rfc2457.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

  EBN-MIB DEFINITIONS ::= BEGIN

   IMPORTS
           MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
                       FROM SNMPv2-SMI
           MODULE-COMPLIANCE, OBJECT-GROUP
                       FROM SNMPv2-CONF
           DisplayString, TEXTUAL-CONVENTION
                       FROM SNMPv2-TC
           SnaControlPointName
                   -- Because the characters allowed in an SNA control
                   -- point name come from a restricted character set,
                   -- these names are not subject to internationalization.
                   FROM APPN-MIB
           snanauMIB
                   FROM SNA-NAU-MIB;

   ebnMIB   MODULE-IDENTITY
          LAST-UPDATED "9804281800Z" -- April 28, 1998
          ORGANIZATION  "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
          CONTACT-INFO
                  "
                          Bob Clouston
                          Cisco Systems
                          7025 Kit Creek Road
                          P.O. Box 14987
                          Research Triangle Park, NC 27709, USA
                          Tel:    [phone]
                          E-mail: [e-mail]

                          Bob Moore
                          IBM Corporation
                          BRQA/501
                          P.O. Box 12195
                          Research Triangle Park, NC 27709, USA
                          Tel:    [phone]
                          E-mail: [e-mail]
                  "

          DESCRIPTION
              " The MIB Module for Extended Border Node"

          ::= { snanauMIB 7 }

   -- snanauMIB ::= { mib-2 34 }

   -- ******************************************************************
   -- Textual Conventions
   -- ------------------------------------------------------------------
   SnaNAUWildcardName   ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
            "Fully-qualified network NAU name. Entries take one of three
            forms:
               - Explicit entries do not contain the character '*'.
               - Partial Wildcard entries have the form 'ccc*', where
                 'ccc' represents one to sixteen characters in a legal
                 SNA NAU Name.
               - A full wildcard  consists of a single character '*'.

            Because the characters allowed in an SNA NAU name come from
            a restricted character set, these names are not subject to
            internationalization."

   SYNTAX DisplayString(SIZE(1..17))

   -- ******************************************************************
   ebnObjects              OBJECT IDENTIFIER ::= { ebnMIB 1 }
   -- ******************************************************************

   -- ******************************************************************
   -- EBN Directory Group
   -- The ebnDirTable is an extension to the appnDirTable.  It specifies
   -- the subnet affiliation for LUs in the EBN's directory.
   -- ******************************************************************

   ebnDir                  OBJECT IDENTIFIER ::= { ebnObjects 1 }

   ebnDirTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EbnDirEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The EBN Directory Table.  This table is an extension
            to the APPN MIB's appnDirTable.  Entries in this table
            are in one-to-one correspondence with entries in the
            appnDirTable, with corresponding entries having identical
            values for their respective indexes."

        ::= { ebnDir 1 }

   ebnDirEntry OBJECT-TYPE
        SYNTAX EbnDirEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in the EBN Directory Table."

        INDEX { ebnDirLuName }

        ::= { ebnDirTable 1 }

   EbnDirEntry ::= SEQUENCE {
           ebnDirLuName             SnaNAUWildcardName,
           ebnDirSubnetAffiliation  INTEGER     }

   ebnDirLuName OBJECT-TYPE
        SYNTAX SnaNAUWildcardName
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Fully qualified network LU name in the domain of a serving
            network node.  If this object has the same value as the
            appnDirLuName object in the APPN MIB, then the two objects
            are referring to the same LU."

        ::= { ebnDirEntry 1 }

   ebnDirSubnetAffiliation OBJECT-TYPE
        SYNTAX INTEGER { native (1),
                         nonNative (2),
                         subarea (3) }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Specifies the subnetwork affiliation of the LU:
                - native(1)    : The LU is in the native APPN subnetwork.
                - nonNative(2) : The LU is in a non-native APPN subnetwork.
                - subarea(3)   : The LU is in a subarea network."

        ::= { ebnDirEntry 2 }

   -- ******************************************************************
   -- EBN Intermediate Session RSCV Group
   -- This table is a sparse extension to the appnIsInTable.  For
   -- sessions crossing ISTGs adjacent to the EBN, it contains the RSCV
   -- and COS used in the direction of the BIND destination.
   -- ******************************************************************

   ebnIsRscv               OBJECT IDENTIFIER ::= { ebnObjects 2 }

   ebnIsRscvTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EbnIsRscvEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The EBN Intermediate Session RSCV table.  This table is an
            extension to the appnIsInTable.  It contains the RSCV and COS
            used in the direction of the BIND destination.  There is an
            entry in this table for each session that traverses an ISTG
            when it enters or leaves this EBN, with corresponding entries
            having identical values for their respective indexes."

        ::= { ebnIsRscv 1}

   ebnIsRscvEntry OBJECT-TYPE
        SYNTAX EbnIsRscvEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Entry in ebnIsRscvTable."
        INDEX { ebnIsRscvCpName,
                ebnIsRscvPcid }

        ::= { ebnIsRscvTable 1 }

   EbnIsRscvEntry ::= SEQUENCE {
           ebnIsRscvCpName            SnaControlPointName,
           ebnIsRscvPcid              OCTET STRING,
           ebnIsRscvDestinationRoute  OCTET STRING,
           ebnIsRscvDestinationCos    DisplayString }

   ebnIsRscvCpName OBJECT-TYPE
        SYNTAX SnaControlPointName
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The network-qualified control point name of the node at
            which the session and PCID originated.  For APPN and LEN
            nodes, this is either CP name of the APPN node at which
            the origin LU is located or the CP name of the NN serving
            the LEN node at which the origin LU is located.  For DLUR
            resources it is the name of the owning SSCP.

            If this object has the same value as the appnIsInFqCpName
            object in the APPN MIB, then the two objects are referring to
            the same APPN control point."

        ::= { ebnIsRscvEntry 1 }

   ebnIsRscvPcid OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE (8))
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The procedure correlation identifier (PCID) of a session.
            It is an 8-octet value.

            If this object has the same value as the appnIsInPcid object
            in the APPN MIB, and if the corresponding ebnIsRscvCpName
            object has the same value as the corresponding
            appnIsInFqCpName object, then the entries indexed by these
            objects are referring to the same session."

        ::= { ebnIsRscvEntry 2 }

   ebnIsRscvDestinationRoute OBJECT-TYPE
        SYNTAX OCTET STRING(SIZE (0..255))
        MAX-ACCESS read-only

        STATUS current
        DESCRIPTION
            "The route selection control vector (RSCV x'2B') used in the
            direction towards the SLU."

        ::= { ebnIsRscvEntry 3 }

   ebnIsRscvDestinationCos OBJECT-TYPE
        SYNTAX DisplayString (SIZE (1..8))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The Class of Service (COS) name used in the direction
            towards the SLU.

            Because the characters allowed in an SNA COS name come from
            a restricted character set, these names are not subject to
            internationalization."

        ::= { ebnIsRscvEntry 4 }

   -- ******************************************************************
   -- EBN Directory Config Group
   -- The following simple objects provide information about EBN
   -- directory.
   -- ******************************************************************

   ebnDirConfig            OBJECT IDENTIFIER ::= { ebnObjects 3 }

   ebnSearchCacheTime    OBJECT-TYPE
        SYNTAX Unsigned32
        UNITS "minutes"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The amount of time in minutes an extended border node will
            retain information about a multi-subnetwork search, once
            that that search terminates.  A value 0 indicates that the
            EBN has no defined limit, and the number of entries is
            bounded only by memory."

        ::= { ebnDirConfig 1 }

   ebnMaxSearchCache OBJECT-TYPE
        SYNTAX Unsigned32
        UNITS "entries"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The maximum number of multi-subnet entries to be cached.
            The value 0 indicates that the local node has no defined
            limit, and the number of entries is bounded only by
            memory."

        ::= { ebnDirConfig 2 }

   ebnDefaultSubnetVisitCount  OBJECT-TYPE
        SYNTAX Unsigned32
        UNITS "topology subnetworks"
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The default maximum number of subnetworks a LOCATE search
            procedure may traverse."

        ::= { ebnDirConfig 3 }

   -- ******************************************************************
   -- EBN COS Mapping Group
   -- The ebnCosMap Table specifies how non-native COS values are mapped
   -- to COS values defined in the native subnetwork.  The COS mappings
   -- that an EBN performs are determined by multiple factors, one of
   -- which is a set of user-defined mappings.  This table returns the
   -- COS mappings that the EBN is actually performing, rather than
   -- the user-defined mappings.
   -- ******************************************************************

   ebnCOS                  OBJECT IDENTIFIER ::= { ebnObjects 4 }

   ebnCosMapTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EbnCosMapEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The EBN COS Mapping Table.  This table specifies how non-
            native COS values are mapped to COS values defined in the
            native subnetwork.

            Note:  The COS mappings that an EBN performs are determined
            by multiple factors, one of which is a set of user-defined
            initial mappings.  This table returns the COS mappings that
            the EBN is actually performing at the time it is queried,
            rather than the user-defined initial ones."

        ::= { ebnCOS 1 }

   ebnCosMapEntry OBJECT-TYPE
        SYNTAX EbnCosMapEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the EBN COS Mapping table."

        INDEX { ebnCosMapCpName,
                ebnCosMapNonNativeCos }

        ::= { ebnCosMapTable 1 }

   EbnCosMapEntry ::= SEQUENCE {
           ebnCosMapCpName              SnaNAUWildcardName,
           ebnCosMapNonNativeCos        DisplayString,
           ebnCosMapNativeCos           DisplayString }

   ebnCosMapCpName OBJECT-TYPE
        SYNTAX SnaNAUWildcardName
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Fully qualified network CP name for which the COS mapping
            applies."

        ::= { ebnCosMapEntry 1 }

   ebnCosMapNonNativeCos OBJECT-TYPE
        SYNTAX DisplayString (SIZE(1..8))
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object contains one of the following values:

               - An 8-character COS name used in a non-native subnetwork.
               - The single character '*', identifying the entry with the
                 default native COS for a non-native CP name.  This entry
                 is used when there is no entry in the table for a
                 non-native CP name / non-native COS pair.

            Because the characters allowed in an SNA COS name come from
            a restricted character set, these names are not subject to
            internationalization."

        ::= { ebnCosMapEntry 2 }

   ebnCosMapNativeCos OBJECT-TYPE
        SYNTAX DisplayString (SIZE(1..8))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "An 8-byte name for the class-of-service, as known in the
            native subnetwork.

            Because the characters allowed in an SNA COS name come from
            a restricted character set, these names are not subject to
            internationalization."

        ::= { ebnCosMapEntry 3 }

   -- ******************************************************************
   -- EBN Subnet Routing List Group
   -- The EBN Subnet Routing List indicates to which nodes an EBN
   -- forwards search request.  This group contains information
   -- pertaining to the CONFIGURED Subnet Routing List at an EBN.  How a
   -- particular search request is routed is determined by a transient
   -- list that the EBN creates based on the configured list and other
   -- factors.
   -- *******************************************************************

   ebnSubnetRoutingList    OBJECT IDENTIFIER ::= { ebnObjects 5 }