames received over this virtual circuit
            since it was created."
         ::= { frCircuitEntry 8 }


     frCircuitReceivedOctets OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "Number of octets received over this virtual circuit
            since it was created.  Octets counted include the full
            frame relay header, but do not include the flag
            characters or the CRC."
         ::= { frCircuitEntry 9 }


     frCircuitCreationTime OBJECT-TYPE
         SYNTAX   TimeStamp
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The value of sysUpTime when the virtual circuit was
            created, whether by the Data Link Connection Management
            Interface or by a SetRequest."
         ::= { frCircuitEntry 10 }

     frCircuitLastTimeChange OBJECT-TYPE
         SYNTAX   TimeStamp
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The value of sysUpTime when last there was a change in
            the virtual circuit state"
         ::= { frCircuitEntry 11 }


     frCircuitCommittedBurst OBJECT-TYPE
         SYNTAX   Integer32(0..2147483647)
         MAX-ACCESS   read-create
         STATUS   current
         DESCRIPTION
            "This variable indicates the maximum amount of data, in
            bits, that the network agrees to transfer under normal
            conditions, during the measurement interval."
         REFERENCE
            "American National Standard T1.617-1991, Section
            6.5.19"
         DEFVAL   { 0 }  -- the default indicates no commitment
         ::= { frCircuitEntry 12 }


     frCircuitExcessBurst OBJECT-TYPE
         SYNTAX   Integer32(0..2147483647)
         MAX-ACCESS   read-create
         STATUS   current
         DESCRIPTION
            "This variable indicates the maximum amount of
            uncommitted data bits that the network will attempt to
            deliver over the measurement interval.

            By default, if not configured when creating the entry,
            the Excess Information Burst Size is set to the value
            of ifSpeed."
         REFERENCE
            "American National Standard T1.617-1991, Section
            6.5.19"
         ::= { frCircuitEntry 13 }


     frCircuitThroughput OBJECT-TYPE
         SYNTAX   Integer32(0..2147483647)
         MAX-ACCESS   read-create
         STATUS   current
         DESCRIPTION
            "Throughput is the average number of 'Frame Relay
            Information Field' bits transferred per second across a
            user network interface in one direction, measured over
            the measurement interval.

            If the configured committed burst rate and throughput
            are both non-zero, the measurement interval, T, is
                T=frCircuitCommittedBurst/frCircuitThroughput.

            If the configured committed burst rate and throughput
            are both zero, the measurement interval, T, is
                       T=frCircuitExcessBurst/ifSpeed."
         REFERENCE
            "American National Standard T1.617-1991, Section
            6.5.19"
         DEFVAL {0}  -- the default value of Throughput is
                     -- "no commitment".
         ::= { frCircuitEntry 14 }


     frCircuitMulticast OBJECT-TYPE
         SYNTAX   INTEGER    {
                     unicast   (1),
                     oneWay    (2),
                     twoWay    (3),
                     nWay      (4)
                     }
         MAX-ACCESS   read-create
         STATUS   current
         DESCRIPTION
            "This indicates whether this VC is used as a unicast VC
            (i.e. not multicast) or the type of multicast service
            subscribed to"
         REFERENCE
            "Frame Relay PVC Multicast Service and Protocol
            Description Implementation: FRF.7 Frame Relay Forum
            Technical Committe October 21, 1994"
              DEFVAL {unicast}
                          -- the default value of frCircuitMulticast is
                          -- "unicast" (not a multicast VC).
              ::= { frCircuitEntry 15 }


     frCircuitType OBJECT-TYPE
         SYNTAX   INTEGER    {
                     static  (1),
                     dynamic (2)
                  }
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "Indication of whether the VC was manually created
            (static), or dynamically created (dynamic) via the data
            link control management interface."
         ::= { frCircuitEntry 16 }


     frCircuitDiscards OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "The number of inbound frames dropped because of format
            errors, or because the VC is inactive."
         ::= { frCircuitEntry 17 }


     frCircuitReceivedDEs OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "Number of frames received from the network indicating
            that they were eligible for discard since the virtual
            circuit was created.  This occurs when the remote DTE
            sets the DE flag, or when in remote DTE's switch
            detects that the frame was received as Excess Burst
            data."
         REFERENCE
            "American National Standard T1.618-1991, Section 3.3.4"
         ::= { frCircuitEntry 18 }


     frCircuitSentDEs OBJECT-TYPE
         SYNTAX   Counter32
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
            "Number of frames sent to the network indicating that
            they were eligible for discard since the virtual
            circuit was created.   This occurs when the local DTE
            sets the DE flag, indicating that during Network
            congestion situations those frames should be discarded
            in preference of other frames sent without the DE bit
            set."
         REFERENCE
            "American National  Standard  T1.618-1991, Section
            3.3.4"
        ::= { frCircuitEntry 19 }

     frCircuitLogicalIfIndex OBJECT-TYPE
         SYNTAX  InterfaceIndex
         MAX-ACCESS read-create
         STATUS  current
         DESCRIPTION
            "Normally the same value as frDlcmiIfIndex, but
            different when an implementation associates a virtual
            ifEntry with a DLC or set of DLCs in order to associate
            higher layer objects such as the ipAddrEntry with a
            subset of the virtual circuits on a Frame Relay
            interface. The type of such ifEntries is defined by the
            higher layer object; for example, if PPP/Frame Relay is
            implemented, the ifType of this ifEntry would be PPP.
            If it is not so defined, as would be the case with an
            ipAddrEntry, it should be of type Other."
        ::= { frCircuitEntry 20 }

     frCircuitRowStatus OBJECT-TYPE
         SYNTAX   RowStatus
         MAX-ACCESS   read-create
         STATUS   current
         DESCRIPTION
            "This object is used to create a new row or modify or
            destroy an existing row in the manner described in the
            definition of the RowStatus textual convention.
            Writable objects in the table may be written in any
            RowStatus state."
         ::= { frCircuitEntry 21 }


     --
     --  Error Table

     -- The table describing errors encountered on each Frame
     -- Relay Interface.

     frErrTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF FrErrEntry
         MAX-ACCESS   not-accessible
         STATUS   current
         DESCRIPTION
            "A table containing information about Errors on the
            Frame Relay interface.  Discontinuities in the counters
            contained in this table are the same as apply to the
            ifEntry associated with the Interface."
         ::= { frameRelayDTE 3 }

     frErrEntry OBJECT-TYPE
         SYNTAX   FrErrEntry
         MAX-ACCESS   not-accessible
         STATUS   current
         DESCRIPTION
            "The error information for a single frame relay
            interface."
         INDEX { frErrIfIndex }
         ::= { frErrTable 1 }


     FrErrEntry ::=
         SEQUENCE {
             frErrIfIndex            InterfaceIndex,