rfc2266.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

              }

          vgRptrGroupIndex OBJECT-TYPE
              SYNTAX     Integer32 (1..2146483647)
              MAX-ACCESS not-accessible
              STATUS     current
              DESCRIPTION
                      "This object identifies the group within the
                      system for which this entry contains information.
                      The numbering scheme for groups is implementation
                      specific."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.4.4.1,
                      aGroupID."
              ::= { vgRptrBasicGroupEntry 1 }

          vgRptrGroupObjectID OBJECT-TYPE
              SYNTAX     OBJECT IDENTIFIER
              MAX-ACCESS read-only
              STATUS     current
              DESCRIPTION
                      "The vendor's authoritative identification of the
                      group.  This value may be allocated within the
                      SMI enterprises subtree (1.3.6.1.4.1) and
                      provides a straight-forward and unambiguous means
                      for determining what kind of group is being
                      managed.

                      For example, this object could take the value
                      1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones,
                      Inc.' was assigned the subtree 1.3.6.1.4.1.4242,
                      and had assigned the identifier
                      1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone
                      6-Port Plug-in Module.'"
              ::= { vgRptrBasicGroupEntry 2 }

          vgRptrGroupOperStatus OBJECT-TYPE
              SYNTAX     INTEGER {
                             other(1),
                             operational(2),
                             malfunctioning(3),
                             notPresent(4),
                             underTest(5),
                             resetInProgress(6)
                         }
              MAX-ACCESS read-only
              STATUS     current
              DESCRIPTION
                      "An object that indicates the operational status
                      of the group.

                      A status of notPresent(4) indicates that the
                      group is temporarily or permanently physically
                      and/or logically not a part of the system.  It
                      is an implementation-specific matter as to
                      whether the agent effectively removes notPresent
                      entries from the table.

                      A status of operational(2) indicates that the
                      group is functioning, and a status of
                      malfunctioning(3) indicates that the group is
                      malfunctioning in some way."
              ::= { vgRptrBasicGroupEntry 3 }

          vgRptrGroupPortCapacity OBJECT-TYPE
              SYNTAX     Integer32 (1..2146483647)
              MAX-ACCESS read-only
              STATUS     current
              DESCRIPTION
                      "The vgRptrGroupPortCapacity is the number of
                      ports that can be contained within the group.
                      Valid range is 1-2147483647.  Within each group,
                      the ports are uniquely numbered in the range from
                      1 to vgRptrGroupPortCapacity.

                      Some ports may not be present in the system, in
                      which case the actual number of ports present will
                      be less than the value of vgRptrGroupPortCapacity.
                      The number of ports present is never greater than
                      the value of vgRptrGroupPortCapacity.

                      Note:  In practice, this will generally be the
                      number of ports on a module, card, or board, and
                      the port numbers will correspond to numbers marked
                      on the physical embodiment."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.4.4.1,
                      aGroupPortCapacity."
              ::= { vgRptrBasicGroupEntry 4 }

          vgRptrGroupCablesBundled OBJECT-TYPE
              SYNTAX     INTEGER {
                             someCablesBundled(1),
                             noCablesBundled(2)
                         }
              MAX-ACCESS read-write
              STATUS     current
              DESCRIPTION
                      "This object is used to indicate whether there are
                      any four-pair UTP links connected to this group
                      that are contained in a cable bundle with multiple
                      four-pair groups (e.g. a 25-pair bundle).  Bundled
                      cable may only be used for repeater-to-end node
                      links where the end node is not in promiscuous
                      mode.

                      When a broadcast or multicast packet is received
                      from a port on this group that is not a
                      promiscuous or cascaded port, the packet will be
                      buffered completely before being repeated if
                      this object is set to 'someCablesBundled(1)'.
                      When this object is equal to 'noCablesBundled(2)',
                      all packets received from ports on this group will
                      be repeated as the frame is being received.

                      Note that the value 'someCablesBundled(1)' will
                      work in the vast majority of all installations,
                      regardless of whether or not any cables are
                      physically in a bundle, since packets received
                      from promiscuous and cascaded ports automatically
                      avoid the store and forward.  The main situation
                      in which 'noCablesBundled(2)' is beneficial is
                      when there is a large amount of multicast traffic
                      and the cables are not in a bundle.

                      The value of this object should be preserved
                      across repeater resets and power failures."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.4.4.1,
                      aGroupCablesBundled."
              ::= { vgRptrBasicGroupEntry 5 }

          vgRptrBasicPort   OBJECT IDENTIFIER ::= { vgRptrBasic 3 }

          vgRptrBasicPortTable OBJECT-TYPE
              SYNTAX     SEQUENCE OF VgRptrBasicPortEntry
              MAX-ACCESS not-accessible
              STATUS     current
              DESCRIPTION
                      "A table containing configuration and status
                      information about 802.12 repeater ports in the
                      system.  The number of entries is independent of
                      the number of repeaters in the managed system."
              ::= { vgRptrBasicPort 1 }

          vgRptrBasicPortEntry OBJECT-TYPE
              SYNTAX     VgRptrBasicPortEntry
              MAX-ACCESS not-accessible
              STATUS     current
              DESCRIPTION
                      "An entry in the vgRptrBasicPortTable, containing
                      information about a single port."
              INDEX      { vgRptrGroupIndex, vgRptrPortIndex }
              ::= { vgRptrBasicPortTable 1 }

          VgRptrBasicPortEntry ::=
              SEQUENCE {
                  vgRptrPortIndex                 Integer32,
                  vgRptrPortType                  INTEGER,
                  vgRptrPortAdminStatus           INTEGER,
                  vgRptrPortOperStatus            INTEGER,
                  vgRptrPortSupportedPromiscMode  INTEGER,
                  vgRptrPortSupportedCascadeMode  INTEGER,
                  vgRptrPortAllowedTrainType      INTEGER,
                  vgRptrPortLastTrainConfig       OCTET STRING,
                  vgRptrPortTrainingResult        OCTET STRING,
                  vgRptrPortPriorityEnable        TruthValue,
                  vgRptrPortRptrInfoIndex         Integer32
              }

          vgRptrPortIndex OBJECT-TYPE
              SYNTAX     Integer32 (1..2147483647)
              MAX-ACCESS not-accessible
              STATUS     current
              DESCRIPTION
                      "This object identifies the port within the group
                      for which this entry contains information.  This
                      identifies the port independently from the
                      repeater it may be attached to.  The numbering
                      scheme for ports is implementation specific;
                      however, this value can never be greater than
                      vgRptrGroupPortCapacity for the associated group."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.4.5.1,
                      aPortID."
              ::= { vgRptrBasicPortEntry 1 }

          vgRptrPortType OBJECT-TYPE
              SYNTAX     INTEGER {
                             cascadeExternal(1),
                             cascadeInternal(2),
                             localExternal(3),
                             localInternal(4)
                         }
              MAX-ACCESS read-only
              STATUS     current
              DESCRIPTION
                      "Describes the type of port.  One of the
                      following:

                          cascadeExternal - Port is an uplink with
                                            physical connections which
                                            are externally visible
                          cascadeInternal - Port is an uplink with
                                            physical connections which
                                            are not externally visible,
                                            such as a connection to an
                                            internal backplane in a
                                            chassis
                          localExternal   - Port is a downlink or local
                                            port with externally
                                            visible connections
                          localInternal   - Port is a downlink or local
                                            port with connections which
                                            are not externally visible,
                                            such as a connection to an
                                            internal agent

                      'internal' is used to identify ports which place
                      traffic into the repeater, but do not have any
                      external connections.  Note that both DTE and
                      cascaded repeater downlinks are considered
                      'local' ports."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.4.5.1,
                      aPortType."
              ::= { vgRptrBasicPortEntry 2 }

          vgRptrPortAdminStatus OBJECT-TYPE
              SYNTAX     INTEGER {
                             enabled(1),
                             disabled(2)
                         }
              MAX-ACCESS read-write
              STATUS     current
              DESCRIPTION
                      "Port enable/disable function.  Enabling a
                      disabled port will cause training to be
                      initiated by the training initiator (the slave
                      mode device) on the link.  Setting this object to
                      disabled(2) disables the port.

                      A disabled port neither transmits nor receives.
                      Once disabled, a port must be explicitly enabled
                      to restore operation.  A port which is disabled
                      when power is lost or when a reset is exerted
                      shall remain disabled when normal operation
                      resumes.

                      The value of this object should be preserved
                      across repeater resets and power failures."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.4.5.1,
                      aPortAdministrativeState."
              ::= { vgRptrBasicPortEntry 3 }

          vgRptrPortOperStatus OBJECT-TYPE
              SYNTAX     INTEGER {
                             active(1),
                             inactive(2),
                             training(3)
                         }
              MAX-ACCESS read-only
              STATUS     current
              DESCRIPTION
                      "Current status for the port as specified by the
                      PORT_META_STATE in the port process module of
                      clause 12 [IEEE Std 802.12].

                      During initialization or any link warning
                      conditions, vgRptrPortStatus will be
                      'inactive(2)'.