rfc1666.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

SNA-NAU-MIB DEFINITIONS ::= BEGIN

-- This MIB module contains objects necessary
-- for management of the following SNA devices: PU types 1.0, 2.0, 2.1
-- and LU types 0, 1, 2, 3, 4, 7.  It also contains generic objects
-- which can be used to manage LU 6.2.

-- Naming conventions in this document:
-- The following names are used in object descriptors according to
-- SNA conventions.
-- The name 'PU' or 'Node' is used to describe Node type 1.0, 2.0 or
-- 2.1.
-- The name 'LU' is used to describe Logical Unit of type 0,1,2,3,
-- 4,7 or 6.2.



IMPORTS
        DisplayString, RowStatus, TimeStamp, InstancePointer
                FROM SNMPv2-TC

        Counter32, Gauge32, Integer32,
        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
                FROM SNMPv2-SMI

        MODULE-COMPLIANCE, OBJECT-GROUP
                FROM SNMPv2-CONF

        mib-2
                FROM RFC1213-MIB;


snanauMIB MODULE-IDENTITY
        LAST-UPDATED  "9405120900Z"
        ORGANIZATION  "IETF SNA NAU MIB Working Group"
        CONTACT-INFO
                "       Zbigniew Kielczewski
                        Eicon Technology Inc.
                        2196 32nd Avenue
                        Lachine, Que  H8T 3H7
                        Canada
                        Tel:    [phone]
                        E-mail: [e-mail]

                        Deirdre Kostick
                        Bellcore
                        331 Newman Springs Road
                        Red Bank, NJ 07701
                        Tel:    [phone]
                        E-mail: [e-mail]

                        Kitty Shih (editor)
                        Novell
                        890 Ross Drive
                        Sunnyvale, CA 94089
                        Tel:   [phone]
                        E-mail: [e-mail]"
        DESCRIPTION
                "This is the MIB module for objects used to
                 manage SNA devices."
::= { mib-2 34 }

-- The SNANAU MIB module contains an objects part and a conformance part.
-- Objects are organized into the following groups:
-- (1)snaNode group,
-- (2)snaLU group,
-- (3)snaMgtTools group.

snanauObjects   OBJECT IDENTIFIER ::= { snanauMIB 1 }

  snaNode       OBJECT IDENTIFIER ::= { snanauObjects 1 }
  snaLu         OBJECT IDENTIFIER ::= { snanauObjects 2 }
  snaMgtTools   OBJECT IDENTIFIER ::= { snanauObjects 3}


-- ***************************************************************
-- snaNode group
--
-- It contains Managed Objects related to any type of Node and
-- some specific objects for Node Type 2.0.
-- ***************************************************************


-- ***************************************************************
-- The following table contains generic Node configuration
-- parameters.
-- ***************************************************************

snaNodeAdminTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF SnaNodeAdminEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "This table contains objects which describe the
                configuration parameters for an SNA Node.  Link
                specific configuration objects are contained in
                a separate MIB module (e.g., SNA DLC MIB)
                corresponding to the link type.
                The table snaNodeAdminLinkTable contains objects
                which identify the relationship between node instances
                and link instances.

                The entries (i.e., rows) in this table can be created
                by either an Agent or a Management Station.
                The Management Station can do this through setting
                the appropriate value in the snaNodeAdminRowStatus.

                The snaNodeAdminRowStatus object describes the
                status of an entry and is used to change the status
                of an entry.  The entry is deleted by an Agent based
                on the value of the snaNodeAdminRowStatus.

                The snaNodeAdminState object describes the desired
                operational state of a Node and is used to change the
                operational state of a Node.  For example, such
                information may be obtained from a configuration file.

                How an Agent or a Management Station obtains the
                initial value of each object at creation time is an
                implementation specific issue.

                For each entry in this table, there is a corresponding
                entry in the snaNodeOperTable.
                While the objects in this table describe the desired
                or configured operational values of the SNA Node, the
                actual runtime values are contained in
                snaNodeOperTable."
        ::= { snaNode 1 }

snaNodeAdminEntry OBJECT-TYPE
        SYNTAX  SnaNodeAdminEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "An entry contains the configuration parameters for
                one SNA Node instance. The objects in the entry
                have read-create access.
                An entry can be created, modified or deleted.  The
                object snaNodeAdminRowStatus is used (i.e., set) to
                create or delete a row entry."
        INDEX  { snaNodeAdminIndex }
        ::= { snaNodeAdminTable 1 }

SnaNodeAdminEntry ::= SEQUENCE {
        snaNodeAdminIndex
                Integer32,
        snaNodeAdminName
                DisplayString,
        snaNodeAdminType
                INTEGER,
        snaNodeAdminXidFormat
                INTEGER,
        snaNodeAdminBlockNum
                DisplayString,
        snaNodeAdminIdNum
                DisplayString,
        snaNodeAdminEnablingMethod
                INTEGER,
        snaNodeAdminLuTermDefault
                INTEGER,
        snaNodeAdminMaxLu
                Integer32,
        snaNodeAdminHostDescription
                DisplayString,
        snaNodeAdminStopMethod
                INTEGER,
        snaNodeAdminState
                INTEGER,
        snaNodeAdminRowStatus
                RowStatus
        }

snaNodeAdminIndex OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "Index used to uniquely identify each Node instance.
                If an Agent creates the entry, then it will assign
                this number otherwise a Management Station
                generates a random number when it reserves the
                entry for creation."
        ::= { snaNodeAdminEntry 1 }

snaNodeAdminName OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(0..17))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                "The value indicates the desired name of the
                Node for use during Node activation.
                In Type 2.1 networks, this is a fully-qualified name,
                meaning that the Node name is preceded by the NetId (if
                present) with a period as the delimiter.

                A write operation to this object will
                not change the operational value reflected
                in snaNodeOperName until the Node has
                been re-activated (e.g., after the next initialization
                of the SNA services)."
        ::= { snaNodeAdminEntry 2 }

snaNodeAdminType OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                pu10(2),
                pu20(3),
                t21len(4),
                endNode(5),
                networkNode(6)
                }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                "The value indicates the type of SNA Node.

                A write operation to this object will
                not change the operational value reflected
                in snaNodeOperType until the Node has
                been re-activated (e.g., after the next initialization
                of the SNA services)."
        ::= { snaNodeAdminEntry 3 }

snaNodeAdminXidFormat OBJECT-TYPE
        SYNTAX  INTEGER  {
                format0(1),
                format1(2),
                format3(3)
                }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                "The value indicates the type of XID format used for
                this Node.  Note that there is no format type 2.

                A write operation to this object will
                not change the operational value reflected
                in snaNodeOperAdminXidFormat until the Node has
                been re-activated (e.g., after the next initialization
                of the SNA services)."
        ::= { snaNodeAdminEntry 4 }

snaNodeAdminBlockNum OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(3))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                "The value indicates the block number for this Node
                instance.  It is the first 3 hexadecimal digits of the
                SNA Node id.

                A write operation to this object will
                not change the operational value reflected
                in snaNodeOperBlockNum until the Node has
                been re-activated (e.g., after the next initialization
                of the SNA services)."
        ::= { snaNodeAdminEntry 5 }

snaNodeAdminIdNum OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(5))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                "The value indicates the ID number for this Node
                instance.  This is the last 5 hexadecimal digits of
                the SNA Node id.

                A write operation to this object will
                not change the operational value reflected
                in snaNodeOperIdNum until the Node has
                been re-activated (e.g., after the next initialization
                of the SNA services)."
        ::= { snaNodeAdminEntry 6 }

snaNodeAdminEnablingMethod OBJECT-TYPE
        SYNTAX  INTEGER {
                other (1),
                startup (2),
                demand (3),
                onlyMS (4)
                }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                "The value indicates how the Node should be
                activated for the first time.
                The values have the following meanings:

                other (1)  - may be used for proprietary methods
                   not listed in this enumeration,
                startup (2) - at SNA services' initialization time
                   (this is the default),
                demand (3) - only when LU is requested by application,
                             or
                onlyMS (4) - by a Management Station only.

                A  write operation to this object may immediately
                change the operational value reflected
                in snaNodeOperEnablingMethod depending
                on the Agent implementation.  If the Agent
                implementation accepts immediate changes, then the
                behavior of the Node changes immediately and not only
                after the next system startup of the SNA services.
                An immediate change may only apply when the
                current value 'demand (3)' is changed to 'onlyMS (4)'
                and vice versa."
          ::= { snaNodeAdminEntry 7 }

snaNodeAdminLuTermDefault OBJECT-TYPE
        SYNTAX  INTEGER {
                unbind (1),
                termself (2),
                rshutd (3),
                poweroff(4)
                }
          MAX-ACCESS  read-create
          STATUS  current
          DESCRIPTION
                "The value indicates the desired default method
                used to deactivate LUs for this Node
                For LU6.2s, 'unbind(1)' is the only valid value.

                unbind(1) -   terminate the LU-LU session by sending
                        an SNA UNBIND request.
                termself(2) - terminate the LU-LU session by sending
                        an SNA TERM-SELF (Terminate Self) request on
                        the SSCP-LU session. The SSCP will inform the
                        remote session LU partner to send an UNBIND
                        request to terminate the session.
                rshutd(3) -   terminate the LU-LU session by sending
                        an SNA RSHUTD (Request ShutDown) request to
                        the remote session LU partner. The remote LU
                        will then send an UNBIND request to terminate