rfc2564.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

   APPLICATION-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE,
           Counter64, Counter32, Gauge32,
           mib-2, Unsigned32, zeroDotZero   FROM SNMPv2-SMI

       DateAndTime, TEXTUAL-CONVENTION,
           TestAndIncr, TDomain,
           TimeStamp, TruthValue            FROM SNMPv2-TC

       SnmpAdminString                      FROM SNMP-FRAMEWORK-MIB

       MODULE-COMPLIANCE, OBJECT-GROUP
                                            FROM SNMPv2-CONF

       LongUtf8String, sysApplElmtRunIndex  FROM SYSAPPL-MIB;

   applicationMib MODULE-IDENTITY
       LAST-UPDATED "9811171815Z"
       ORGANIZATION "Application MIB Working Group"
       CONTACT-INFO
          "http://www.ietf.org/html.charters/applmib-charter.html

           Randy Presuhn
           BMC Software, Inc.
           965 Stewart Drive
           Sunnyvale, CA 94086
           USA

           Telephone: [phone]
           Facsimile: [phone]
           EMail: [e-mail]
          "
       DESCRIPTION
          "This MIB defines objects representing generic aspects of
           applications that are of interest to management but typically
           require instrumentation within managed application elements.
          "
       ::= { mib-2 62 }


   --
   --      Registration hierarchy for this MIB
   --
   applicationMibObjects OBJECT IDENTIFIER ::=
                            { applicationMib 1 }

   applicationMibConformance OBJECT IDENTIFIER ::=
                            { applicationMib 2 }


   --
   --      Groups defined in this MIB
   --
   applServiceGroup OBJECT IDENTIFIER ::=
                            { applicationMibObjects 1 }

   applChannelGroup OBJECT IDENTIFIER ::=
                            { applicationMibObjects 2 }

   applPastChannelGroup OBJECT IDENTIFIER ::=
                            { applicationMibObjects 3 }

   applElmtRunControlGroup OBJECT IDENTIFIER ::=
                            { applicationMibObjects 4 }


   Unsigned64TC ::= TEXTUAL-CONVENTION
       STATUS current
       DESCRIPTION
           "A non-negative 64-bit bit integer, without counter
            semantics."
       SYNTAX Counter64

   ApplTAddress ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
             "Denotes a transport service address.

             For snmpUDPDomain, an ApplTAddress is 6 octets long,
             the initial 4 octets containing the IP-address in
             network-byte order and the last 2 containing the UDP
             port in network-byte order.  Consult 'Transport Mappings
             for Version 2 of the Simple Network Management Protocol
             (SNMPv2)' for further information on snmpUDPDomain."
       SYNTAX       OCTET STRING (SIZE (0..255))

   -- ****************************************************************
   --
   --      applServiceGroup -
   --
   --      The service-level tables permit the identification of one
   --      or more instances of named services on a system, and the
   --      association of running application elements to services.
   --
   -- ****************************************************************


   -- ****************************************************************
   --
   --      The service name to service instance table
   --
   -- ****************************************************************

   applSrvNameToSrvInstTable OBJECT-TYPE
           SYNTAX            SEQUENCE OF ApplSrvNameToSrvInstEntry
           MAX-ACCESS        not-accessible
           STATUS            current
           DESCRIPTION
              "The service name to service instance table uses
               service name as its primary key, and service instance
               identifier as its secondary key.  It facilitates the
               identification and lookup of the instances of a given
               service in a system."
           ::= { applServiceGroup 1 }

   applSrvNameToSrvInstEntry OBJECT-TYPE
           SYNTAX            ApplSrvNameToSrvInstEntry
           MAX-ACCESS        not-accessible
           STATUS            current
           DESCRIPTION
              "An applSrvNameToSrvInstEntry identifies an instance of
               a given service.  The allocation and reservation
               of unique values for applSrvIndex is an administrative
               issue.

               An applSrvNameToSrvInstEntry exists for the lifetime of
               that instance of that service; the index values may not
               change during that lifetime.  "
           INDEX { applSrvName, applSrvIndex }
           ::= { applSrvNameToSrvInstTable 1 }

   ApplSrvNameToSrvInstEntry ::= SEQUENCE
           {
                   applSrvInstQual SnmpAdminString
           }


   applSrvInstQual         OBJECT-TYPE
           SYNTAX          SnmpAdminString
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "The value of applSrcInstQual provides additional
               information about this particular instance of this
               service.

               Although not used for indexing purposes, the value of
               this attribute should be sufficiently unique to be
               helpful to an administrator in distinguishing among
               service instances.  "
           ::= { applSrvNameToSrvInstEntry 1 }


   -- ****************************************************************
   --
   --      Service instance to Service Name table
   --
   -- ****************************************************************

   applSrvInstToSrvNameTable OBJECT-TYPE
           SYNTAX            SEQUENCE OF ApplSrvInstToSrvNameEntry
           MAX-ACCESS        not-accessible
           STATUS            current
           DESCRIPTION
              "The service instance to service name table uses
               service instance identifier as its primary key, and
               service name as its secondary key.  Given a service
               instance identifier, it facilitates the lookup of the
               name of the service being provided."
           ::= { applServiceGroup 2 }

   applSrvInstToSrvNameEntry OBJECT-TYPE
           SYNTAX            ApplSrvInstToSrvNameEntry
           MAX-ACCESS        not-accessible
           STATUS            current
           DESCRIPTION
              "An applSrvInstToSrvNameEntry maps a service instance
               identifier back to a service name."
           INDEX { applSrvIndex, applSrvName }
           ::= { applSrvInstToSrvNameTable 1 }

   ApplSrvInstToSrvNameEntry ::= SEQUENCE
           {
                   applSrvName     SnmpAdminString
           }

   applSrvName        OBJECT-TYPE
           SYNTAX     SnmpAdminString
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
              "The human-readable name of a service.  Where
               appropriate, as in the case where a service can be
               identified in terms of a single protocol, the strings
               should be established names such as those assigned by
               IANA and found in STD 2 [13], or defined by some other
               authority.  In some cases private conventions apply
               and the string should in these cases be consistent
               with these non-standard conventions.   An applicability
               statement may specify the service name(s) to be used.
              "
           ::= { applSrvInstToSrvNameEntry 1 }

   -- ****************************************************************
   --
   --      The service instance to running application element table
   --
   -- ****************************************************************

   applSrvInstToRunApplElmtTable OBJECT-TYPE
           SYNTAX            SEQUENCE OF ApplSrvInstToRunApplElmtEntry
           MAX-ACCESS            not-accessible
           STATUS                current
           DESCRIPTION
              "The service instance to running application element
               table uses the service instance identifier as its primary
               key, and the running application element index as its
               secondary key.  This facilitates the identification
               of the set of running application elements providing a
               given instance of a service."
           ::= { applServiceGroup 3 }

   applSrvInstToRunApplElmtEntry OBJECT-TYPE
           SYNTAX                ApplSrvInstToRunApplElmtEntry
           MAX-ACCESS            not-accessible
           STATUS                current
           DESCRIPTION
              "An applSrvInstToRunApplElmtEntry identifies a running
               application element providing an instance of a service.
               Note that there may be multiple running application
               elements involved in the provision of an instance of
               a service."
           INDEX { applSrvIndex, sysApplElmtRunIndex }
           ::= { applSrvInstToRunApplElmtTable 1 }

   ApplSrvInstToRunApplElmtEntry ::= SEQUENCE
           {
                   applSrvIndex       Unsigned32
           }

   applSrvIndex        OBJECT-TYPE
           SYNTAX      Unsigned32 (1..'ffffffff'h)
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
               "An applSrvIndex is the system-unique identifier of
                an instance of a service.  The value is unique not only
                across all instances of a given service, but also across
                all services in a system.

                Re-use of values for this index should be avoided.
                No two service instances in a given system shall
                concurrently have the same value for this index.

                The value zero is excluded from the set of permitted
                values for this index.  This allows other tables to
                potentially represent things which cannot be associated
                with a specific service instance.
               "
           ::= { applSrvInstToRunApplElmtEntry 1 }

   -- ****************************************************************
   --
   --      The running application element to service instance table
   --
   -- ****************************************************************

   applRunApplElmtToSrvInstTable OBJECT-TYPE
           SYNTAX           SEQUENCE OF ApplRunApplElmtToSrvInstEntry
           MAX-ACCESS            not-accessible
           STATUS                current
           DESCRIPTION
              "The running application element to service instance
               table uses the running application element index as
               its primary key and the service instance identifier as
               its secondary key.  It identifies the set of services
               provided by a given running application element."
           ::= { applServiceGroup 4 }

   applRunApplElmtToSrvInstEntry OBJECT-TYPE
           SYNTAX                ApplRunApplElmtToSrvInstEntry
           MAX-ACCESS            not-accessible
           STATUS                current
           DESCRIPTION
              "An applRunApplElmtToSrvInstEntry serves to identify an
               instance of a service being provided by a given running
               application element.  Note that a particular running
               application element may provide multiple services."
           INDEX { sysApplElmtRunIndex, applSrvInstance }
           ::= { applRunApplElmtToSrvInstTable 1 }

   ApplRunApplElmtToSrvInstEntry ::= SEQUENCE
           {
                   applSrvInstance         Unsigned32
           }

   applSrvInstance    OBJECT-TYPE
           SYNTAX     Unsigned32 (1..'ffffffff'h)
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
              "An applSrvInstance is the system-unique identifier of an
               instance of a service.  The value is unique not only
               across all instances of a given service, but also across
               all services.