rfc3371.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the remote tunnel Identifier."
           REFERENCE "RFC 2661, Section 3.1"
           ::= { l2tpTunnelStatsEntry 2 }

   l2tpTunnelStatsState    OBJECT-TYPE
           SYNTAX          INTEGER {
                               tunnelIdle(1),
                               tunnelConnecting(2),
                               tunnelEstablished(3),
                               tunnelDisconnecting(4)
                           }
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This field contains the current state of the
               control tunnel."
           ::= { l2tpTunnelStatsEntry 3 }

   l2tpTunnelStatsInitiated OBJECT-TYPE
           SYNTAX          INTEGER {
                               locally(1),
                               remotely(2)
                           }
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object indicates whether the tunnel was
               initiated locally or by the remote tunnel peer."
           ::= { l2tpTunnelStatsEntry 4 }

   l2tpTunnelStatsRemoteHostName OBJECT-TYPE
           SYNTAX          SnmpAdminString
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the host name as discovered
               during the tunnel establishment phase (via the Host
               Name AVP) of the L2TP peer. If the tunnel is idle
               this object should maintain its value from the last
               time it was connected."
           ::= { l2tpTunnelStatsEntry 5 }

   l2tpTunnelStatsRemoteVendorName OBJECT-TYPE
           SYNTAX          SnmpAdminString
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object identifies the vendor name of the peer's
               L2TP implementation. If the tunnel is idle this
               object should maintain its value from the last time
               it was connected."
           ::= { l2tpTunnelStatsEntry 6 }

   l2tpTunnelStatsRemoteFirmwareRev OBJECT-TYPE
           SYNTAX          Integer32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the tunnel peer's firmware
               revision number. If the tunnel is idle this object
               should maintain its value from the last time it
               was connected."
           ::= { l2tpTunnelStatsEntry 7 }

   l2tpTunnelStatsRemoteProtocolVer OBJECT-TYPE
           SYNTAX          OCTET STRING (SIZE(2))
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object describes the protocol version and
               revision of the tunnel peers implementation. The
               first octet contains the protocol version. The
               second octet contains the protocol revision."
           ::= { l2tpTunnelStatsEntry 8 }

   l2tpTunnelStatsInitialRemoteRWS OBJECT-TYPE
           SYNTAX          Integer32 (0..65535)
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the initial remote peer's
               receive window size as indicated by the tunnel peer
               (in the RWS AVP) during the tunnel establishment
               phase. If the tunnel is idle this object should
               maintain its value from the last time it was
               connected."
           ::= { l2tpTunnelStatsEntry 9 }

   l2tpTunnelStatsBearerCaps OBJECT-TYPE
           SYNTAX          INTEGER {
                               none(1),
                               digital(2),
                               analog(3),
                               digitalAnalog(4)
                           }
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object describes the Bearer Capabilities of
               the tunnel peer. If the tunnel is idle this object
               should maintain its value from the last time it was
               connected."
           ::= { l2tpTunnelStatsEntry 10 }

   l2tpTunnelStatsFramingCaps OBJECT-TYPE
           SYNTAX          INTEGER {
                               none(1),
                               sync(2),
                               async(3),
                               syncAsync(4)
                           }
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object describes the Framing Capabilities of
               the tunnel peer. If the tunnel is idle this object
               should maintain its value from the last time it was
               connected."
           ::= { l2tpTunnelStatsEntry 11 }

   l2tpTunnelStatsControlRxPkts OBJECT-TYPE
           SYNTAX          Counter32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the number of control packets
               received on the tunnel."
           ::= { l2tpTunnelStatsEntry 12 }

   l2tpTunnelStatsControlRxZLB OBJECT-TYPE
           SYNTAX          Counter32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object returns a count of the number of Zero
               Length Body control packet acknowledgement packets
               that were received."
           ::= { l2tpTunnelStatsEntry 13 }

   l2tpTunnelStatsControlOutOfSeq OBJECT-TYPE
           SYNTAX          Counter32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object returns a count of the number of
               control packets that were not received in the
               correct order (as per the sequence number)
               on this tunnel including out of window
               packets."
           ::= { l2tpTunnelStatsEntry 14 }

   l2tpTunnelStatsControlOutOfWin OBJECT-TYPE
           SYNTAX          Counter32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the number of control
               packets that were received outside of the
               offered receive window. It is implementation
               specific as to whether these packets are queued
               or discarded."
           ::= { l2tpTunnelStatsEntry 15 }

   l2tpTunnelStatsControlTxPkts OBJECT-TYPE
           SYNTAX          Counter32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the number of control
               packets that were transmitted to the tunnel
               peer."
           ::= { l2tpTunnelStatsEntry 16 }

   l2tpTunnelStatsControlTxZLB OBJECT-TYPE
           SYNTAX          Counter32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the number of Zero Length
               Body control packets transmitted to the tunnel
               peer."
           ::= { l2tpTunnelStatsEntry 17 }

   l2tpTunnelStatsControlAckTO OBJECT-TYPE
           SYNTAX          Counter32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object returns a count of the number of
               control packet timeouts due to the lack of a
               timely acknowledgement from the tunnel peer."
           ::= { l2tpTunnelStatsEntry 18 }

   l2tpTunnelStatsCurrentRemoteRWS OBJECT-TYPE
           SYNTAX          Gauge32 (0..65535)
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the current remote receive
               window size as determined by the local flow
               control mechanism employed."
           ::= { l2tpTunnelStatsEntry 19 }

   l2tpTunnelStatsTxSeq  OBJECT-TYPE
           SYNTAX          Integer32 (0..65535)
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the next send sequence number
               for the control channel."
           ::= { l2tpTunnelStatsEntry 20 }

   l2tpTunnelStatsTxSeqAck OBJECT-TYPE
           SYNTAX          Integer32 (0..65535)
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the send sequence number that
               the tunnel peer has acknowledged for the control
               channel. The flow control state can be determined
               by subtracting the l2tpTunnelStatsTxSeq from
               l2tpTunnelStatsTxSeqAck and comparing this value
               to l2tpTunnelStatsCurrentRemoteRWS (taking into
               consideration sequence number wraps)."
           ::= { l2tpTunnelStatsEntry 21 }

   l2tpTunnelStatsRxSeq  OBJECT-TYPE
           SYNTAX          Integer32 (0..65535)
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the next receive sequence
               number expected to be received on this control
               channel."
           ::= { l2tpTunnelStatsEntry 22 }

   l2tpTunnelStatsRxSeqAck OBJECT-TYPE
           SYNTAX          Integer32 (0..65535)
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the last receive sequence
               number that was acknowledged back to the tunnel
               peer for the control channel."
           ::= { l2tpTunnelStatsEntry 23 }

   l2tpTunnelStatsTotalSessions OBJECT-TYPE
           SYNTAX          Counter32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the total number of sessions
               that this tunnel has successfully connected through
               to its tunnel peer since this tunnel was created."
           ::= { l2tpTunnelStatsEntry 24 }

   l2tpTunnelStatsFailedSessions OBJECT-TYPE
           SYNTAX          Counter32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the total number of sessions
               that were initiated but failed to reach the
               established phase."
           ::= { l2tpTunnelStatsEntry 25 }

   l2tpTunnelStatsActiveSessions OBJECT-TYPE
           SYNTAX          Gauge32
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the total number of sessions
               in the established state for this tunnel."
           ::= { l2tpTunnelStatsEntry 26 }

   l2tpTunnelStatsLastResultCode OBJECT-TYPE
           SYNTAX          Integer32 (0..65535)
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the last value of the result
               code as described in the Result Code AVP which
               caused the tunnel to disconnect."
           ::= { l2tpTunnelStatsEntry 27 }

   l2tpTunnelStatsLastErrorCode OBJECT-TYPE
           SYNTAX          Integer32 (0..65535)
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the last value of the error
               code as described in the Result Code AVP which
               caused the tunnel to disconnect."
           ::= { l2tpTunnelStatsEntry 28 }

   l2tpTunnelStatsLastErrorMessage OBJECT-TYPE
           SYNTAX          SnmpAdminString
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object contains the last value of the optional
               message as described in the Result Code AVP which
               caused the tunnel to disconnect."
           ::= { l2tpTunnelStatsEntry 29 }

   l2tpTunnelStatsDrainingTunnel OBJECT-TYPE
           SYNTAX          TruthValue
           MAX-ACCESS      read-only
           STATUS          current
           DESCRIPTION
              "This object indicates if this tunnel is draining
               off sessions. This object will return false(2) when
               the tunnel is not draining sessions or after the
               last session has disconnected when the tunnel is in
               the draining state.